Elevator Spare Parts

Full Plastic Elevator Balance Chain Elevator Spare Parts For Compensation Chain Description of SN-WFQS Plastic balance compensating chain Perfectly combine welded chain with PVC Good and stable performance Flexibility, small bending diameters, insulation, durability, aging-resistance, can work under a wide range of temperature Low noise, recommended for elevator speed over 1.75m/s and less than 3m/s Model number OD (mm) Weight(kg/m) OD (mm) Min bending Diameter(mm) Breaking

Elevator Spare Parts ERN 1387 2048 ID749144-59 Elevator Encoder OD Ф58 Elevator Encoder OD Ф58, Hollow outside-taper shaft, Mounting with Bulge Ring. Unique aging compensation for illuminant to enhance reliability. Suitable for closed-loop control of permanent magnet synchronous motor and elevator tractor . Rear outlet cable, small size, light weight, easy to mount. Specification Electrical Mecharical and Environmental Supply Voltage DC5V±5% Rotating speed ≤2000rpm Current

Geared Traction machine for Traction Elevator by Lift Spare Parts Manufacturers, Load 500-630 KG Elevator Geared Traction Machine / Lift Spare Parts High Speed 0.3 m/s Enough calculated factor of safety and reliable; High efficiency, energy saving; Seamless structural design with mini distortion; Roping Load(kg) Speed(m/s) Sheave Diam-Rope Diam x Groove No.-Groove Pitch (mm) Power(Kw) Ratio Hz Pole Speed(r/min) Current(A) 1:1 500 0.3 Ø385-Ø9x4-16 3 62:1 48 6 923 7.2 500 0.4 3

Ungalvanized Steel Wire Rope 6x19+IWR, 1570-1870MPa, 3-46mm, For Lifting & Dragging, High Breaking Load 1. Product Identification & Standards Product Name: Steel Wire Rope (ungalvanized and galvanized) Standard: GB/T 20118-2006 Construction: Strand (e.g., 6x19+FC, 6x19+IWS, 6x19+IWRC) Application: Lifting machine, fish net dragging, heat steel-moving machine. 2. Primary Specifications Nominal Diameter (mm): 3 to 46 Approximate Weight (kg/100m): Varies based on core type (NF,

Steel Wire Rope 6x7/6x9W, Galvanized Or Ungalvanized, FC/IWS Core, 1.8-36mm, 1570-1870 MPa Product Information & Standards Product Name: Steel wire rope (ungalvanized and galvanized) Standard: GB/T 20118-2006 Construction: Strand Application: For various kind of cable car, belt conveyer, cable way drawing and slope well winching. Mechanical Property Table Parameters Diameter (mm) Approximate Weight (kg/100m) NF (Natural Fiber Core) SF (Synthetic Fiber Core) IWR (Independent

Galvanized Steel Wire Rope 6×7+FC, 8mm, High Tensile Strength For Cable Cars And Belt Conveyors steel wire rope (ungalvanized and galvanized) for various kind of cable car, belt cinveyer,cable way drawing and slope well winching. 1. Product Name & Standard Product Name: Steel Wire Rope (Ungalvanized and Galvanized) Execution Standard: GB/T 20118-2006 2. Construction & Application Structure (Construction): Strand Application: For various kinds of cable car, belt conveyor,

Standard Passenger Elevator Series Traction Machines With DC110V,2*1.5A This series of main units is widely used in passenger elevators, sightseeing elevators, medical elevators, light-duty freight elevators, and machine-room passenger elevator configurations. Product Parameters Supply voltage AC380V Traction ratio 2:1 Protection grade IP41 Elevator speed 1.O-1.75m/s Rated capacity 630kg~1000kg Brake DC110V,2*1.5A The maximum axial load 3000kg Duty type S5-40% FAQ 1. Are the

≤ DC110V Voltage 2-Leafs Side Opening Landing Door Device For Elevator Identification number: OCM02B(Fireproof Type),OCM02-EF(Fireproof Adiabatic Type) Features: ◎The door hanger has a safety hook to prevent collision and fall off, passed 45kg soft pendulum test, which conforms to GB/T7588.1/2 standard requirement ◎Door lock voltages ≤ AC230V,≤ DC110V ◎Common weight or common spring self-closing types are optional ◎Standard floor height ≥ HH+700, lowest floor height HH+550

2-Leafs Center Opening Permanent Magnet Asynchronous Door Operator OMJ11/12 System Identification number: OMJ-11XA /12XA (Car Top Installation),OMJ-11XB /12XB (Straight Beam Installation),OMJ-11X /12X(On Car Front-Wall Installation),OMJ-11X(Cataphoresis Material),OMJ-12X(Zinc-Plated Material) Features: With permanent magnet motor, wide torque range, high efficiency, environmental protection, energy saving The synchronous belt drive directly, no slip, no lubrication, running

Elevator 2-Leafs Center Opening VVVF Synchronous Door Operator For 700~1200MM Door Opening2-Leafs Center Opening VVVF Synchronous Door Operator OMJ-101 SystemIdentification number:OMJ-101A(Car Top Installation),OMJ-101B (Straight Beam Installation),OMJ-101C(On Car Front-Wall Installation)Features:◎The synchronous vane is equipped with door lock function, the door operator and landing door device 100% opened or closed synchronously◎The synchronous belt drive directly, no slip,

1800~3400MM Door Opening For Elevator 6-Leafs Center Opening Landing Door DeviceFeatures:◎The door hanger has a safety hook to prevent collision and fall off, passed 45kg soft pendulum test, which conforms to GB/T7588.1/2 standard requirement◎Door lock voltages ≤ AC230V,≤ DC110V◎Using common weight self-closing type. Common weight is located on each side of landing door device◎Standard floor height ≥ HH+700, lowest floor height HH+600◎Door lock qualified by the NATIONAL

AC 340–510 V Voltage Input Integrated Drive Controller For Elevator Parts AS390 Integrated Drive Controller for Elevators Rated output current: 9–23.6 A; voltage input: AC 340–510 V; frequency input: 50/60 Hz, with a deviation of ±5%. Technical Parameters Rated output current: 9–23.6 A Voltage input: AC 340–510 V Frequency input: 50/60 Hz, ±5% deviation Power factor > 0.98 THD < 4% Brake voltage: Two rated voltages—DC 220V and DC 110V. Operating humidity: 95%, no condensation

Machineroom Elevator Integrated Intelligent Elevator Control Cabinet 5.5/7.5/11/15/18.5/22 KW Integrated intelligent elevator control cabinet with an industrial-style appearance and an integrated modular design; Elevator Cloud—Elevator Cloud certification system ID enables component identification, safeguarding customers’ maintenance and service interests; Safety upgrade—electronic UCMP and arbitrary door-lock short-circuit detection significantly enhance elevator safety...

≤2.5 M/S Speed Contactless Intelligent Elevator Control Cabinet DC110V/3A Brake The SmartX1.0 contactless intelligent elevator control cabinet incorporates industry-leading technologies such as STO (Safe Torque Off), electronic star-delta switching, safe brake control, and integrated EMC solutions, addressing key points for users including noise, low-voltage electrical failures, large control cabinet size, and the need for external EMC components. Implementation Standard: TSG

High-Speed Elevator Control System Suitable For Full-Selection Elevators MCP-HS High-Speed Elevator Control System The MCP-HS high-speed elevator control system features a speed range of 3–10 m/s; it supports building heights of up to 64 floors. It is suitable for fully selective elevators, parallel elevators, conventional group-control elevators, and destination-based group-control elevators (capable of managing up to 8 elevators). High-speed Speed range: 3–10 m/s Floor

50Hz / 60Hz Frequency Elevator Energy Regeneration Device For Elevator Parts The AS.RG series energy feedback device automatically detects the DC bus voltage of the inverter and converts the DC voltage from the inverter’s DC link into an AC voltage that is synchronized in frequency and phase with the grid voltage. After passing through a filtering stage, this AC voltage is fed back into the local power grid, supplying power to equipment located in the vicinity of the local

300 Mm Free Height Elevator Oil Buffer Adopts A Solid Structural Design Product Overview The SN-LHB 100E oil buffer elevator safety component adopts a solid structural design and precise engineering manufacturing, ensuring long service life and low maintenance costs. In the event of an elevator losing control and sliding down or stopping suddenly, the SN-LHB 100E oil buffer safety mechanism activates instantly, achieving rapid deceleration through hydraulic oil flow damping

High-Speed, High-Efficiency Double-Support Integrated Elevator Traction Machine With Energy Efficiency Index Class 1ELEVATOR TRACTION MACHINESuspension:2:1Voltage:380VPole:20Rating:S5(50%)INS. Class:FIP Code:IP21Max.Static Load:14000KGWeight:1120KGPZD140B Brake:DC110V 2×0.89APZD140 Brake:DC110V 4×0.69ATypeLoad(kg)Speed(m/s)Sheave Dia.(mm)Rope Groove (mm)Double RopingCurrent (A)Torque (Nm)Rated Speed (rpm)Frequency (Hz)Power (kw)GTNH2-103P010003.0Φ56010xΦ13x18YES42.895520534

Galvanized Elevator Wire Rope – 8x19S, 10mm Dia, Bright Finish, High-Strength Steel, Flexible Hoist Cable for Passenger & Freight Lifts Product Overview Galvanized Elevator Wire Rope - 8x19S, 10mm Dia, Bright Finish, High-Strength Steel, Flexible Hoist Cable for Passenger & Freight Lifts Product Features Construction Characteristics: Adopts Ultra-High Molecular Weight Polymer Core (CGSF), pre-formed, bright (uncoated) surface, right-hand lay, ordinary (regular) lay.

Lift Tension Device Elevator Safety Components For Ø150/200/240mm Sheave Diameter Product Overview SN-LTD07 lift tension device elevator safety component is a high-performance safety device designed specifically for elevator systems. It ensures operational stability by monitoring and adjusting wire rope tension in real time. Key Features Core components include mounting frame, support frame, tensioning assembly, and spring compression assembly Utilizes spring elasticity for