Chemical Analysis Instruments

ST203CS Automatic medicine Freezing Point Determination Instrument Standard: USP 40,ChP 0613 ST203CS Automatic medicine Freezing Point Apparatus is designed and manufactured in accordance with USP 40 (United States Pharmacopeia 40th Edition) Chapter 651 "Freezing Point Determination" and the "General Rule 0613 Freezing Point Determination" from the Chinese Pharmacopoeia 2025. It is suitable for measuring the freezing point of pharmaceutical solutions, which is the temperature

ST203B Automatic congealing temperature tester Polyethylene glycol congealing temperature tester/Freezing point tester Glacial acetic acid congealing temperature tester/Freezing point tester Phenol congealing temperature tester/Freezing point tester Chlorophenol congealing temperature tester/Freezing point tester Stearic acid congealing temperature tester/Freezing point tester Magnesium stearate congealing temperature tester/Freezing point tester Dibutyl hydroxytoluene

ST120A Digital display particle hardness tester Characteristics ● Specially designed for testing the hardness of granular tablets and tablets, it has a beautiful and generous appearance, high testing accuracy, accurate repeatability, and strong intuitive reading of instrument LCD display. ● The optional software has the functions of quickly following the maximum value (only displaying the maximum value in one set of measurement data) and quickly following the minimum value

ST107 Adhesion tester Standard: ChP 0952 The adhesion tester is designed and manufactured strictly in accordance with the requirements of the new 2025 Chinese Pharmacopoeia "0952 Adhesion Force Determination Method", and is suitable for conducting adhesion testing on products such as ointments. Working principle Hang the test plate with the sample vertically on the test frame, hang a weight of the specified weight at the lower end, and measure the resistance of the adhesive

ST106 Initial adhesion tester ST106 initial adhesion tester, also known as the initial adhesion tester or tape adhesion tester, is designed and manufactured in accordance with the requirements of the new version of the 2025 Chinese Pharmacopoeia "0952 Adhesion Force Determination Method". The equipment adopts the inclined rolling ball method. When a small pressure occurs between the steel ball and the adhesive surface of the test sample, the adhesive tape, label, and other

ST104A Plaster softening point instrument Standard: ChP 2102 ST104A ointment softening point instrument is strictly designed and manufactured in accordance with the 2025 Chinese Pharmacopoeia 2102 ointment softening point determination method. This method is used to measure the temperature of the ointment when it is heated and softened under specified conditions, that is, to measure the temperature when the ointment drops by 25mm due to heating according to the following

ST102 Adhesive testing machine for ointment patches Standard: ChP 0952 ASTM D903 ‌ASTM D3330 ST102 ointment adhesive force testing machine is designed in strict accordance with the requirements of the new version of the 2025 Chinese Pharmacopoeia "0952 Adhesion Force Determination Method". It adopts modern mechanical design concepts and ergonomic design principles, and uses advanced microcomputer processing technology for careful and reasonable design. It is a new generation

ST-16A Gel strength tester Standard: QB/1996 QB1997 GB28304 QB2354 QB/T 1995 GB/T 36187 GB6783 GB13731 AOAC ST-16A gel strength tester can be used to test the gel strength values of minced meat, jelly, protein, gelatin, carrageenan, agar, agar, high absorbent resin, polymer hydrogel, butter, cream, fish balls, dairy products, polymer for oil field, or force values under preset conditions. The instrument is easy to operate, without complex training, one-click operation, curve

ST-016 Automatic fatty acid coagulation point tester Standard: SN/T 0801.17 ChP0731 ASTM D5565 Automatic fatty acid freezing point analyzer for animal fats and oils cold bath -20℃ ～ 100℃ ASTM D5565 ST-016 Automatic Fat and Fatty Acid coagulation Point tester is designed and manufactured according to the standard SN/T 0801.17 "Determination of coagulation Point of Imported and Exported Animal Fat and Fatty Acid" and the 2020 Chinese Pharmacopoeia 0713 Fat and Fatty Oil

SY7325 Lubrication grease evaporation loss tester Lube Oil/Grease Evaporation Loss Tester ASTM D972 Lube Oil Grease Evaporation Loss analyzer RT ～ 260℃ timing 100h ASTM D972 Lubricating Oils and Greases Evaporation Loss Tester ASTM D972 Lab Lube Oil Grease Evaporation Loss Test Apparatus ASTM D972 Lubricating Greases and Oils Evaporation Loss Testing Machine Standard: GB/T 7325 ASTM D972 SY7325 lubricating oil and grease evaporation loss tester is designed and manufactured

SY0336 Lubricating Grease Mechanical Impurity Content Analyzer Microscope Method Standard: SH/T 0336 SY0336 grease mechanical impurity tester is designed and manufactured in accordance with the national industry standard SH/T 0336-1994 "Determination of Impurity Content in Grease (Microscopic Method)", serving as an environmentally friendly and scientific detection method for measuring mechanical impurity content in grease. Technical Indicators: Objective Category Binocular

SY0326 Grease leakage tester ASTM D1263 Leakage Tendency Tester of Motor Vehicle Wheel Bearing Grease Grease Testing Equipment ASTM D1263 Grease Leakage Tendencies Tester SY0326 grease leakage measurement instrument is strictly designed and manufactured in accordance with the SH/T0326 standard. Lubricant Leakage Measurement: This instrument involves placing the test sample into a modified front wheel hub and axle assembly, allowing the hub and axle to operate together under

ST-F12 Natural accumulation density meterStandard: ASTM D6393 GB/T16913.3ST-F12 Dust Powder natural accumulation density meter is designed and manufactured in accordance with the technical requirements and relevant regulations of the natural accumulation method in Part 3 of GB/T 16913.3 Test Methods for Dust Physical Properties. It is mainly suitable for the determination of dust accumulation density.Working principle: When dust falls freely from the funnel mouth at a certain

ST302 Medication Optical Rotation Tester Standard: ChP 0621 USP EP 2.2.7 ST302 medication Optical Rotation Tester is designed and manufactured according to the new version of the 2025 Chinese Pharmacopoeia 0621 optical rotation measurement method. It is mainly a specialized instrument for measuring the optical rotation of medication. Unless otherwise specified, the 2025 Chinese Pharmacopoeia 0621 rotary photometry method uses the D-line (589.3nm) of sodium spectrum to measure

ST301 Medication Stability test chamber Standard: ChP FDA ICH ST301 medication Stability test chamber is used in the pharmaceutical industry for medication stability testing to determine the medication's shelf life and influencing factors. The biggest advantages of this series of products include ensuring stable and reliable testing results, precise temperature and humidity conditions, and an ultra long service life. The product meets the long-term, accelerated, and

ST213F Digital Vibration Density Meter Standard: GB/T 21354, GB/T 5162, ISO 3953, ASTM B527 Powder density refers to the mass of powder per unit volume. Due to the voids (or pores) between particles or within particles, the powder density is typically lower than the true density of the corresponding material. Based on testing methods, powder density can be classified into bulk density (also known as settled density) and tapped density. Bulk density is determined by filling a

ST-6 The vacuum sealing performance tester Standard: GB/T 15171 ASTM D3078 ST-6 The vacuum sealing performance tester is suitable for sealing test of products, through which the sealing process and sealing performance of flexible packaging can be compared and evaluated effectively. It is an ideal testing instrument for food, plastic soft packaging, wet wipes, pharmaceutical, daily chemical and other industries. Package Seal Integrity Testing / Package Leak Testers ASTM D 3078

SY7325A Lubricating grease wide temp evaporation loss tester Standard: GB/T 7325 SH/T 0661 ASTM D2595 SY7325A Lubricating Oil and Lubricating Grease Evaporation Loss Tester is designed and manufactured according to GB/T 7325 "Lubricating Oil and Lubricating Grease Evaporation Loss Determination Method", and the evaporation loss tester needs to meet SH/T 0661 "Lubricating Grease Wide Temperature Range Evaporation Loss Determination Method". Simultaneously conforming to ASTM

SY5018B Grease anti-corrosion performance tester Standard: GB/T 5018 ASTM D1743 SY5018B Grease anti-corrosion tester is designed and manufactured according to GB/T 5018-2008 and ASTM D1743 standard. It is suitable for testing the anti-corrosion performance of grease with tapered roller bearings coated with grease under wet conditions. SY5018B grease anti-corrosion tester is beautiful in appearance design, generous, reasonable in structure design, easy to operate and accurate

SY392 Grease pressure oil separator 4 work units calcium-based grease pressure oil separator Studio temp 15 ～ 25℃ GB/T 392 SY392 grease pressure oil separator is designed and manufactured according to the standard GB/T 392. This instrument is to use the pressure oil separator from the grease pressure out, and then determine the amount of oil pressure out. The required ambient temperature is 15 ~ 25℃. Four-digit device; operating ambient temperature: t = 15–25°C; weight: 1000