Ultrasonic Transducer

Concave probe: the detection is more stable, the concave array design is better to match the detection components, and is widely used for CFRP corner detection. Advantages 1.Near-wall probes have shorter dead zones at both ends 2.Widely used in composite channel inspection 3.Can be used for C-scan detection of composites (delamination, debonding and porosity) 4.Automatic and manual scanning Applications 1.Composite plate inspection 2.Immersion scanning area coverage 3.Plates,

Concave probe: the detection is more stable, the concave array design is better to match the detection components, and is widely used for CFRP corner detection. Advantages 1.Near-wall probes have shorter dead zones at both ends 2.Widely used in composite channel inspection 3.Can be used for C-scan detection of composites (delamination, debonding and porosity) 4.Automatic and manual scanning Applications 1.Composite plate inspection 2.Immersion scanning area coverage 3.Plates,

Concave probe: the detection is more stable, the concave array design is better to match the detection components, and is widely used for CFRP corner detection. Advantages 1.Near-wall probes have shorter dead zones at both ends 2.Widely used in composite channel inspection 3.Can be used for C-scan detection of composites (delamination, debonding and porosity) 4.Automatic and manual scanning Applications 1.Composite plate inspection 2.Immersion scanning area coverage 3.Plates,

Corrosion Probes: Corrosion Probes detect wall thickness reduction caused by corrosion, erosion, etc., and can detect damage in the wall. Advantages 1.High compatibility, can be compatible with most phased array flaw detectors. 2.The combination of s19 and s20 can automatically detect the girth weld, which is suitable for manual or automatic inspection of pipeline welds. 3. S20 is internal focus probeto optimize the signal to noise ratio 4.Good beam energy in the detection of

Product Description Deep Penetrating Probes:Low frequency with strong sound penetration,suitable for detecting thick parts Advantages 1.High compatibility, can be compatible with most phased array flaw detectors. 2.Weld penetration deep penetration series. 3.Acoustically matched to Rexolite for most angle beam. Application 1.Thick plate material and weld 2.Forgings, noise or granular materials 3.Moderate constitution and large monitoring range Specification Probe Series Model

Dual 1.5D Probes: Provide off-the-shelf inspection capabilities to cover a wider range of inspections with a superior signal-to-noise ratio. Advantages 1.High compatibility, can be compatible with most phased array flaw detectors. 2.Use for wave S-scans, pitch-catch longitudinal inspection strategy for better inspection. 3.Combined with detection, high detection accuracy and the small defects are quantified. 4.Wide the detection range, good SNR. Applications 1.Railway: rails,

Flexible phased array probe: can be bent at will. It used water as the coupling medium, which can be very well coupled in detecting pipes, bars and other components. Advantages 1.Bent to fit the workpiece surface at axis direction 3-4mm thick,can be placed inside the pipe for inner inspection 2.Can be used for different diameter pipes Application 1.Pipeline and bar corrosion inspection 2.The workpiece can be measured and imaged 3.Other complex geometric artifacts Specificatio

Pipe-Inspection Probes: large size and measuring range, used to complete oil, gas, electricity and other related pipeline inspection. Advantages 1.High compatibility, can be compatible with most phased array flaw detectors. 2.The combination of s19 and s20 can automatically detect the girth weld, which is suitable for manual or automatic inspection of pipeline welds. 3. S20 is internal focus probe to optimize the signal to noise ratio 4.Good beam energy in the detection of

Equv.GE DA312 10Mhz UT probe/Ultrasonic transducer suitable for DMS GO ultrasonic thickness gauge Specifications Frequency (MHz) 10Mhz Diameter contact surface (mm) 7.5mm Measuring range (mm) 0.6-60 Connection 2xmicrodot Connection position Side Amount of crystals 2 Working temperature (°C) -20-70

Composite probs for testing of tubes and bars: Technical meaning of the part codes: TSC = immersion composite type W = soft matching layer z = focal distance in water (mm) B = extended bandwidth φ = beam aperture angle f = nominal frequency (Rectangular stainless steel housing, 1.3 m cable, SMB-plug) Housing dimensions Part code TSC Z/φ WB f 15.5 x 33 x 13 mm TSC 20/30 WB 4 37/29 x 34 x 13 mm TSC 40/30 WB 4 37 x 34.5 x 13 mm TSC 60/30 WB 4 50 x 36 x 13 mm TSC 85/30 WB 4 64 x

Product Description Deep Penetrating Probes:Low frequency with strong sound penetration,suitable for detecting thick parts Advantages 1.High compatibility, can be compatible with most phased array flaw detectors. 2.Weld penetration deep penetration series. 3.Acoustically matched to Rexolite for most angle beam. Application 1.Thick plate material and weld 2.Forgings, noise or granular materials 3.Moderate constitution and large monitoring range Probe Series Model Element Shape

2D Matrix Array Probe: 3D spatial focusing, could use for immersion detection Advantages 1.High compatibility, can be compatible with most phased array flaw detectors. 2.Suitable for soft and thick attenuating materials 3.Can be used for 3D imaging 4.Lightweight and flexible, easy to carry, easy to measure 5.High energy concentration and high signal to noise ratio 6.Widely used for glue testing Specification Probe Series Model Element Shape Freq (MHz) E-Nos Pitch (mm) Active

2D Matrix Array Probe: 3D spatial focusing, could use for immersion detection Advantages 1.High compatibility, can be compatible with most phased array flaw detectors. 2.Suitable for soft and thick attenuating materials 3.Can be used for 3D imaging 4.Lightweight and flexible, easy to carry, easy to measure 5.High energy concentration and high signal to noise ratio 6.Widely used for glue testing Specification Probe Series Model Element Shape Freq (MHz) E-Nos Pitch (mm) Active

Internal focus probe: It acts on the space-constrained area, improves the detection accuracy, and reduces the near-surface dead zone. It has a very important application in the detection of thin-walled small-diameter tubes. Advantages 1.High compatibility, can be compatible with most phased array flaw detectors. 2.Acoustically matches Rexolite 3.Standard fittings with an outer diameter in the range of 21 mm to 115 mm, limited space detection 4.Smaller in size , internal focus

Near-wall narrow-shell probe: small width ensures a easy near-surface resolution. Advantages 1.High compatibility, can be compatible with most phased array flaw detectors. 2.Near-wall probes have shorter dead zones at both ends 3.Widely used in composite channel inspection 4.Can be used for C-scan detection of composites (delamination, debonding and porosity) 5.Automatic and manual scanning Applications 1.Composite plate inspection 2.Immersion scanning area coverage 3.Plates,

Pipe-Inspection Probes: large size and measuring range, used to complete oil, gas, electricity and other related pipeline inspection. Advantages 1.High compatibility, can be compatible with most phased array flaw detectors. 2.The combination of s19 and s20 can automatically detect the girth weld, which is suitable for manual or automatic inspection of pipeline welds. 3. S20 is internal focus probe to optimize the signal to noise ratio 4.Good beam energy in the detection of

Small-footprint Probe: Smaller size probe with case dimension minimum to 0.31x0.31x0.91 inch, widely used in the aviation field, or some small parts. Advantages 1.High compatibility, can be compatible with most phased array flaw detection units. 2. High Performance: Good Pk-to-Pk Sensitivity and SNR, quick to detect and locate defects. 3.Smaller in Size: Easy to inspect in extremely small space. 4.Wide Application: Widely used in castings, forgings, pipes, tubes, and machined

Small-footprint Probe: Smaller size probe with case dimension minimum to 0.31x0.31x0.91 inch, widely used in the aviation field, or some small parts. Advantages 1.High compatibility, can be compatible with most phased array flaw detection units. 2. High Performance: Good Pk-to-Pk Sensitivity and SNR, quick to detect and locate defects. 3.Smaller in Size: Easy to inspect in extremely small space. 4.Wide Application: Widely used in castings, forgings, pipes, tubes, and machined

Carbon Steel Weld Probe: Specific Advantages 1.High compatibility, can be compatible with most phased array flaw detectors. 2.carbon steel weld series: 3.Thick weld inspection from 3 mm to 60 mm 4.Manual or automatic detection 5.Wide thickness measurement 6.Excellent signal to noise ratio 7.Moderate constitution and large monitoring range Applications 1.Thick plate material and weld 2.Forgings, noise or granular materials 3.Moderate constitution and large monitoring range

Immersion Probe: It can be used together with water wedges, or the test samples can be placed in water to complete the test. Advantages 1. Acoustic impedance matched to water, suitable for work piece inspection of geometrically complex shapes. 2. Designed to fit onto the wedge, easy to couple to a variety of surfaces with adjustable underwater sound paths. 3.Single linear scan can cover distances from 30 mm to 90 mm. 4.High accuracy , can work normally for 24 hours under one