Resistive Heating Element

Add temperature control heating pipe Main purpose: heating pipe of water heater, made of red copper, working voltage 220V, power 1500W / 2000W, supporting customization according to drawings.

Electric heating pipe and flange heating pipe of water heater The voltage is 220V and 380V, which can be customized; Power 500-2000w, customizable, material stainless steel, heating tube diameter: 5-25mm, customizable. Welcome to provide customized drawings.

Electric heating pipe and flange heating pipe of water heater The voltage is 220V and 380V, which can be customized; Power 500-2000w, customizable, material stainless steel, heating tube diameter: 5-25mm, customizable. Welcome to provide customized drawings.

High Temperature Electric Furnace SiC Heating Elements Introduction H-shaped silicon heating element is manufactured by taking two carefully-matched SiC rods and welding a thickened silicon carbide bridge. This element provides for wiring both tail ends from one side of the furnace. The tail ends of the cold ends are metallized with aluminum, which can provide a low-resistance contact surface to the aluminum

1800c MoSi2 Heating Element Introduction Mosi heating element is a kind of resistance heating element basically made of pure molybdenum Disilicide. In oxidizing atmosphere, a layer of compact quartz protective film is formed on the surface of Mosi 2 element owing to the high temperature combustion, which prevents Mosi 2 from continuously oxidizing. In oxidizing atmosphere, its Max temperature can reach 1800 c and its applicable temperatur

Introduction MoSi2 heating element is a kind of resistance heating element made from Molybdenum Disilicide. It can be exerted under the high temperature of the oxidated atmosphere. MoSi2 heating element rod has the unique function of high temperature anti-oxidation. Under the oxidated atmosphere, the maximum temperature of MoSi2 elements is 1800°C. It can be made into various types,

Horizontally mounted MoSi2 Heating elements can be used for applications where the roof of the furnace is particularly low. Four-shank elements could be used where the surface temperature of the element does not exceed 1800℃ (3272℉) in such cases. And these types of elements are available in 3/6, 4/9, 6/12, 9/18 and 12/24 sizes. Advantages of multi-shank elements over two-shank ones: having longer hot zones; using

Type WU, Wide U shape Silicon Carbide Heating Element Introduction The Wide U (WU) shape element is a heating element that has two cold ends, welded at right angles to the opposite ends of the hot zone. The maximum recommended furnace temperature is 1425ºC (2600ºF). The element is manufactured of high density recrystallized silicon carbide. The two cold ends are low resistance silicon carbide. The diameters available

1450 ℃ silicon carbide electric heating element used in electrolytic aluminum industry The silicon carbide electric heating element is a non-metallic high temperature electric heating element. It belongs to a minority industry in the carbide category, but it is widely used and is a necessary equipment in smelting, casting, new energy, military and other related fields. With the rapid development of aluminum industry, SiC elements are widely used in aluminum industry equipment

1550 ℃ silicon carbide electric heating element, silicon carbide rod for industrial electric furnace Brief description of silicon carbide heating element: Silicon carbide rod (SiC) electric heating element is a rod-shaped non-metallic high-temperature electric heating element made of green high-purity hexagonal silicon carbide as the main raw material, processed into embryo, silicified at high temperature and recrystallized at 2200 ℃. The surface temperature of the rod can

Silicon Carbide Electric Heating Element, 1550℃ Silicon Carbide Rod For Industrial Electric Furnace Experimental electr Brief description of silicon carbide heating element: Silicon carbide rod (SiC) electric heating element is a rod-shaped non-metallic high-temperature electric heating element made of green high-purity hexagonal silicon carbide as the main raw material, processed into embryo, silicified at high temperature and recrystallized at 2200 ℃. The surface temperatur

Molybdenum disilicide components for 1300-1700 ℃ high temperature furnace​ Introduction of molybdenum disilicide electric heating element Molybdenum disilicide (MoSi2) is a silicon compound of molybdenum. Because the radii of the two atoms are not much different and the electronegativity is relatively close, it has properties similar to that of metals and ceramics. The melting point is as high as 2030 ℃, and it is conductive. Under high temperature, a silicon dioxide

Long-lasting Electric Heaters Silicon Carbide (SiC) Heating Elements for Furnaces of Optical Glass Industry Material: Good quality green SiC powders. Product: A kind of non-metal high temperature electric heating element. Production Process: Made into blank, silicided under high temperature and re-crystallized. Usage: Widely used in various high temperature laboratory furnace and other electric heating devices, such as in the industries of magnet, ceramics, power metallurgy,

24V SILICON NITRIDE MINI IGNITER RESISTIVE HEATING ELEMENT Silicon Nitride Mini Igniter - a reliable source of igniter Voltage Wattage Remarks 24 VAC 85 - 95 W up to 1200℃ within 3 to 5 seconds 20 VAC 60 - 85 W up to 1050℃ within 3 to 5 seconds 26 VAC 90- 120 W up to 1450℃ within 3 to 5 seconds Heating material: Silicon Nitride; Sheath: 304 stainless steel; Connecting wire: 400mm long mica insulated fiber glass coated wire Packaging & Shipping Packing: Plastic bag + Foam +

SiC Resistive Heating Element is a kind of non-metal high-temperature electric heating element.It is made of selected super quality green silicon carbide as main material. ED SiC Heater Parameters series Silicon carbide heating element model Non-standard custom Product features and features High temperature resistance, oxidation resistance, high density. Product specification Non-standard custom Whether to accept

Sic Rod Heating Element Feature: Excellent thermal shock resistance. High mechanical strength at high temperature. Excellent corrosion resistance against chemicals. Excellent corrosion resistance at high temperatures. Excellent thermal stability and distortion resistance at high temperature Following should be provided when ordering L Type or Bent 90° MoSi2 Heating Elements: Type: ED (Equal Diameter); OD: Outer