Medical Device Testing Equipment

The medical suture diameter tester The medical suture diameter tester is designed and manufactured according to the provisions of absorbable surgical suture (yy1116-2010) and non absorbable surgical suture (yy0167-2005) on the measurement of suture diameter, which is a special equipment for testing the suture diameter. Nominal specification: 12-0 5 all medical sutures. Graduation of wire diameter measurement: 0.001mm. Presser foot diameter: 12.7 ± 0.02 mm; reference plane

Tube Gas Flow Tester Product introduction: It adopts 6 inch (320 * 240) touch screen and Chinese menu display. AD acquisition speed is 500KHz, internal code is 1 million; high precision clock chip, power-off storage; PLC control; overload alarm shutdown protection; nominal specification, printing, testing, time. The menu on the LCD screen is controlled by the keyboard to display the measured value and average value in real time, automatically judge whether it is qualified or

Medical acupuncture needle toughness tester Product introduction: The Chinese menu is displayed on a 5.7 inch (120 × 90) LCD screen Nominal specification: 0.1-0.8mm; Test frequency: 0.5Hz; Bending angle: 25 degrees, 45 degrees, 90 degrees three positions, the switch set bending angle, 4-bit high brightness LED display; Bending distance: 8-31.5mm, accuracy: ± 0.1mm (10 specifications); The number of experiments: two-way force was applied 20 times. Net weight: 10kg Overall

Toughness tester for blood collection needle tube (needle) Product introduction: Nominal specification: all blood collection needle, acupuncture needle body; Test frequency: 0.5Hz; Bending angle: 15 degrees, 20 degrees, 25 degrees (25 degrees, 45 degrees, 90 degrees) three positions, the switch set bending angle, 4-bit high brightness LED display; Bending distance: 8-55mm, accuracy: ± 0.1mm; The number of experiments: two-way force application 20 times and fatigue fracture

Rigidity tester of blood collection needle tube (needle) Product introduction: It adopts 5.7 inch (120 × 90) single color LCD touch screen and Chinese menu display. Nominal specification, pipe wall, span, set load, maximum deflection, print setting, test, up, down, time, calibration. The menu on LCD is controlled by keyboard, and test data is printed on board. Nominal specification: 0.2-3.4mm; Set load: 5.5 ~ 60N, accuracy: ± 0.1N; Loading rate: when loading to the set value,

Blood collection needle connection firmness tester Product introduction: It adopts 5.7 inch (120 × 90) single color LCD touch screen and Chinese menu display. Tensile test range: 0 ~ 50N, error no more than ± 0.1N, resolution 0.01N; Tension setting range: 2n ~ 50N, error not more than ± 0.1N; Test time: 1-99 minutes, arbitrary setting, the error is not more than ± 0.1s; Tensile loading degree: 0.2n/s ~ 0.5n/s. Net weight: 8kg Overall dimension: 400 × 290 × 240 (mm) It can

Product introduction: It adopts 5.7 inch (120 × 90) single color LCD touch screen and Chinese menu display. Nominal specification, test times, uplink, downlink, time, calibration. The menu on LCD is controlled by keyboard, and test data is printed on board. Real time display of steel needle penetration force, needle movement distance and force. Experimental load: 0 ~ 12n, accuracy: 0.1N, resolution: 0.01N Moving speed: 100 mm / min (according to GB 15811-2001); Printing mode:

Tester for fracture performance of medical suture needle Product introduction: It adopts 5.7 inch (120 × 90) single color LCD touch screen and Chinese menu display. Nominal specification, test load, print, test, uplink, downlink, time, calibration. The menu on LCD is controlled by keyboard, cutting force is loaded automatically, wire diameter data is recorded automatically, data report is output automatically, and test data is printed on board, which fully conforms to the

Cutting force tester for medical suture needle Product Description: Executive standard: designed and manufactured according to relevant provisions in yy0043-2005. It is specially used to test the cutting force of medical suture needle. Qg0166-a medical suture needle cutting force tester is composed of intelligent controller, force measuring mechanism, ranging mechanism, printer and so on. The intelligent controller is composed of CPU, motherboard, LCD, keyboard, power supply

Medical suture tension and suture connection force tester (two in one) Product Description: Xz1116-b medical suture tension tester is designed and manufactured according to yy1116-2002 "absorbable surgical suture" and other relevant standards. Its technical performance and indicators fully meet the relevant standards of the national pharmaceutical industry, and is specially used for the measurement of the tension of medical suture. The special tester is composed of intelligen

Product Description: The special tester for elasticity and toughness of medical suture needle is designed and manufactured according to gb4506-84 "test method for elasticity and toughness of medical suture needle", yy0166-2002 "suture needle with thread", yy0043-2005 "medical suture needle", gb2024-94 "medical acupuncture needle", etc. the technical performance and indicators fully meet the relevant national standards of pharmaceutical industry. It is spec

Product Description: The strength and puncture force tester for medical needle tip is designed and manufactured according to the relevant standards of gb4506-1984 "needle tip puncture force and strength test method", yy0166-2002 "suture needle with thread", yy0043-91 "medical suture needle", gb2024-94 "medical acupuncture needle", and its technical performance and indicators fully meet the relevant national standards of the pharmaceutical industry. It is s

Product Description: The instrument is composed of intelligent controller, force measuring mechanism, distance measuring mechanism and printer. The intelligent controller is composed of CPU, motherboard, LCD, keyboard, power supply and so on. The screen is displayed in all Chinese windows, and the keyboard controls the cursor for options, operation and setting. It can be operated according to the prompts without training. Product introduction: It adopts 5.7 inch (120 × 90)

Medical needle puncture force tester Product Description: The needle puncture force tester for medical injection needle is designed and manufactured according to the relevant provisions of gb15811-2016 (eqviso7864-1993) "disposable sterile hypodermic injection needle". It is specially used to test the puncture force of medical injection needle tip. Product introduction: Cl15811-e medical injection needle puncture force tester is composed of intelligent controller, force

Product description Gx9626-e medical syringe (needle) rigidity tester is designed and manufactured by the relevant provisions of GB 18457-2015, (eqviso9626-1991) "manufacturing stainless steel needle tubes for medical devices". It is specially used to test the rigidity of medical injection needle (tube). Product introduction: Gx9626-e medical syringe (needle) rigidity tester is composed of intelligent controller, force measuring mechanism, ranging mechanism and printer. The

Medical needle tube (needle) toughness tester Product Description: The medical needle tube (needle) toughness tester is designed and manufactured according to the relevant provisions of gb18457-2015, (eqviso9626-1991) "manufacturing medical stainless steel". It is specially used to test the toughness of medical needle. Product introduction: Rx9626-d medical needle (needle) toughness tester is composed of intelligent controller, positioning mechanism, swing mechanism, fixture

Bacterial filtration efficiency detector 1. Overview Bacterial filtration efficiency (BFE) detector is a special instrument to detect the ability of filter particulate matter from tested samples (such as masks) under specified conditions. This instrument mainly refers to Technical Requirements for Medical Surgical Mask in YY0469-2011, Appendix B < Bacterial Filtering Efficiency (BFE) Test Method B.1.1. Use the simultaneous sampling and comparison method to improve the

The mask Flame Retardant Tester meets the following standards: GB 19083-2010 technical requirements for masks; YY 0469-2011 mask. 1.3 composition and use of the instrument The structure of the instrument is shown in the figure below 1. Windbreak; 2. Combustion chamber; 3. Glass door; 4. Metal head mold; 5. Flame height rod; 6. Flame height measuring scale; 7. Set screw; 8. Igniter; 9. Residue container; 10. Resistance wire 11. Head mold set screw; 12. Thermocouple; 13.

Road condition fatigue test equipment for electric wheelchair A. Product Description: the instrument is made according to GB and ISO standards. It can carry out road fatigue test on wheelchair and visually check the damage degree of wheelchair. This machine is suitable for manual wheelchairs operated by users themselves and nurses as well as indoor and outdoor electric wheelchairs. Electric wheelchair is a wheelchair with three or more wheels installed on two parallel

Impact fatigue testing machine for medical bed 1, Medical bed falling impact fatigue testing machine Product Description: this testing machine is made according to the European Union standard. By imitating the impact of human body on the medical bed, nursing bed and children's bed, it can detect the damage resistance of the medical bed, children's bed and the vertical impact, so as to provide reliable design and comparison basis for improving the structure of the medical bed