Nickel Chromium Alloys

Inconel 600(UNS N06600) Introduction Inconel 600 is a nonmagnetic, nickelbased high temperature alloy possessing an excellent combination of high strength, hot and cold workability, and resistance to ordinary form of corrosion.It is widely used in furnace components, chemical processing, food processing and nuclear engineering. Application: Chemical industry Aerospace Heat treating industry Pulp and paper industry

Nichrome Alloy Wire Introduction Nichrome (NiCr, nickel-chrome, chrome-nickel, etc) is the oldest form of resistance heating alloy. It’s one of the various alloys of nickel, chromium, and often iron or possibly other elements. Classification: Nichrome alloy, as resistance wire, as heating elements, can be classified as nichrome resistance heating wire, resistance heating flat and resistance heating strip according to the

Inconel 718(UNS N07718) Inconel 718 is a precipitation-harden able, nickel chromium alloy containing alsosignificant amounts of iron, niobium and molybdenum, along with lesser amounts of aluminum and titanium.It is widely used in gas turbines, rocket motors, space-craft, nuclear reactors, pumps and tooling. Application: Chemical processing Aerospace Liquid fuel rocket motor components Pollution-control equipment

Nichrome Alloy Wire Introduction Nickel Chromium alloys are medium to low resistance materials typically used in applications with maximum operating temperatures up to 1,200°C . Nickel Chromium wire has high resistivity, good surface oxidation resistance, high temperature level, and high strength at high temperatures, good processing performance and weldability. Can be widely used in metallurgy, household

Inconel 718 Bar Introduction Inconel 718 Inconel718 alloy is a precipitation hardening nickel-chromium iron alloy containing niobium and molybdenum. It has high strength,good toughness and corrosion resistance in high and low temperature environment under 650℃. The state can be solid solution treatment or precipitation hardening state. Inconel 718 Bar Application: ● steam turbine ● liquid rocket ● cryoengineering ●

Cr20Ni80 / X20H80 / Nikrothal 80 / Nichrome Heating Resistance Wire Ni80 Introduction heat resistance wire is a type of high resistance electrical wire. The wire resists the flow of electricity, and converts the electrical energy into heat. Nichrome, a non-magnetic alloy of nickel and chromium, is commonly used to make resistance wire because it has a high resistivity and resistance to oxidation at high temperatures. When used as a heating element, resistance wire is usually

NK Stable Resistance Nichrome Nicr8020 Nickel Chrome Heating Wire Introduction Shape: wire, ribbon, strip Good oxidation resistance and form stability Strong spooling from flange to flange Smooth surface without burrs or scratched EN 10204 3.1 Certificate Details Nichrome alloy includes pure nickel, NiCr alloy, Fe-Cr-Al alloy and copper nickel alloy. Nickel chrome alloys: Ni80Cr20, Ni70Cr30, Ni60Cr15, Ni35Cr20, Ni30Cr20, Cr25Ni20 FeCrAl alloy: 0Cr25Al5, 0Cr23Al5, 0Cr21Al4,

Austenite Cr30Ni70 Cr15Ni60 Nickel Chromium Alloys Wire Nichrome Alloy Wire Introduction Cr15Ni60 is an ideal material, it has good ductility,workability and weldability under high temperature and seismic strength. Nickel-chromium alloy with high and stable resistance, corrosion resistance, surface oxidation resistance, excellent coil-forming ability. Property: Not becoming brittle after long-term use and cooling down; Resistance to oxidation: Most metals oxidize quickly and

Inconel 718 Round Bar Feature 1. According to the preparation process can be divided into deformation superalloys, casting superalloys and powder metallurgy superalloys. 2. According to the strengthening mode, there are solid solution strengthening type, precipitation strengthening type, oxide dispersion strengthening type and fiber strengthening type, etc. Inconel 718 Round Bar Application: High temperature components,

Folding has the following properties ● processability ● it has high tensile strength, fatigue strength, creep strength and fracture strength at 700℃ ● high oxidation resistance at 1000℃ ● stable chemical properties at low temperatures ● good welding performance Application: Chemical processing Aerospace Liquid fuel rocket motor components Pollution-control equipment Nuclear reactors Cryogenic storage tanks Parameters Item

Inconel 625 Strip Introduction Inconel 625, a Nickel-Chromium-Molybdenum alloy with low Carbon and Niobium addition, has superior resistance to high temperature effects such as oxidation and carburization as well as to a wide range of corrosive environments of unusual severity, especially resistance to pitting and crevice corrosion. Typical applications for inconel 625 are seawater applications, aerospace components

Inconel 625 Coil Introduction Alloy 625 is face-centered cubic lattice structure. Dissolve out the carbon granule and instability quaternary phase, then change it to stability Ni3 (Nb,Ti) trimetric lattice around 650°C after a long time heat preservation. nickel-chromium content will strength the mechanical performance in the state solution while suppress the plasticity. Inconel 625 Coil Characteristic as below 1.

Introduction Nickel Chromium (NiCr 80/20) alloys are medium to low resistance materials typically used in applications with maximum operating temperatures up to 1,200°C . Nickel Chromium wire has high resistivity, good surface oxidation resistance, high temperature level, and high strength at high temperatures, good processing performance and weldability. Can be widely used in metallurgy, household appliances,

Inconel 718 Rod Introduction High temperature alloy has the high temperature hot corrosion and high temperature abrasion resistance,the metal material can work long-term which above 600 ℃ with under certain stress conditions. Inconel 718 Rod Application: High temperature components such as turbine blades, guide vanes, turbine disks, high pressure compressor disks,machine manufacturing and combustion chambers used in

Inconel 625 Corrosion resistance Alloy 625 own a very good corrosion resistance in many media, especially with excellent resistance to pitting, crevice corrosion, intercrystalline corrosion, and erode in oxide, also good resistance to inorganic acid corrosion, such as nitric acid, phosphoric acid, sulfuric acid and hydrochloric acid. Alloy 625 can resist the alkali and organic acid corrosion in the oxidation and reduction

Pure Nickel Nichrome Alloy Flat Wire Cr20Ni80 Resistant Heating Wire Introduction Plate/Sheet: 0.3~60.0mm(THK)*1220mm(WIDTH)*6000mm(LENGTH) Bar: Round:Φ5.5~250mm; Square:40~240mm*40~240mm Wire: Φ0.1mm~18mm Strip: 0.05~3.0mm(THK)*≤420mm(WIDTH) Seamless pipe: 6mm~219mm(OD)*0.5mm~18mm(WT) Welded tube: 1mm~120mm(OD)*0.1mm~10mm(WT) Inconel 625 UNS Trademark JIS W.Nr N06625 Inconel 625 NCF625 2.4856 Inconel 625 is a Nickel

Iron-Chromium-Aluminum Resistance Wire, OCr23Al5, OCr25Al5 Product introduction:FeCrAl Electrictrical Resistance Heating alloys with high electrical resistivity, temperature coefficient of resistance is small, high operating temperature. good corrosion resistance under high temperature, and particularly suitable for use in a gas containing sulfur and sulfides, low price. Size dimension range: Wire: 0.01-10mm Ribbon: 0.05*0.2-2.0*6.0mm Strip: 0.05*5.0-5.0*250mm Bar:10-50mm

Factory Direct Sell High Quality 99.9% 0.025mm Nickel Wire Product Description Factory Direct Sell 99.9% 0.025mm Nickel Wire NP1 Resistance heating wire and resistance heating strip in iron-chromium-aluminium (FeCrAl) alloys and nickel-chromium (NiCr) alloys for the manufacturing of electric heating elements. Resistance heating alloys based on iron-chromium-aluminium for maximum element temperature of 1425°C (2600 °F). resistance heating alloys are characterized by high

Nickel Chromium Alloys Nichrome electric resistance heating wire alloy used in furnaces Product Description The main chemical components of nickel-chromium wire are nickel and chromium, and the shape is filamentous, so it is called nickel-chromium wire. Nickel-chromium wire is also called nickel-chromium element wire. Features ①High strength at high temperature; ②The material will not become brittle after cooling down after long-term use; ③ The emissivity of fully oxidized

Nickel Chromium Alloys High temperature alloy forging Heating resistance nichrome rod Product Description Chromium alloy has high strength and corrosion resistance, and the alloy composed of iron and nickel is commonly known as stainless steel Features It has excellent corrosion resistance to various corrosive media in oxidation and reduction environments Excellent resistance to pitting and crevice corrosion, and will not produce stress corrosion cracking caused by chloride