Lubricating Oil And Grease Antifreeze Testing Instruments

SH0193C automatic rotating oxygen bomb instrument (metal bath) SH0193C automatic rotary oxygen bomb tester is designed and manufactured according to national standard astmd2272-2009 "determination of lubricating oil oxidation stability" metal bath standard. Suitable for evaluating the oxidation stability of new and in-service turbine oils of the same composition (base oils and additives). It can also be used to evaluate the new mineral insulating oil containing 2, 6- tert

SH269 Grease Worker according to GB/T269-91 "Grease and petroleum grease cone penetration determination" test standard requirements in the specified test conditions, after the change of mechanical shear work to judge the mechanical stability of grease, to extend the work cone penetration or shear stability, the unit is 0.1mm. Mechanical Grease Worker SH269 Mechanical Grease Worker (Double-Unit) Double Unit Mechanical Grease Worker Performance characteristics: 1 the use of

SH0325 grease oxidation stability tester is suitable for testing the corrosion resistance of grease according to SH/T0325, ASTMD942. The instrument USES digital temperature controller to control the temperature, which is stirred by the motor to make the bath reach constant temperature. Put the oxygen bomb connected with the pressure gauge into the constant temperature tank, through a certain pressure of oxygen, after a certain period of time, according to the pressure changes

SH116 grease anti-spray performance tester according to SH/T0109-92, ASTMD1264 "grease anti-spray performance measurement method" standard to determine the resistance of grease to water, for the specified experimental conditions, at 38℃ and 79℃ test to evaluate the grease resistance out of the bearing capacity of the new product. Lubricating Grease Water Resistance Tester Lubricant Water Washout Characteristics Analyzer Performance characteristics: 1, the water bath

SH128 automatic antifreeze freezing point tester/ jet fuel freezing point tester is based on the national petrochemical industry standard SH/T0090-91 "engine coolant freezing point determination method" and ASTM D1177. Suitable for measuring freezing point of engine coolant and concentrated liquid. Instrument features: embedded system design, using imported PT100 temperature sensor, automatic detection throughout the test; ASTM D2386, ASTM D1177 Engine Coolant Freezing Point

antifreeze corrosion meter Antifreeze corrosion tester Coolant corrosion meter ASTM D1384 SH0085 antifreeze corrosion meter is designed and manufactured according to the requirements of the SH/T0085 and ASTM D1384 standard of the petrochemical industry of the people's Republic of China, which is applicable to the determination method according to the SH/T0085 standard. To determine the corrosion degree of high boiling point and low boiling point engine coolant and its

SH103B automatic grease trace moisture tester conforms to the standard requirements of GB/T 7600, GB/T 6283, SH/T 0246, SH/T 0255 and other methods. The Karl-Fischer (Coulomb) method was used to determine the content of trace moisture in liquids with different properties. It has the advantages of high precision, fast speed, stable and reliable measurement data, etc. It is widely used in petroleum, chemical, electric power, environmental protection, medicine and other

SH120 automatic four ball machine grease wear resistance tester is in the form of sliding friction, under the condition of extremely high point contact pressure, mainly used to evaluate the bearing capacity of lubricants. In practical application, different evaluation indexes can be selected according to different uses of lubricants. automatic lubricant grease four ball wear testing machine The four-ball friction testing machine can also do lubricant long-term wear resistance

ASTM D892 Foam Tester For Measuring Foaming Tendency And Stabilityof Lubricating Oil Under The Standard Test Method SH126 lubricating oil foam tester conforms to GB/T12579,ASTMD892 method requirements. It is suitable for testing the foam tendency and foam stability of lubricating oil under the standard conditions .Foam Testing Equipment Electronic for Lubricating Oils ASTM D892 & GB/T12579 Bubble Tester The instrument adopts digital PID temperature automatic control system,

ASTM D93 Fully Automatic Closed Flash Point Tester For Petroleum Products SH105BS SH105BS The automatic closed mouth flash point tester adopts microcomputer technology and large screen LCD display. The instrument warms up according to the standard method, automatic lifting, automatic ignition, automatic display, automatic locking flash point value, automatic printing results. After the test, it can automatically cool down and realize the full automation of the working process

Potentiometric Titration Microcomputer Total Acid Number Tester For Acid Value Measuring Device ASTM D664 SH108C potentiometric titration automatic acid value meter is designed according to GB/T 7304-2000 petroleum products and lubricant acid value determination method (potentiometric titration method) equivalent ASTMD664 and GB/T 18609 original oil acid value determination (potentiometric titration method) and other standards. The instrument uses potentiometric titration

Automatic Micro Moisture Meter SH103A Water Content Of Petroleum Products Karl Fischer Coulometric Titration SH103A automatic trace moisture measuring instrument introduction High sensitivity, high precision, high reproducibility, Chinese menu and prompt, simple and intuitive operation, low power consumption and energy saving design, suitable for petroleum, chemical, electric power, pharmaceutical and other fields, can be tested sample type: solid, liquid, gas. instrument

SH129 grease drum stability instrument is applicable to standard ASTM D1831 SH/T0122, the operation of the instrument: with a certain amount of samples, at room temperature, after working on the drum test machine for 2h, determine the work of grease before and after the test coning degree. The instrument is suitable for measuring the consistency change of grease after working on the drum tester, and is used to judge the mechanical shearing stability of grease. ASTM D1831

ASTM D5800 DIN51581 Lubricating Oil Evaporation Loss Tester Vaporization Losses Analyzer Loss on Heating Equipment SH0059B liquid crystal color screen lubricating oil evaporation loss meter is developed and produced by our company according to the requirements of Chinese petrochemical industry standard SH/T 0059-1996 "Lubricating oil evaporation loss measurement method (Noak method)".ASTM D5800 DIN51581 It is suitable for lubricating oil and lubricating oil base oil to be

SH269 Mechanical Grease Worker Standard: GB/T269-91 ASTM D217 ISO2137 SH269 Grease Worker according to GB/T269-91 "Grease and petroleum grease cone penetration determination" test standard requirements in the specified test conditions, after the change of mechanical shear work to judge the mechanical stability of grease, to extend the work cone penetration or shear stability, the unit is 0.1mm. Performance characteristics: ● The use of motor drive reducer to achieve 60 times

SH0193C Automatic Rotating Oxygen Bomb Metal Bath Standard: ASTM D2272 SH/T 0193 ASTM D2272 dual holes metal bath auto rotaing bomb analyzer for gear oil RT ～ 200.0°C SH0193C automatic rotating oxygen bomb tester is designed and manufactured according to the national standard ASTM D2272-2009 "Lubricating oil oxidation stability determination method" metal bath standard. Suitable for assessing the oxidation stability of new and in-service turbine oils with the same composition

SH0175B Automatic distillate fuel oil oxidation stability instrument SH0175B automatic distillate fuel oil oxidation stability meter is designed and manufactured according to the requirements of the People's Republic of China industry standard SH/T 0175 "Distillate fuel oil oxidation stability determination method (acceleration method)" and ASTM D2274. It is suitable for the determination of intrinsic stability of intermediate distillate fuel oil by accelerated oxidation

SH129 Grease drum stability tester The SH129 Grease Roller Stability Tester complies with the standards ASTM D1831 and SH/T 0122 "Test Method for Roller Stability of Grease." When operating this instrument: a specified amount of test sample is subjected to a 2-hour test on the roller tester at room temperature, after which the working penetration of the grease is measured before and after the test. This instrument is suitable for determining the consistency changes of grease

SH128S Automatic Double-hole Freezing Point Tester Standard: SH/T 0090 ASTM D1177 GB/T 2430 This tester is designed in accordance with petrochemical industry standard SH/T0090-91(2000) Test Method for Freezing Point of Engine Coolant, ASTM D1177 and GB/T2430 Determination of Freezing Point of Aviation Fuels. It is used to test freezing point of engine coolant and its concentrate, as well as antifreeze, snow melting agent and other petrochemical & chemical products. Instrument

SH128C Automatic Jet Fuel Freezing Point TesterSH128C Automatic Jet Fuel Freezing Point Tester is designed and manufactured in accordance with GB/T 2430 Test Method for Freezing Point of Jet Fuel and ASTM D2386. It is suitable for determining the freezing point (i.e., crystal disappearance temperature) of jet fuel. Equipped with a heating device, a refrigeration device and an imported optical fiber sensor, the tester can automatically track experimental changes. It adopts an