Petroleum Testing Instruments

ASTM D2024 nonionic surfactant cloud point of the requirements of the standard test method for the design and manufacture of chemical products is suitable for the determination of light color cloud point. SH412 automatic nonionic surfactant cloud point tester is according to the national standard GB/T5559-2010 "type epoxy ethane and epoxy ethane a block polymerization of epoxy propane type nonionic surfactant cloud point determination" ASTM D2024 nonionic surfactant cloud

SH9168B Automatic vacuum distillation tester SH9168B automatic vacuum distillation tester is a special test instrument designed and manufactured according to the standard GB/T 9168 and ASTM D-1160 of the People's Republic of China. It can partially or completely evaporate the boiling point range of petroleum products. This instrument is automatic decompression distillation measuring instrument, with heating device and refrigeration device, equipped with imported liquid level

SH11138 Industrial aromatics copper plate corrosion instrument SH11138 Industrial aromatics copper sheet corrosion tester is suitable for industrial aromatics, the polished copper sheet into the quantitative sample with condenser flask during operation, the flask into the specified constant temperature bath, 30min after taking out the copper sheet, with the corrosion standard color plate for comparison. Microcomputer temperature controller digital display, precision ±0.1℃

SH14454 Automatic flavor freezing point tester An overview of the SH14454 automatic flavor freezing point tester is GB/T14454.7-2008 (the determination of frozen point of spices). Instrument features: Adopting embedded system design and imported PT100 temperature sensor, automatic detection throughout the entire test process; Color touch screen; Can store test results; Can view historical data; Print results on the instrument, mechanical automatic stirring, double stirring:

SH21789 Automatic Abel closed flash point tester SH21789 Automatic Abel closed flash point tester is designed and manufactured according to the requirements of the national standard GB/21789 "Determination of flash point of petroleum products and other liquids (Abel closed cup method)" and ISO13736. A method suitable for determining petroleum products and other liquids with a flash point between -30 ℃ and 70 ℃. Instrument features: Adopting embedded system design and imported

SH0059B liquid crystal color screen lubricating oil evaporation loss meter is developed and produced by our company according to the requirements of Chinese petrochemical industry standard SH/T 0059-1996 "Lubricating oil evaporation loss measurement method (Noak method)".ASTM D5800 DIN51581 It is suitable for lubricating oil and lubricating oil base oil to be heated for 1h under certain conditions, and the evaporated oil is carried out by air. The evaporation loss of the

SD-2801A dry powder fire extinguishing agent penetration tester is designed and manufactured according to the requirements of "dry powder fire extinguishing agent" GB 4066-2017 and GA979-2012D dry powder fire extinguishing agent, but also suitable for road oil asphalt, modified asphalt and liquid oil asphalt or emulsified asphalt residual injection degree test. I. Main technical features 1, the use of digital display to display the taper value, intuitive and eye-grabbing. 2.

SH0048 Grease similar viscosimeter is used to determine the similar viscosity of grease according to SH/T0048-91 "similar viscosity of grease measurement method". Instrument equivalent Г О С Т 7163 standard for similar grease viscometry. ASTM D1092 Measuring Apparent Viscosity of Lubricating Greases Performance characteristics: Adopt spring pressure type capillary viscometer The height and direction of the instrument can be adjusted arbitrarily on the column Recording

SH102F microcomputer petroleum product density tester is designed and manufactured according to the requirements of the standard GB/T 1884 "Density determination of Petroleum and liquid petroleum Products (densitometry)" and SH/T2281 coking oil product density and ASTM D1298 DIN 51757. It is the liquid petroleum product density tester developed by our company. Suitable for measuring the density of crude oil and liquid petroleum products. Experimental Petroleum Products

SH017A Automatic Paraffin Penetrometer/Instrument is designed and manufactured in accordance with the requirements specified in the GB/T4985-2021 standard. It is a dedicated instrument for testing paraffin penetration, integrating mechanical, optoelectronic, and micro detection technology. The lifting arm automatically lifts, the touch screen fine adjusts the distance, automatically determines the results, and automatically prints. The standard test conditions are as follows:

SD11132 Liquid petroleum products hydrocarbon meter is in accordance with the law of the People's Republic of China standard GB/T 11132-2002 "hydrocarbon liquid petroleum products determination method (fluorescent indicator adsorption method)" the requirements stipulated in the design and manufacture, apply to approach, as stipulated in the standard GB/T 11132 main hydrocarbon in liquid petroleum products with fluorescent indicator displayed on the silica gel adsorption

SD7305 Lubricating Oil Water Separability Tester is designed and manufactured according to the requirements stipulated in the People's Republic of China standard GB/T7305 "Determination of demulsification performance of petroleum and synthetic liquids". ASTM D1401 This instrument is suitable for measuring oils with a kinematic viscosity of 28.8~90mm²/s at 40℃. The test temperature is 54±1℃. It can also be used to determine oils with a kinematic viscosity greater than 90mm²/s

SD5096 petroleum products copper corrosion tester is according to the standard of the People's Republic of China GB/T5096 equivalent ASTMD130 copper corrosion test method of the petroleum products the requirements stipulated in the design and manufacture, apply to specified by the standard test method, evaluation of aviation gasoline, aviation turbine fuel, motor gasoline, farm tractors, washing solvent, kerosene distillate fuel and lubricating oil and other petroleum

SD2801C constant temperature needle penetration meter is designed and manufactured according to the technical requirements and related regulations of GB/T269 "Determination of the cone penetration of grease and petroleum grease" and GB/T4509 standard of the People's Republic of China. It is mainly used for testing the needle penetration of asphalt and lubricating grease (or petroleum grease). The instrument can also be used for solid fine grain, powder, colloid, frozen

SD3536 semi-automatic open flash point meter is designed and manufactured in accordance with the requirements specified in the People's Republic of China standard GB/T3536-2008 "Petroleum Products - Determination of Flash Point and Ignition Point - Cleveland Open Cup Method". It is suitable for measuring the flash point and ignition point of petroleum products except fuel oil and open flash point not less than 79 ℃, and also supports the determination of GB/T1671-2008

SH112E low temperature petroleum kinematic viscometer conforms to the national standard GB/T265 "Petroleum product kinematic viscosity measurement method and dynamic viscosity calculation method" standard measurement requirements. Product model SH112E Product Name Low temperature petroleum kinematic viscometer Manufacturer Shandong Shengtai Instrument Co., Ltd Testing items It can measure the kinematic viscosity of light and heavy fuel oils, lubricants, additives, and

SH110 automatic apparent viscosity meter (CCS) conforms to GB/T6538-2010, ASTM D5293 and other technical specifications; Suitable for testing the low temperature dynamic viscosity index of engine oil. The instrument can measure the apparent viscosity of oil at temperatures ranging from -35℃ to -5℃ with an interval of 5℃.It has the advantages of accurate measurement, good repeatability, stable performance and simple operation. It is suitable for measuring the apparent

The SH113C fully automatic pour point tester meets the requirements of GB/T3535 national standard. ASTM D97 adopts a main control component composed of multiple microcontrollers, which automatically cools, maintains temperature, detects, and prints out the results automatically. Adopting a two-stage refrigeration system, the refrigeration range is from+30 ℃ to -70 ℃, suitable for detecting samples with pour/pour points higher than -35 ℃. The use of imported compressors

SD30011 Digital electric furnace carbon residue meter is designed and manufactured according to the requirements of the industry standard SH/TO170 "Carbon residue determination method (electric furnace method)" of the People's Republic of China. It is suitable for the determination of carbon residue of lubricating oil, heavy liquid fuel or other petroleum products according to the test method of SH/TO170 standard. Carbon Residue Tester (Digital Temperature Controlled Electric

SH109 automatic carbon residue tester is designed and manufactured in accordance with the standard requirements of GB/T 17144-1997 "Determination of carbon residue in petroleum products (micro method)", "ASTM D4530" and "ISO 10370:1993".It has the characteristics of beautiful appearance and convenient operation.The test results are consistent with those of GB/T268(Conrad's method), and it is also suitable for the detection of petroleum products with a carbon residue