Nickel Alloy Pipe

High quality S32750 Duplex stainless steel pipe fitting 1. Product description Product name High quality S32750 Duplex stainless steel pipe fitting Grade High quality S32750 Duplex stainless steel pipe fitting Standard BS, JIS, GB, DIN, ASTM, API, ASTM Surface polishing,annealing,bright annealing and acid pickling Wall Thickness 0.15-150mm Outer Diameter 4mm-2500mm Length AS PER CUSTOMER Usage Widely used in the areas such as Sanitary,food industry, Decoration,construction

High quality N06200 Duplex stainless steel pipe fitting IntroductionAlloy C-2000 Alloy C-2000 (UNS N06200) along with the other C-type alloys (UNS N10276) is a quite versatile Ni-Cr-Mo alloy with excellent resistance to pitting, stress-corrosion cracking, and crevice corrosion. The technical objective of the design of Hastelloy C-2000 was even greater versatility, as compared with the traditional Ni-Cr-Mo alloys. This was accomplished by use of a high chromium content (23%),

A333 Alloy Steel Coil Plate Bar Pipe Fitting Flange Square Tube Round Bar Hollow Section Rod Bar Wire Sheet Production Description: 1. Steel Grade: A333 2. Product Name: A333 Alloy Steel Pipe Gr. 6 for Low Temperature Service 3. Length: 5.8m-12m 4. Outside diameter: 10mm-90mm (DN6-DN50) 5. Wall thickness: 1mm to 10mm CHEMICAL COMPOSITION (CAST ANALYSIS) IN% Steel grade Delivery condition C Max Si Min Mn P max S max GRADE 6 Heat-treatment 0.30 0.10 0.29-1.06 0.025 0.025

High quality N06625 Duplex stainless steel pipe fitting Introduction Inconel 625 is a Nickel-Chromium-Molybdenum alloy with excellent corrosion resistance in a wide range of corrosive media, being especially resistant to pitting and crevice corrosion. It is a favourable choice for sea water applications. Chemical Composition of Inconel 625 The compositional range for Inconel 625 is provided in the table below. Element Content Ni 58% min Cr 20 - 23% Mo 8 - 10% Nb+Ta 3.15 - 4

High quality S32205 Duplex stainless steel pipe fitting 1. Product description Product name High quality S32205 Duplex stainless steel pipe fitting Grade High quality S32205 Duplex stainless steel pipe fitting Standard BS, JIS, GB, DIN, ASTM, API, ASTM Surface polishing,annealing,bright annealing and acid pickling Wall Thickness 0.15-150mm Outer Diameter 4mm-2500mm Length AS PER CUSTOMER Usage Widely used in the areas such as Sanitary,food industry, Decoration,construction

Nickel Alloy 718 Inconel 718 (UNS N07718) 2.4668 alloy steel Pipe 1.Product Description Inconel Alloy 718 Nickel Alloy Sheet Stainless Steel Plate N07718 Inconel718 alloy containing niobium, precipitation hardened nickel-molybdenum alloy ferrochrome, high strength at 700 Degree, good toughness and high temperature environment in both corrosion resistance. Delivery status can be solution treated or precipitation hardened state. It has easy processing; has a high tensile

Inconel x750 N07750 2.4669 stainless steel pipe We are professional Inconel X750,Inconel X-750,UNS N07750,UNS No7750,Alloy X750,Alloy X-750,Inconel Alloy X750,Inconel Alloy X-750 material factory from china. We could supply inconel X-750 material in the forms of Forging parts,Forged Rings,Rolled Rings,forged shafts, hollow bars,tube sheets, forged discs,forged sleeves,round Bars,rods,flanges, Casting Parts,Pipe Fittings,elbows, reducer, tee, seamless pipe,Weled Pipes,tubings

Features: Hastelloy C-276 has excellent resistance to localized corrosion, stress corrosion cracking, and to both oxidizing and reducing media, thus making it suitable for a wide variety of chemical process environments, including ferric and cupric chlorides, hot contaminated media (organic and inorganic), formic and acetic acids, seawater and brine solutions. It is one of the few materials that withstands the corrosive effects of wet chlorine gas, hypochlorite and chlorine

Introduction Nicrofer 6023 alloy is a nickel-chromium-iron alloy with excellent resistance to corrosion and oxidation at elevated temperatures. The alloy is precipitation-hardenable, and exhibits good mechanical properties at high temperatures. The following datasheet will provide an overview of nicrofer 6023 alloy. Chemical Composition The chemical composition of nicrofer 6023 alloy is outlined in the following table. Element Content (%) Nickel, Ni 58-63 Chromium, Cr 21-25

If you are planning to buy incoloy 925 China from professional incoloy 925 manufacturers China and suppliers China, please feel free to contact Bozhong Group, equipped with productive factory, we are always at your service. UNS Trademark N09925 Incoloy 925 Chemical Composition: Grade % Ni Cr C Mn Fe Incoloy 925 Min 42 19.5 Rest Max 46 23.5 0.03 1 Si Cu Mo S Al Ti P 1.5 2.5 0.15 1.9 0.5 3 3.5 0.03 0.5 2.4 0.03 Physical Performance: Density 8.14 g/cm3 Smelt 1343 Heat Treatment

If you are planning to buy inconel625 China from professional inconel625 manufacturers China and suppliers China, please feel free to contact Bozhong Group, equipped with productive factory, we are always at your service. GB/T UNS JIS Trademark W.Nr NS336 N06625 NCF625 Inconel625 2.4856 Chemical Composition: Grade % Ni Cr Mo Nb Fe Mn Inconel625 Min Rest 20 8 3.15 - - Max 23 10 4.15 5 0.5 C Si Al Ti P S Co - - - - - - - 0.1 0.5 0.4 0.4 0.015 0.015 1 Physical Performance:

Introduction Nickel 201 alloy is a commercially pure wrought alloy having properties similar to that of nickel 200 alloy, but with a lower carbon content to avoid embrittlement by inter-granular carbon at high temperatures. It is resistant to acids and alkalis, and dry gases at room temperature. It is also resistant to mineral acids depending on the temperature and concentration of the solution. The following section will discuss in detail about nickel 201 alloy. Chemical

Introduction Inconel 718 is a Nickel-Chromium alloy being precipitation hardenable and having high creep-rupture strength at high temperatures to about 700°C (1290°F). It has higher strength thanInconel X-750 and better mechanical properties at lower temperatures than Nimonic 90 andInconel X-750. Chemical Composition of Inconel 718 The compositional range for Inconel 718 is provided in the table below. Element Content Ni+Co 50 – 55 % Cr 17 – 21 % Fe BAL Nb+Ta 4.75 – 5.5 % Mo

Introduction Super alloys are also referred to as high performance alloys. They have good creep and oxidation resistance, and are utilized where high surface stability is required. They also have an ability to function under high temperatures and mechanical stress. They can be strengthened by solid-solution hardening, work hardening, and precipitation hardening. They are divided into three groups such as iron-based, nickel-based, and cobalt-based alloys. Incoloy 800HT™ is a

Introduction Monel 400 is a Nickel-Copper alloy with high strength and excellent corrosion resistance in a range of acidic and alkaline environments and especially suitable for reducing conditions. It also has good ductility and thermal conductivity. Chemical Composition of Monel 400 The compositional range for Monel 400 is provided in the table below. Element Content Ni 63 % min Cu 28 – 34 % Fe 2.5 % max Mn 2 % max Typical Properties of Monel 400 Typical properties of Monel

Introduction Super alloys are also referred to as high performance alloys. They contain many elements in a variety of combinations so as to achieve the desired result. These alloys can function under very high temperatures and severe mechanical stress, and also where high surface stability is required. They have good creep and oxidation resistance. Strengthening of super alloys is performed by solid-solution hardening, work hardening, and precipitation hardening methods. The

Introduction Inconel 600 is a Nickel-Chromium alloy with good resistance to oxidation and corrosion at high temperatures. Chemical Composition of Inconel 600 The compositional range for Inconel 600 is provided in the table below. Element Content Nickel (Ni) 72 % min Chromium (Cr) 14 – 16 % Iron (Fe) 6 – 10 % Typical Properties of Inconel 600 Typical properties of Inconel 600 are covered in the following table. Property Metric Imperial Density 8.47 g/cm3 0.306 lb/in3 Melting

If you are planning to buy alloy 31 China from professional alloy 31, alloy 31 bar, alloy 31 pipe, alloy 31 sheet, alloy 31 fittings, alloy 31 flange manufacturers China and suppliers China, please feel free to contact Bozhong Group, equipped with productive factory, we are always at your service. Chemical Composition: Grade % Ni Cr Mo N Fe Alloy31 Min 30 26 6 0.15 Rest Max 32 28 7 0.2 C Mn Si S Cu P - - - 3 1 0.015 2 0.3 0.01 1.4 0.02 Physical Performance: Density 8.1g/cm3

A333 Alloy Steel Coil Plate Bar Pipe Fitting Flange Square Tube Round Bar Hollow Section Rod Bar Wire Sheet Production Description: 1. Steel Grade: 13MF4/Y12/A12/S10Mn15/10S20/G12110 2. Product Name: 13MF4/Y12/A12/S10Mn15/10S20/G12110 Forging Deformed Steel Pipe 3. Length: 5.8m-12m or as required 4. Outside diameter: 6mm-1800mm 5. Wall thickness: 1mm to 35mm Chemcial Composition: Grade C Si Mn P S 13MF4 0.10~0.16 0.10~0.40 0.80~1.10 ≤ 0.040 0.10~0.15 Mechanical properties

High quality S31803 Duplex stainless steel pipe fitting 1. Product description Product name High quality S31803 Duplex stainless steel pipe fitting Grade High quality S31803 Duplex stainless steel pipe fitting Standard BS, JIS, GB, DIN, ASTM, API, ASTM Surface polishing,annealing,bright annealing and acid pickling Wall Thickness 0.15-150mm Outer Diameter 4mm-2500mm Length AS PER CUSTOMER Usage Widely used in the areas such as Sanitary,food industry, Decoration,construction