Flammability Testing Equipment

Durable Experimental Automotive Interior Material Burning Instrument First, the introduction The automotive interior material burning test device is designed strictly according to the technical requirements of the national standard GB8410-2006 "Combustion characteristics of automotive interior materials", and meets the simulated combustion requirements of the US automotive safety technical regulations FMVSS 571.302 and other standards. Performance safety test items, German

Durable Single Wire and Cable Vertical Combustion Burner First, the scope of use (no need to match the air compressor to ensure the accuracy of the test) The single wire and cable vertical burning tester is mainly for the flammability of a single wire and cable with a conductor diameter greater than 8 mm (cross-sectional area greater than 0.5 mm2) or less than 8 mm (cross-sectional area less than 0.5 mm2). It is suitable for the research, production and quality inspection

Fireproof Coating Tester DBF-3 type fireproof coating large plate method measuring instrument is designed and manufactured according to the technical requirements of national standard GB12441-2005. It retains all functions of DBF51-1, and adds five way backfire, computer interface and corresponding Software, test equipment that fully meets the requirements of national standards, reasonable product design structure, convenient operation and maintenance, high degree of

Single Wire and Cable Vertical Combustion Burner First, the scope of use (no need to match the air compressor to ensure the accuracy of the test) The single wire and cable vertical burning tester is mainly for the flammability of a single wire and cable with a conductor diameter greater than 8 mm (cross-sectional area greater than 0.5 mm2) or less than 8 mm (cross-sectional area less than 0.5 mm2). It is suitable for the research, production and quality inspection departments

Building Materials Flammability Test Furnace Chinese and English bilingual control panel; With Chinese and English bilingual equipment operating instructions;New high-pressure auto-ignition and knob-assisted gas flow adjustment! First, the scope of use The JCK-2 type building material flammability test furnace is a test method for determining whether a building material has flammability under specified conditions, and is developed according to the technical parameters

Needle Flame Testing Machine The needle flame testing machine is designed and manufactured according to the corresponding requirements of IEC60695-2-2, GB5169.5-97, GB4706.1-98, and is suitable for the flame resistance test of non-metallic materials. The instrument is easy to operate and uses imported instruments (Autonics). The combustion chamber is sprayed with steel structure and is reliable. It is one of the key equipment for non-metallic materials' flame resistance test.

Electrician Casing Flame Retardant Tester First, electrical casing flame retardant tester {PVC flame retardant electrical casing combustion self-extinguishing time (vertical combustion) tester} scope of use The flame retardant PVC electrical casing self-extinguishing burning time tester used for building cold bending electrical insulation flame retardant PVC casing and accessories flame retardant performance measurement, and accord with JG3050-1998 fabric construction in

Quick Details Place of Origin: Shanghai, China (Mainland) Brand Name: GLOMRO Model Number: MRO-5660 Power: Electronic Sample pressure: 1N ± 0.2 N Temperature range: 500-1000C ±2C adjustable Ironing into depth: 7mm ± 0.5 mm Glow wire: diameter 4mm±0.04mm Ni Fire out time: 0-999.9 s Test speed: 18±3mm/s Thermocouple: Imported B+B type Light-off Time: 0-999.9 s ± 0.1 s Inner box volume: 0.5M3 Supply Ability: 300 Set/Sets per Month Packaging & Delivery Packaging Details Standard

Thermal Insulation Rock Wool Thermal Load Test Device First, the scope of use The thermal insulation rock wool thermal load test device is a test device developed according to the technical conditions stipulated in the National Standard GB/T11835-2007 "Adiabatic Rockwool, Slag Cotton and Products" of the People's Republic of China. Second, product features The product has reasonable structure, high touch screen control, high degree of automation, accurate recording time,

Textile Vertical Burner First, the scope of use Suitable for all types of fabrics and their products. Test method applicable to the burning performance of the bottom edge of the vertical textile specified in GB5455-2014 standard. Second, to technical parameters 1. The equipment is divided into two parts: the control part and the combustion box. The size of the combustion box is 330*330*765mm.2. The front part of the combustion box is a tempered glass observation door3. The

Digital Oxygen Index Tester Product Name: Digital Oxygen Index Tester First, the scope of application: Suitable for the determination of the burning properties of plastics, rubber, fiber, foam, film and film and textile materials Second, the main technical parameters: 1. Using imported oxygen sensor, the digital display shows the oxygen concentration without calculation, the accuracy is higher and more accurate, the range is 0-100%2. Digital resolution: ±0.1%3. Measurement

Building Materials Combustion Apparatus Flammability Testing Equipment Chinese and English bilingual control panel; With Chinese and English bilingual equipment operating instructions;New high-pressure auto-ignition and knob-assisted gas flow adjustment! First, the scope of use The JCK-2 type building material flammability test furnace is a test method for determining whether a building material has flammability under specified conditions, and is developed according to the

Fireproof Coating Tester (small room method) First, the scope of use The instrument is suitable for quantitatively testing the flame retardant properties of fireproof coatings applied on the surface of substrates under laboratory conditions, and evaluating the advantages and disadvantages of fireproof coatings by the weight loss of combustion and the volume of carbonization. Second, the main technical parameters 1. The dimensions of the instrument are about 340mm × 230mm ×

Oxygen Index Tester First, the scope of application: Suitable for the determination of the burning properties of plastics, rubber, fiber, foam, film and film and textile materials Second, the main technical parameters: 1. Flow meter display2. Machine accuracy: 2.53. Flow adjustment range: 0-10L/min (60-600 L/h)4. Oxygen input pressure: >0.25Mpa5. Measurement range: 0 ~ 100% O2;6. Burning cylinder: inner diameter ≥75mm total 450mm7. Gas flow rate in the combustion cylinder:

Stainless Steel Fireproof Coating Tester (small room method) First, the scope of use The instrument is suitable for quantitatively testing the flame retardant properties of fireproof coatings applied on the surface of substrates under laboratory conditions, and evaluating the advantages and disadvantages of fireproof coatings by the weight loss of combustion and the volume of carbonization. Second, the main technical parameters 1. The dimensions of the instrument are about

Fireproof coating tester (tunnel method) First, the scope of use It is suitable for testing the flame propagation characteristics of fireproof coatings applied to the surface of substrates under laboratory conditions, as well as assessing the protective effect of fire retardant coatings on substrates and the pros and cons of their flame propagation properties. Second, product features 1. The tunnel furnace is made of metal steel frame welded, with firm structure and

Digital Oxygen Index Analyzer Product Name: Digital Oxygen Index TesterTIPS: Digital Oxygen Index Tester with temperature controller to control temperature, the other parameters are consistent with JF-3 type digital oximetry index analyzer. First, the scope of application: Suitable for the determination of the burning properties of plastics, rubber, fiber, foam, film and film and textile materials Second, the main technical parameters: 1. Using imported oxygen sensor, the

Foam Horizontal Vertical Burning Tester Flammability Test Equipment First, the scope of use It is suitable for the evaluation of the horizontal burning properties of small samples of foams with a density of less than 250 kg/m3 as determined by ISO 845:1985 under small flames under laboratory conditions. Second, the main technical parameters 1. Ambient temperature: -10 ° C ~ 30 ° C2. Relative humidity: ≤85%3. Power supply voltage and power: 220V±10% 50HZ power less than 100W4.

Horizontal Vertical Burner CZF-3 horizontal and vertical burning tester is developed according to the national standard GB2408-1996 "Test method for plastic burning performance - horizontal method and vertical method", which fully meets the technical requirements of national standard GB/T2408. The test can be carried out in two ways of plastic horizontal burning and vertical burning in the same instrument, and the test time can be automatically recorded and saved. Compared

Automotive Interior Material Burning Tester First, the scope of use The economical split-type automotive interior material combustion tester is mainly for qualitative evaluation of the flammability of automotive interior materials. It is suitable for the research, production and quality inspection departments of various types of automotive interior materials manufacturers and their material components. It is also suitable for insulating materials, engineering plastics or