Gauge Cutter Wireline

Ⅰ. Introduction A wireline brush is used to brush away the dirt, paraffin and filling rock waste on the tubing string and connectors before the downhole device is lowered in the well. Ⅱ. General Technical Parameters OD of body Fishing neck Connection Length PN 1.5＂ 1.375＂ 15/16UN 2ft W23-01.00 1.875＂ 1.75＂ 1-1/16UN 2ft W23-02.00 2.5＂ 2.313＂ 1-1/16UN 2ft W23-08.00 4＂ 2.313＂ 1-1/16UN 2ft W23-09.00 Note. More

1.5 Inch Guide Type Scraper Gauge Cutter WirelineI. Overview The guide type scraper is used to gauge the tubing and to remove the scale, paraffin wax and debris etc., as well as ensuring the unhindered passage of subsequent bottom bole assembly.This unique style of cutter has no hard edges and the protection cage helps in guiding the cutter as well as preventing damage to the cutting edge. Circulation can be achieved through the tool to remove debris during the operation.II.

Wireline Tubing Broach Gauge Cutter Wireline I. Overview: The conical scraper is a tool used to hang any natural obstruction cone in the well or to reshape the tubing with a small amount of deformation. The whole cone can hang up the obstruction of about 4mm. The Tubing Broach is used to remove burrs in the tubing left after perforating and broaching through the restrictions in the tubing. Tubing Broach is also used

1.25inch～6.625inch Wireline Tubing Swage Slickline Tools I.Overview The Tubing Swage is a tool used to shape the tubing reducing area to ensure the smooth passage of downhole equipment. Sometimes it can also be used to open the orange peel type dead plug at the end of the tubing. II.Structural features The Tubing Swage is such a structure, the upper part of the external thread (or quick joint male end) and fishing neck; The inner diameter of the waist and the deformed tubing

2.125 Inch The Wax Scraper Gauge Cutter Wireline I. Overview: The Wax scraper is a common tool for wax removal with wire working tools.The wax scraper gauge is a tool used for removing excess wax buildup from surfaces. It typically consists of a flat, rectangular or square-shaped piece of metal with a rough or abrasive surface, such as sandpaper or emery cloth. The wax scraper gauge is usually held firmly against the surface being cleaned and moved back and forth gently to

3 Inch Nickel Alloy Wireline Tubing Broach For Remove Rust Wireline Tubing Broach Gauge Cutter Wireline I. Overview: The conical scraper is a tool used to hang any natural obstruction cone in the well or to reshape the tubing with a small amount of deformation. The whole cone can hang up the obstruction of about 4mm. The Tubing Broach is used to remove burrs in the tubing left after perforating and broaching through the restrictions in the tubing. Tubing Broach is also used

1.875 Inch​ Gauge Cutter Wireline Material aluminum alloy I. Introduction A wireline gauge cutter is a wireline tool designed to gauge and scrape clean the wall of the tubing. The gauge cutter O.D. should be selected very close to the I.D. of the tubing in which it is run. It should be used prior to running or pulling a subsurface control. This assures the operator that the tubing is clear down to the point to which a sub surface device has to be run. The gauge cutter may