Low PIM Termination

100 Watts 3.8GHZ 4GHZ 6GHZ DIN Male Low PIM -163dbc -165dbc RF Load Termination Part Number VN-LD-4G-100W-ODm-S-160 Operating Frequency ( GHz ) 0-4 Impedance ( Ohm ) 50 VSWR ≤1.30 (≤1.2 @ DC-3.8G) IM3 (dBc @ 2×43dBm) -160 Application Indoor & Outdoor Degree of Protection IP65 Operating Temperature ( ℃ ) -40 ~ + 80 Interface Din Male Handling Power (Watt, max) 100 Dimension (mm)(L×W×H, excl connector) 180X150X62 Net Weight (g) 1875 ± 20 Packing Dimensions (mm,L×W×H) 305 × 170

100 Watts 3.8GHZ 4GHZ 6GHZ DIN Female Low PIM -163dbc -165dbc RF Load Termination Dummy load/Low PIM Termination/Load is a device used to stop some port as a RF power load when testing other RF products or stop the RF power radiation when some port is not used at present , the theory is matching similar impedance to real device that will be connected to the RF System. Dummy load also will absorb some power and getting heating when RFA system works, so when use dummy load to

100 Watts 3.8GHZ 4GHZ 6GHZ 4.3-10 Male Low PIM -163dbc -165dbc RF Load Termination Dummy load/Low PIM Termination/Load is a device used to stop some port as a RF power load when testing other RF products or stop the RF power radiation when some port is not used at present , the theory is matching similar impedance to real device that will be connected to the RF System. Dummy load also will absorb some power and getting heating when RFA system works, so when use dummy load to

50 Watts 3.8GHZ 4GHZ 6GHZ N Male Low PIM -163dbc -165dbc RF Load Termination Dummy load/Low PIM Termination/Load is a device used to stop some port as a RF power load when testing other RF products or stop the RF power radiation when some port is not used at present , the theory is matching similar impedance to real device that will be connected to the RF System. Dummy load also will absorb some power and getting heating when RFA system works, so when use dummy load to stop

200 Watts 3.8GHZ 4GHZ 6GHZ 4.3-10 Female Low PIM -163dbc -165dbc RF Load Termination Part Number VN-LD-4G-200W-OPf-S-160 Operating Frequency ( GHz ) 0-4 Impedance ( Ohm ) 50 VSWR ≤1.30 (≤1.2 @ DC-3.8G) IM3 (dBc @ 2×43dBm) -160 Application Indoor & Outdoor Degree of Protection IP65 Operating Temperature ( ℃ ) -40 ~ + 80 Interface 4.3-10 Female Handling Power (Watt, max) 200 Dimension (mm)(L×W×H, excl connector) 180X150X62 Net Weight (g) 2330± 20 Packing Dimensions (mm,L×W×H)

200 Watts 3.8GHZ 4GHZ 6GHZ DIN Female Low PIM -163dbc -165dbc RF Load Termination Part Number VN-LD-4G-200W-ODf-S-160 Operating Frequency ( GHz ) 0-4 Impedance ( Ohm ) 50 VSWR ≤1.30 (≤1.2 @ DC-3.8G) IM3 (dBc @ 2×43dBm) -160 Application Indoor & Outdoor Degree of Protection IP65 Operating Temperature ( ℃ ) -40 ~ + 80 Interface Din Female Handling Power (Watt, max) 200 Dimension (mm)(L×W×H, excl connector) 180X150X62 Net Weight (g) 2380 ± 20 Packing Dimensions (mm,L×W×H) 305 ×

200 Watts 3.8GHZ 4GHZ 6GHZ 4.3-10 Male Low PIM -163dbc -165dbc RF Load Termination Dummy load/Low PIM Termination/Load is a device used to stop some port as a RF power load when testing other RF products or stop the RF power radiation when some port is not used at present , the theory is matching similar impedance to real device that will be connected to the RF System. Dummy load also will absorb some power and getting heating when RFA system works, so when use dummy load to

200 Watts 3.8GHZ 4GHZ 6GHZ N Male Low PIM -163dbc -165dbc RF Load Termination Dummy load/Low PIM Termination/Load is a device used to stop some port as a RF power load when testing other RF products or stop the RF power radiation when some port is not used at present , the theory is matching similar impedance to real device that will be connected to the RF System. Dummy load also will absorb some power and getting heating when RFA system works, so when use dummy load to stop

200 Watts 3.8GHZ 4GHZ 6GHZ N Female Low PIM -163dbc -165dbc RF Load Termination Dummy load/Low PIM Termination/Load is a device used to stop some port as a RF power load when testing other RF products or stop the RF power radiation when some port is not used at present , the theory is matching similar impedance to real device that will be connected to the RF System. Dummy load also will absorb some power and getting heating when RFA system works, so when use dummy load to

200 Watts 3.8GHZ 4GHZ 6GHZ DIN Male Low PIM -163dbc -165dbc RF Load Termination Dummy load/Low PIM Termination/Load is a device used to stop some port as a RF power load when testing other RF products or stop the RF power radiation when some port is not used at present , the theory is matching similar impedance to real device that will be connected to the RF System. Dummy load also will absorb some power and getting heating when RFA system works, so when use dummy load to

100 Watts 3.8GHZ 4GHZ 6GHZ N Male Low PIM -163dbc -165dbc RF Load Termination Dummy load/Low PIM Termination/Load is a device used to stop some port as a RF power load when testing other RF products or stop the RF power radiation when some port is not used at present , the theory is matching similar impedance to real device that will be connected to the RF System. Dummy load also will absorb some power and getting heating when RFA system works, so when use dummy load to stop

100 Watts 3.8GHZ 4GHZ 6GHZ 4.3-10 Female Low PIM -163dbc -165dbc RF Load Termination Dummy load/Low PIM Termination/Load is a device used to stop some port as a RF power load when testing other RF products or stop the RF power radiation when some port is not used at present , the theory is matching similar impedance to real device that will be connected to the RF System. Dummy load also will absorb some power and getting heating when RFA system works, so when use dummy load

100 Watts 3.8GHZ 4GHZ 6GHZ N Female Low PIM -163dbc -165dbc RF Load Termination Dummy load/Low PIM Termination/Load is a device used to stop some port as a RF power load when testing other RF products or stop the RF power radiation when some port is not used at present , the theory is matching similar impedance to real device that will be connected to the RF System. Dummy load also will absorb some power and getting heating when RFA system works, so when use dummy load to

50 Watts 3.8GHZ 4GHZ 6GHZ 4.3-10 Female Low PIM -163dbc -165dbc RF Load Termination Dummy load/Low PIM Termination/Load is a device used to stop some port as a RF power load when testing other RF products or stop the RF power radiation when some port is not used at present , the theory is matching similar impedance to real device that will be connected to the RF System. Dummy load also will absorb some power and getting heating when RFA system works, so when use dummy load to

50 Watts 3.8GHZ 4GHZ 6GHZ 4.3-10 Male Low PIM -163dbc -165dbc RF Load Termination Dummy load/Low PIM Termination/Load is a device used to stop some port as a RF power load when testing other RF products or stop the RF power radiation when some port is not used at present , the theory is matching similar impedance to real device that will be connected to the RF System. Dummy load also will absorb some power and getting heating when RFA system works, so when use dummy load to

50 Watts 3.8GHZ 4GHZ 6GHZ N Female Low PIM -163dbc -165dbc RF Load Termination Dummy load/Low PIM Termination/Load is a device used to stop some port as a RF power load when testing other RF products or stop the RF power radiation when some port is not used at present , the theory is matching similar impedance to real device that will be connected to the RF System. Dummy load also will absorb some power and getting heating when RFA system works, so when use dummy load to stop

50 Watts 3.8GHZ 4GHZ 6GHZ DIN Female Low PIM -163dbc -165dbc RF Load Termination Dummy load/Low PIM Termination/Load is a device used to stop some port as a RF power load when testing other RF products or stop the RF power radiation when some port is not used at present , the theory is matching similar impedance to real device that will be connected to the RF System. Dummy load also will absorb some power and getting heating when RFA system works, so when use dummy load to

50 Watts 3.8GHZ 4GHZ 6GHZ DIN Male Low PIM -163dbc -165dbc RF Load Termination Dummy load/Low PIM Termination/Load is a device used to stop some port as a RF power load when testing other RF products or stop the RF power radiation when some port is not used at present , the theory is matching similar impedance to real device that will be connected to the RF System. Dummy load also will absorb some power and getting heating when RFA system works, so when use dummy load to stop

25 Watts N Male Low PIM -163dbc -165dbc RF Load Termination Dummy load/Low PIM Termination/Load is a device used to stop some port as a RF power load when testing other RF products or stop the RF power radiation when some port is not used at present , the theory is matching similar impedance to real device that will be connected to the RF System. Dummy load also will absorb some power and getting heating when RFA system works, so when use dummy load to stop some port in the

25 Watts DIN Male Low PIM -163dbc -165dbc RF Load Termination Dummy load/Low PIM Termination/Load is a device used to stop some port as a RF power load when testing other RF products or stop the RF power radiation when some port is not used at present , the theory is matching similar impedance to real device that will be connected to the RF System. Dummy load also will absorb some power and getting heating when RFA system works, so when use dummy load to stop some port in the