SS Steel Plate

GB713 12Cr1MoV Boiler and Pressure Vessel Steel Plate 12Cr1MoV pipe is High-hardness high-viscosity high-pressure steam pipe apply in the power plant.It is commonly used for pressure pipes in thermal power plants. 12Cr1MoV Chemical Composition Chart (%) Material C Si Mn Cr Mo V 12Cr1MoV 0.08~0.15 0.17~0.37 0.40~0.70 0.30~0.60 0.15~0.35 0.15~0.30 Alloy Steel 12Cr1MoV Mechanical Properties Analysis Material Tensile Strength (MPa) Yield Strength (MPa) Elongation (%) A335 P22

Product Description Chemical Component C Si Mn Cr N P S Ni MAX % 0.15 0.75 5.5-7.5 16-18 0.25 0.06 0.03 3.5-5.5 Specification Grade 201,202 Thickness Cold rolled:0.2-3.0mm Hot rolled:3.0-60mm Length As customer’s requirement Surface Finish 2B,2D,BA,NO4, Hair Line,6K, etc Manufacture Technology Cold rolled/ Hot rolled Material DDQ, High Copper, Half Copper or Low Copper Material Standard JIS, ASTM, AISI, GB, DIN, EN, etc we usually use ASTM and GB Standard Surface Treatment

Titanium Alloy Grade 9 / Ti 3Al-2.5V (UNS R56320) Description Titanium Grade 9 is a near alpha, alpha-beta alloy. It offers much more strength than CP titanium, and unlike Ti-6-4 can be cold worked resulting in moderately high strength and good ductility. It is as weldable as the CP grades and has excellent resistance to corrosion. Industries Supplied Architecture, medical, marine, processing & chlorate manufacturing, dimensional stable anodes, and desalination. Nominal

SA516Gr55|AMSE SA516 Grade 55|SA516 Gr.55 STEEL PLATE Boiler and Pressure Vessel Steel Plate​ AMSE SA516 standard specification for pressure vessel plates, carbon steel for moderate and lower- temperature service. AMSE SA516 plates 40mm and under in thickness is normally supplied in the as-rolled condition. The plates may be ordered normalized or stress relieved, or both. AMSE SA516 grade plates over 40mm in thickness shall be normalized. Supplementary Technology: HIC Test |

ASME SA387 SA387 GR.11/12/22 Boiler and Pressure Vessel Steel Plate SA 387 GR.11 Equivalent Grades : Grade BS ASTM/ASME UNS EN GR.11 621B A387 / SA 387 K11789 - GR.12 620B A387 / SA 387 K11757 3 CRMO 45 GR.22 622-515B A387 / SA 387 K21590 10 CRMO 910 Chemical Composition of ASME SA387 GR.11/12/22 Perforated Sheets Grade C Mn P S Si Cr Mo SA387 Gr 11 0.05 - 0.17 0.40 - 0.65 0.025 0.025 0.50 - 0.80 1.00 - 1.50 0.45 - 0.65 SA387 Gr 12 0.04 - 0.17 0.35 - 0.73 0.035 0.035 0.13 - 0

Stainless Steel Angle Stainless Steel Angle is a product which has two legs to form a 90 degree angle. This product is designed to be used in both structural applications and general fabrication. Stainless Steel Angle's range of applications are wide and can include trailer manufacturing, safety cages, walkways and farming equipment. It's generally used anywhere where it is important to improve the structure's rigidity. 316 Stainless Steel Angle Stainless Steel Angle 316 is

GB713 Q370R Boiler and pressure vessel steel plate Q370R Adopt standard: GB/T 713 Standard Specification for boiler and pressure purposes, technical delivery condition and non alloy, alloy steels with specified elevated temperature properties. Q370R Specification: Thickness: 5mm to 200mm; Width: 1500mm to 3500mm: Length: 3000mm to 27000mm Third Party Inspection for Q370R: ABS, DNV, BV, GL, CCS, LR, RINA, KR, NK, CE, SGS, IKE, IEI or other quality department. Q370R Chemical

GB713 Q345R Boiler and pressure vessel steel plate Q345R is a combination of 16Mng, 19 Mng and GB6654-1996, and GB150 specified the thickness range is 3 ~ 200mm. The limit value of the tensile strength with low carbon content and standard is no more than 540Mpa, and it has good weldability, in common conditions cold and hot crack are not easy to form. However, the same as the 20 # carbon manganese structure steel, with large thickness and in low ambient temperature working

ASME SA537 Class 1 Equivalent Standard : Steel Grade JIS Germany ASTM/ASME G3115 DIN17155 A537 / SA537 SPV36 19Mn5 ASTM A537 Class 1 Chemical Composition : C Mn P S Si Cr Cu Ni Mo ≤ 40 mm > 40 mm 0.24 max 0.70/1.35 1.00/1.60 0.035 0.035 0.15/0.50 0.025 0.35 0.25 0.080 ASME SA537 / ASTM A537 - Class 1 Mechanical Properties : Grade Heat Treatment Yield (MPa) Tensile (MPa) Elongation Thickness A50mm A200mm SA537 Class 1 Normalized 345 485/620 22% 18% ≤ 65 310 450/585 22% 18% >

ASME SA516 Grade 60 - Boiler Quality Steel Plates And Pressure Vessels Steel Plates SA 516 Boiler Steel Plates are applicable in various industries such as gas processing, pharmaceuticals, chemical equipment, heat exchanger, condenser, pulp & paper industry, petrochemicals, off-shore oil drilling companies, seawater equipment, power generation, and many more. The company manufactures all household stainless steel, high nickel alloys, and carbon steel plates. These plates are

GB/T 24186 NM360 High strength abrasion resistant steel plates for construction NM360 are steel grades of wear steel plate made of Wugang, which is used for high wear and high impact applications, it can also be used as high strength structural steel with yield strength larger than 800MPa. The premise of the steel plate has a good impact toughness and welding performance without loss of strength. It is a domestic steel standard in China for manufacture of Excavators, loaders,

ASTM A516 Grade 60 Boiler and Pressure Vessel Steel Plate ASTM A516 Grade 60 is a boiler and pressure vessel quality steel which is ideal for moderate and lower temperature service. The material is used extensively by industrial boiler and pressure vessel fabricators who provide manufacturing support to the oil, gas and petrochemical industry. The steel has good weldability and excellent notch toughness. Please refer to the data tables below. Should your require a pressure

DC01 Steel Strip EN 10271: 1999 Electrolytically zinc-nickel (ZN) coated steel flat products. It is a non-alloy cold-rolled steel with very low carbon content. It is often used in the automotive industry and for making electronic components. The low carbon content of this steel makes it very easy to work with. It can be welded, brazed and soldered without any issues. It is also very ductile, meaning it can be easily formed into different shapes. This makes it ideal for use in

Incoloy® 330 is designated as UNS N08330 and W. Nr. 1.4886. Bars and Shapes: ASTM B 511, ASME SB 511 Billets and Bars: ASTM B 512, ASME SB 512 Pipe and tube: ASTM B 535; ASME SB 535, ASTM B 546; ASME SB 546, ASTM B 710; ASME SB 710, ASTM B739; ASME SB 739, ASTM B 829/ASME SB 829. Plate. Sheet and Strip: ASTM B 536, ASME SB 536, SAE AMS 5592 Bars, Wire, Forgings and Rings: SAE AMS 5716 Other: ASTM B 366/ASME SB 366 Chemical Composition: The chemical composition of INCOLOY

Stainless Steel grade Grade Chemical composition C≤ Si≤ Mn≤ P≤ S≤ Ni Cr 201 0.15 1.00 5.5-7.5 0.5 0.03 3.50-5.50 16.00-18.00 202 0.15 1.00 7.5-10.0 0.5 0.03 4.00-6.00 17.00-19.00 304 0.08 1.00 2.00 0.045 0.03 8.00-11.00 18.00-20.00 304L 0.03 1.00 2.00 0.045 0.03 8.00-12.00 18.00-20.00 309 0.2 1.00 2.00 0.04 0.03 12.00-15.00 22.00-24.00 309S 0.08 1.00 2.00 0.045 0.03 12.00-15.00 22.00-24.00 310 0.25 1.50 2.00 0.04 0.03 19.00-22.00 24.00-26.00 310S 0.08 1.00 2.00 0.045 0.03 19

stainless steel plate and coil flat plate durable quality for sale Type Qiukin stainless steel-- stainless steel plate Thinckness 0.3mm-60mm Widthness 50mm~2000mm or customized Length 1000mm~8000mm or customized Brand name TISCO,JISCO,BAOSTEEL,POSCO,LIANZHONG,ETC Standard JIS, AISI, ASTM, GB, DIN, EN Material 316L 316 321 430 201 304 Surface 2B,BA,HL,BK,NO.1,NO.4,8K,SB,etc Certificate We accept the third inspections--SGS-BV etc. Application Bridge, Shipbuilding,roofing,Car,

ASME SA16 GR. 70 Pressure Vessel Material SA16 GR. 70 Hot Rolled Steel Plate Price Per Ton SA516 grade 70 hot rolled steel plate Specification According to client's need SA516 grade 70 hot rolled steel plate Density 7.85 g/cm ³ Additional Condition AR, TMCP, PWHT, N, Q+T, Z Direction Test(Z15,Z25,Z35), Charpy V-Notch Impact Test, UT, The Third Party Test (such as SGS Test) SA516 grade 70 hot rolled steel plate Chemical Composition: Chemical elements Percentage % Chemical

AISI 4140 Alloy Steel | 1.7225 | SCM440 | 42CrMo4 Alloy Steel Plate 4140 is a flat shaped, plate of oil-hardening, chromium-molybdenum 4140 steel. It has good strength and wear resistance, excellent toughness and ductility. 4140 Alloy steel has the ability to resist stress and creep at prolonged high temperatures (up to 1000°F). 4140 Alloy Steel is also available in leaded grades which greatly improves machinability. However leaded grades should not be used in applications

1.Product Description Thickness 0.3-100mm Width 600mm, 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc Surface BA/2B/NO.1/NO.4/8K/HL Quality test we can offer MTC(mill test certificate) Payment terms L/C T/T (30%DEPOSIT) Stock or not enough stock Sample Provided Freely Container Size 20ft GP: 5898mm(Length)x2352mm(Width)x2393mm(High) 40ft GP: 12032mm(Length)x2352mm(Width)x2393mm(High) 40ft HC: 12032mm

Type Qiukin stainless steel-- stainless steel plate Thinckness 0.3mm-60mm Widthness 50mm~2000mm or customized Length 1000mm~8000mm or customized Brand name TISCO,JISCO,BAOSTEEL,POSCO,LIANZHONG,ETC Standard JIS, AISI, ASTM, GB, DIN, EN Material 316L 316 Surface 2B,BA,HL,BK,NO.1,NO.4,8K,SB,etc Certificate We accept the third inspections--SGS-BV etc. Application Bridge, Shipbuilding,roofing,Car, etc Standard coil