Feed Testing Instrument

ST136pellet Particle Pulverization Rate Tester Is A Special Instrument For Testing PDI Value Of Pellet Feed ST136 pellet durability Index tester (pellet particle pulverization rate tester) is a special instrument for testing PDI value of pellet feed.The pellet pellet produced by the pellet factory must have enough durability to withstand the impact of the transportation process, reduce the fine powder, and meet the customer's appearance requirements for the pellet feed.

SH416 Automatic Engine Oil Boundary Pumping Temp Viscosity Standard: GB/T 9171 SH/T 0562 ASTM D3829 ASTM D4684 SH416 Fully Automatic Boundary Pumping Apparent Viscosity Meter is designed and manufactured in accordance with the national standard of the People's Republic of China, "GB/T 9171-1988 Determination of Boundary Pumping Temperature of Engine Oil" and SH/T 0562, while also meeting the petrochemical industry standards ASTM D3829 and ASTM D4684. It is an instrument used

SH412 Automatic cloud point test of nonionic surfactants Standard: ASTM D2024 GB/T 5559 SH412 automatic nonionic surfactant cloud point tester is according to the national standard GB/T5559-2010 "type epoxy ethane and epoxy ethane a block polymerization of epoxy propane type nonionic surfactant cloud point determination" and ASTM D2024 nonionic surfactant cloud point of the requirements of the standard test method for the design and manufacture of chemical products is

SH407 X-ray fluorescence sulfur analyzer Standard:GB/T 17040 GB/T 11140 GB/T 17606 ASTM D4294-02 SH407X Fluorescent X-ray Sulfur Analyzer employs the energy-dispersive principle and features a microcomputerized design integrating mechanical and electronic components, ensuring rapid and accurate analysis. Its repeatability and reproducibility comply with the national standards GB/T 17040-2008 "Determination of Sulfur Content in Petroleum Products (Energy Dispersive X-ray

SH412B Fully Automatic Cloud Point Tester Standard: GB/T 5559 ASTM D2024 Non-ionic surfactant Fully Automatic Cloud Point Tester 0 ～ 200°C Store 200 data entries ASTM D2024 The SH412B fully automatic turbidity point meter is designed and manufactured in accordance with the requirements specified in Method A of the national standard GB/T 5559-2010 "Determination of Turbidity Point for Ethylene Oxide Type and Ethylene Oxide-Propylene Oxide Block Copolymer Type Nonionic

SH406B Automatic crystal point tester Standard: GB/T 3145 GB/T 3069.2 GB/T 3710 GB/T 7533 GB/T 618 GB/T 1663 GB/T 13255.2 ASTM D852 ASTM D6875 ASTM D1493 SH406B fully automatic crystallization point analyzer is applicable to the GB/T 3145-2023 benzene crystallization point determination, GB/T 3069.2-2005 naphthalene crystallization point determination, GB/T 3710-2009 industrial phenol and phenol crystallization point determination, GB/T 7533-1993 organic chemical product

SH406A Semi-automatic crystal point tester SH406A Semi-automatic crystallization point tester is suitable for standard GB/T 3145-1982 benzene crystallization point determination, GB/T 3069.2-2005 naphthalene crystallization point determination, GB/T 3710-2009 industrial phenol, phenol crystallization point determination, GB/ T7333-1993-2005 organic chemical products crystallization point determination, GB/T618-2006 chemical reagent crystallization point determination.

ST-1700 Experimental mill ST-1700 experimental flour mill is a kind of precision laboratory flour mill, which is a special equipment for wheat flour milling in the laboratory. It contains a high-efficiency round screen screening system. The prepared flour is close to the large units in the milling room in terms of flour yield, ash content, flour quality and baking performance. It is used for experimental flour milling of wheat samples, quality analysis or baking experiments

ST-500 Food and Feed Calorimeter The ST-500 food and feed calorimeter is a multifunctional calorimeter developed using a single-chip microcomputer. It is mainly used for measuring the calorific value of solid and liquid combustibles such as coal, petroleum, food, wood, and other substances. This instrument uses a high-precision microcontroller calculation program to greatly improve measurement accuracy. It adopts a liquid crystal display, fully displays in Chinese, is easy to

ST-200A Standard electric inspection screen ST-200A standard electric inspection screen is a standard analytical screen that integrates powder particle grading and powder filtration; Suitable for precise analysis of particle size structure in laboratories and quality control rooms, as well as testing and analysis of solid content and impurities in liquids. It has the characteristics of low noise, high efficiency, and high accuracy. Standard sieve body ensures high accuracy in

ST-200 Standard Vibrating Screen ST-200 rapping and vibrating screen machine is mainly composed of base, screen and transmission mechanism. This rapping screen can be equipped with special clamps, which can be clamped Φ 200 test sieve, which can also be loaded Φ 75, Φ 100 sets of screens, easy and flexible clamping, reliable clamping, and automatic shutdown. working principle: The S-T200 series rapping screen motor drives the gear to change speed through the synchronous belt

ST136B Pellet durability tester ST136B pellet durability tester is a special instrument developed and produced by Shandong Shengtai Instrument Co., Ltd. and fertilizer manufacturers in combination with the phenomenon of fertilizer powdering in production and application .High moisture absorption rate, uneven particles, high moisture content and other reasons may lead to fertilizer powdering. ST136B pellet durability tester is used to simulate the crushing degree of granular

ST136 Pellet durability Index tester Standard: GB16765 ISO17831 DIN EN 15210-1:2010-04 The ST136 Particle Durability Tester (Particle Powdering Rate Tester) is designed and manufactured strictly in accordance with the GB16765 General Technical Conditions for Granular Feed and the ISO17831 standard for mechanical durability of solid biofuel particles and pellets. Simultaneously comply with DIN EN 15210-1:2010-04 The pellet feed produced by the feed factory must have sufficient

ST121A Abbes Refractometer The ST121A Abbe refractometer is an instrument capable of measuring the refractive index ND and the average dispersion NF-NC of transparent or semi-transparent liquids or solids. When equipped with a thermostatic device, it can determine the refractive index ND within a temperature range of 0°C to 70°C and measure the sugar concentration in a solution from 0% to 95% (corresponding to refractive indices of 1.333 to 1.531). Therefore, this type of

ST120K Particle hardness tester ST120K hardness strength tester mainly includes a dedicated software for the main unit, spare probes, and accessories. Its basic structure generally consists of a mechanical device capable of deforming the sample, a container for holding the sample, and a recording system for recording force, time, and deformation rate. The testing revolves around distance, time, and force for testing and result analysis. The physical property analyzer mainly

ST120B Automatic hardness tester The ST120B automatic particle hardness tester is suitable for use in various units such as feed, fertilizer, grain and oil, and feed companies, agricultural colleges and universities, and agricultural product quality inspection agencies, for automatically testing the particle hardness of grains and feed. Automatic Grain / Pellets Hardness Tester Automatic Grain and Feed Hardness Tester Structural characteristics: ● The particle hardness tester

ST116 Coarse Fiber tester tests The ST116 crude fiber tester is an instrument that utilizes the commonly used acid-base digestion method to digest samples and conducts weight measurement to determine the crude fiber content of the test sample. Using acids and alkalis with accurate concentrations, digest the sample under specific conditions, then remove soluble substances with ethanol, and after high-temperature ignition, deduct the amount of minerals. The remaining content is

ST-16A Texture Analyzer The ST-16A Texture Analyzer primarily consists of the standalone software dedicated to the texture analyzer main unit, spare probes, and accessories. Its basic structure generally comprises a mechanical device capable of inducing deformation in the sample, a container for holding the sample, and a recording system for capturing force, time, and deformation rate. Testing and result analysis are centered around distance, time, and force. The physical

Feed Testing Instrument ST120A Digital Particle Hardness Tester With High Precision, Repeatability, And Accuracy ST120A Digital particle hardness tester features 　Dedicated to the test of grain hardness, feed hardness, sugar cubes, pepper granules, candy hardness, fertilizer hardness, pomegranate granule hardness... Beautiful appearance, generous, with high test accuracy, accurate repeatability, instrument LCD display reading intuitiveness and other characteristics. 1. The

ST-06D Crude Fat Analyzer The ST-06D crude fat analyzer uses the Soxhlet extraction principle and weight measurement method to determine fat content. This crude fat analyzer is designed reasonably, with stable performance, high accuracy, easy operation, and time-saving. The measurement results meet the requirements of GB6433-2025 "Determination of Crude Fat in Feed" in China, and all indicators and performance meet the requirements of imported similar products. It is an ideal