Alloy Steel Pipe

ASTM B622 UNS N10276 Hastelloy Pipe C 276 Seamless Pipe Tube Custom Size 1/2-48' 1. Hastelloy C276 Welded Pipe Specifications Specifications : ASTM B619 Dimensions : ASTM, ASME and API Size : 15″NB TO 150″NB IN Specialized in : Large Diameter Size Schedule : SCH5, SCH10, SCH40, STD, SCH80, SCH160 Type : RW / Welded Form : Round, Hydraulic Etc Length : Single Random, Double Random & Cut Length. End : Plain End, Beveled End, Treaded 2. Other Pipe Tube we have Type Seamless Pipe

ASTM Hastelloy C -276 Alloy C -276 DIN 2.4819 Duplex Steel Pipes Seamless or Welded 1. Hastelloy C-276 Seamless Welded Pipes Tubes Specifications : ASTM B622, B619, B626 / ASME SB622, SB619, SB626 Standard : ASTM, ASME and API Size Range : 15"NB – 150"NB Outer Diameter : 1.250″ – 6.000″ (30-150mm) Wall Range : 0.095″ – 1.000″ (.2.5-25mm) Schedule : SCH 10, SCH20, SCH30, SCH40, STD, SCH60, XS, SCH80, SCH120, SCH140, SCH160, XXS Type : Seamless / ERW / Welded / Fabricated /

ASME SB626 DIN 2.4602 Hastelloy Pipe Hastelloy C22 Nickel Cobalt Alloy Welded This specification covers welded tubes made form the nickel and nickel-cobalt alloys(UNS N10001, UNS N10665, UNS N12160, UNS N10629, UNS N10675, UNS N10276, UNS N06455, UNS N06007, UNS N06975, UNS N08320, UNS N06985, UNS N06002, UNS N06022, UNS N06030, UNS N06059, UNS N08031, UNS N30556, UNS N06230, UNS N06686, and UNS R20033) listed in Table 1 intended for heat exchanger and condenser tubes and

ASTM A333 Grade 3 Stable High Strength Alloy Steel Pipe Low Temperature Steel Pipe 2.0mm - 14 Mm 1. ASTM A335 P5, P9, P11, P22, P91 Seamless Pipes, Tubes Specifications, Stock and Supply Range Size Range : 1/2” NB to 36” NB Alloy Steel Pipes Specifications : ASTM A/ASME SA 335 P1, P2, P5, P9, P11, P12, P22, P23, P91, and P92 Thickness Range: SCH 40, SCH 80, SCH 160, SCH XS, SCH XXS, All Schedules, upto 12mm thk Type : Seamless / ERW / Welded / Fabricated / CDW Form: Round

Alloy Steel Pipe ASTM A335 P5 Durable Seamless Heavy Duty High Toughnesss Ordering Information Orders for material under this specification should include the following, as required, to describe the desired material adequately: 1 Quantity (feet, centimetres, or number of lengths), 2 Name of material (seamless alloy steel pipe), 3 Grade, 4 Manufacture (hot-finished or cold-drawn), 5 Size (NPS or outside diameter and schedule number or average wall thickness), 6 Length

Alloy Steel Pipe EN10216-3 690QL1 Fine Grain Ground SurfaceHigh Pressure Material identification Each tube made of steel grades P460 , P620 and P690 shall be tested by an appropriate method to ensure that the correct grade is being supplied. Seamless Steel Tube Specifications Standard : EN10216-3 Outside Diameter: 325-1067 mm Wall Thickness: 9.53-140 mm Length: On the request Leak-tightness The tubes shall pass a hydrostatic test or electromagnetic test for leak tightness.

Alloy Steel Seamless Tube EN10216-3 620QH Seamless Alloy Pipe Fine Grain Product Description EN 10002-1, Metallic materials - Tensile testing - Part 1: Method of test (at ambient temperature). EN 10002-5, Metallic materials - Tensile testing - Part 5: Method of testing (at elevated temperature). EN 10020, Definitions and classification of grades of steel. EN 10021, General technical delivery requirements for steel and iron products. EN 10045-1, Metallic materials - Charpy

Alloy Steel Seamless Tube EN10216-3 620QH Seamless Alloy Pipe Fine Grain Appearance 1 The tubes shall be free from external and internal surface defects, that can be detected by visual examination. 2 The internal and external surface finish of the tubes shall be typical of the manufacturing process and, where applicable, the heat treatment employed. Normally the finish and surface condition shall be such that any surface imperfections requiring dressing can be identified.

Alloy Steel Pipe EN10216-3 460NL1 Seamless High Mechanical Properties Material identification Each tube made of steel grades P460 , P620 and P690 shall be tested by an appropriate method to ensure that the correct grade is being supplied. Seamless Steel Tube Specifications Standard : EN10216-3 Outside Diameter: 325-1067 mm Wall Thickness: 9.53-140 mm Length: On the request Leak-tightness The tubes shall pass a hydrostatic test or electromagnetic test for leak tightness. Non

Seamless Steel Tube EN10216-3 P355NL1 High Pressure Seamless Alloy Steel Pipe Test methods 1 Tensile test 1.1 Tensile test at room temperature, the test shall be carried out at room temperature in accordance with EN 10002-1 1.2 Tensile test at elevated temperature, the test shall be carried out in accordance with EN 10002-5 at 400 °C or 300°C 2 Flattening test shall be carried out in accordance with EN 10233. 3 Ring tensile test shall be carried out in accordance with EN

Alloy Steel Pipe EN10216-2 X10CrMoVNb9-1 Seamless Hot Finished / Cold Drawn Chemical composition, % Grade C Si Mn P, max S, max Cr Mo Ni Al Cu Nb Ti, max V Cr+Cu +Mo+Ni Others P235GH ≤0.16 ≤0.35 ≤1.20 0.025 0.020 ≤0.30 ≤0.08 ≤0.30 ≥0.02 ≤0.30 ≤0.01 0.040 ≤0.02 ≤0.70 - P265GH ≤0.20 ≤0.40 ≤1.40 0.025 0.020 ≤0.30 ≤0.08 ≤0.30 ≥0.02 ≤0.30 ≤0.01 0.040 ≤0.02 ≤0.70 13CrMo4-5 0.10-0.17 ≤0.35 0.40-0.70 0.025 0.020 0.70-1.15 0.40-0.60 ≤0.30 ≤0.040 ≤0.30 - - - - - 10CrMo9-10 0.08-0.14 ≤0

Seamless Alloy Steel Pipe 2' SCH10S EN10216-2 X10 Hot Finished / Cold DrawnCrMoVNb9-1 Seamless Steel Tube Specifications Standard : EN10216-2 Outside Diameter: 325-1067 mm Wall Thickness: 9.53-140 mm Length: On the request Mechanical properties Steel grade Upper yield strength or proof strength ReH or Rp0,2 for Wall Thickness T min. Tensile strength Rm Elongation A min. % T≤16 16

Alloy Steel Pipe EN10216-2 15NiCuMoNb5-6-4 Round Seamless Boiler Tubes Large Diameter Size EN 10002-1, Metallic materials - Tensile testing - Part 1: Method of test (at ambient temperature). EN 10002-5, Metallic materials - Tensile testing - Part 5: Method of testing (at elevated temperature). EN 10020, Definitions and classification of grades of steel. EN 10021, General technical delivery requirements for steel and iron products. EN 10027-1, Designation systems for steels -

Alloy Steel Pipe EN10216-2 10CrMo9-10 Seamless Steel Pipe PE BE Oil The tubes shall be manufactured by a seamless process. Option: The tubes shall be cold finished before heat treatment. Chemical composition, % Grade C Si Mn P, max S, max Cr Mo Ni Al Cu Nb Ti, max V Cr+Cu +Mo+Ni Others P235GH ≤0.16 ≤0.35 ≤1.20 0.025 0.020 ≤0.30 ≤0.08 ≤0.30 ≥0.02 ≤0.30 ≤0.01 0.040 ≤0.02 ≤0.70 - P265GH ≤0.20 ≤0.40 ≤1.40 0.025 0.020 ≤0.30 ≤0.08 ≤0.30 ≥0.02 ≤0.30 ≤0.01 0.040 ≤0.02 ≤0.70 13CrMo4-5

Alloy Steel Pipe EN10216-2 13CrMo4-5 Seamless Pressure Pipe Seamless Steel Pipe Hot Rolled Appearance 1 The tubes shall be free from external and internal surface defects that can be detected by visual examination. 2 The internal and external surface finish of the tubes shall be typical of the manufacturing process and, where applicable, the heat treatment employed. Normally the finish and surface condition shall be such that any surface imperfections requiring dressing can

Alloy Steel PipeEN10216-2 P265GH Seamless Wall Thickness 9.53-140 Mm Deoxidation process Steels shall be fully killed. The tubes shall be manufactured by a seamless process. Option: The tubes shall be cold finished before heat treatment. Chemical composition, % Grade C Si Mn P, max S, max Cr Mo Ni Al Cu Nb Ti, max V Cr+Cu +Mo+Ni Others P235GH ≤0.16 ≤0.35 ≤1.20 0.025 0.020 ≤0.30 ≤0.08 ≤0.30 ≥0.02 ≤0.30 ≤0.01 0.040 ≤0.02 ≤0.70 - P265GH ≤0.20 ≤0.40 ≤1.40 0.025 0.020 ≤0.30 ≤0.08

Alloy Steel Seamless Pipe EN10216-2 P235GH For Elevated Temperature Service Seamless steel tubes for pressure purposes Non-alloy steel tubes with specified elevated temperature properties Alloy steel tubes with specified elevated temperature properties The requirements of this European Standard rule when they differ from those in the standards and documents referred to below: EN 10002-1, Metallic materials - Tensile testing - Part 1: Method of test (at ambient temperature).

Electric Fusion Weldding pipe Cr - Mo alloy steel pipes ASTM A691 1Cr 3Cr 5Cr 9Cr Heat Treatment of A691 1-1/4CR, 2-1/4CR, 5CR, 9CR, 91 Alloy Steel EFW Pipes Pipe Grade ASTM Specification Post-Weld Heat-Treat Temperature Range (Stress Relieving), °F (°C) Normalizing Temperature max unless otherwise noted, Quenching Temperature max unless otherwise noted,°F (°C) Tempering Temperature, min, °F (°C) CM-65 A 204/A 204M 1100 to 1200 (590 to 650) 1700 (925) … … CM-70 A 204/A 204M

Nickel Alloy Steel Seamless bend tube 100% PT , ET, UT ,ASTM B167 UNS N06600,N06601 Material Grade/Standard Available Nickel Alloy Material Grade ( ASTM/ASME) Standard Available Inconel UNS N06600 UNS N06601 UNS N06625 UNS N08800 UNS N08810 UNS N08825 ASME SB167 SB423 SB407 SB444 Monel UNS N04400 ASME SB165 SB163 Hastelloy UNS N10276 ( C 276) N06022(C 22) N06455(C 4) ASME SB626 SB622 Size Range: Seamless Pipe OD: Φ16mm-Φ114mm; WT:1.0mm-20mm Welded Pipe OD: Φ10mm-Φ273mm; WT

Alloy Steel Pipe Cold Roll Annealed Pipe DIN 17458 EN10216 5 D4 T4 For Automotive Fuel Lines BoYue Energy Technology deals with Austenitic Stainless Steel, Nickel Alloy Steel(Hastelloy , Monel, Inconel, Incoloy ) seamless and welded pipe and tube already more than 35 years, every year sells more than 50000 tons of steel pipe and tube. Our client already covers more than 30 countries, Like Italy, UK, Gernmany, USA, Canada, Chile, Colombia, Saudi Arabia, Russia, Korea,