Autoclaved Aerated Concrete Production Line

Automatic Oiling Machine Description: It has automatic identification module box in place, fully automatic, no waste, no pollution, automatic trace uniform coverage, spray lining, energy conservation, environmental protection, spray volume can choose, from cancer-causing gases (waste oil contains a lot of strong carcinogens), to ensure that the operating personnel life safety, etc. Functions: In the preparation process of aerated brick, the ingredients should be evenly poured

Side rolling guide Application: The side rolling guide can move automatically when the side panel moves, Technical paramete: The length and the rolling guild quantity can be made base on process required. Driving rolling guide:Max size a. L: 1415 mm W: 400 mm h: 400mm b. Weight: 128.6 kg c. Cycloidal pin wheel speed reducer: XWD2-43-0.37 Motor power 0.37Kw Transmission ratio i=43 d. Convey wheel rotate speed: 34r/min Driven rolling : Max size a. L: 925mm W: 400mm H: 400mm b.

SANKON Building Materials Technology Co. LTD is a one stop solutions provider for autoclaved aerated concrete (AAC) production equipment including complete AAC production lines. We manufacture a wide range of building material machines, including block making machines, concrete panel machines, dry mortar machines, and more. Our main products include AAC block production line,ALC panel production line,ALC panel production installation of cinstruction equipment and their

SANKON Building Materials Technology Co. LTD is a one stop solutions provider for autoclaved aerated concrete (AAC) production equipment including complete AAC production lines. We manufacture a wide range of building material machines, including block making machines, concrete panel machines, dry mortar machines, and more. Our main products include AAC block production line,ALC panel production line,ALC panel production installation of cinstruction equipment and their

Descripion: The block mold is a vessel for pouring concrete blocks. The mold consists of the mold frame, side plate (base plate), and clamping arm. Optional Type: Model Length (mm) Width (mm) Height (mm) M1 4200 1200 600 M2 4800 1200 600 M2 5000 1200 600 M4 6000 1200 600 M5 6000 1500 600 Features: The mold frame is formed by structural steel and steel plate, leading to a durable structure and high rotational sensitivity. Both ends are equipped with an overturn shaft and

Belt Conveyor Product Description Application range of Belt Conveyor Belt conveyors can be widely used in coal, mining , metallurgical , ports and wharf, chemical, petroleum and mechanical industry, to transport various kinds of bulk materials and mass materials. Bulk material such as coal,lime stone,irono ore and clean coal,etc. Features: 1.Strong power, cost saving, noise reduction, environmental protection, safety and reliability; 2.Reducing resistance, improving accuracy,

Screw Conveyor Description: The screw conveyor is the raw material conveying equipment in the production of aerated concrete block, and is the necessary aerated concrete supporting equipment.It is used to transport lime powder and cement in the production of aerated concrete blocks, connecting raw material (cement, lime, gypsum) tanks and weighing containers in complete equipment.In the process of conveying materials spiral conveyors to materials for stirring, mixing, heating

SANKON Building Materials Technology Co. LTD is a one stop solutions provider for autoclaved aerated concrete (AAC) production equipment including complete AAC production lines. We manufacture a wide range of building material machines, including block making machines, concrete panel machines, dry mortar machines, and more. Our main products include AAC block production line,ALC panel production line,ALC panel production installation of cinstruction equipment and their

Pouring mixer Structure: The mixer is composed of helical gear reducer, channel steel frame, and paddle wheel, etc. Channel steel frame is made of 20# channel It is equipped with helical gear reducer. Paddle wheel is made of steel pipe, plate and mixer shaft. Application: The Six-cube Slurry Mixer (refer to the photo and drawing) is especially used to mix the lime, Steam Aerated concrete arenaceous powder, water completely to form slurry. Technical Parameter: 1.Max size L

SANKON Building Materials Technology Co. is a one stop solutions provider for autoclaved aerated concrete (AAC) production equipment including complete AAC production lines. We manufacture a wide range of building material machines, including block making machines, concrete panel machines, dry mortar machines, and more. Application: It is used for mixing aluminum powder. Technical parameter: 1. Max outside size Length:630mm Width:500mm Height:1142mm 2. Weight≈200kg 3. Motor

Vibration motor product introduction: Vibration motor is a new type of vibration motor developed by German and Italian technology introduced by our company. VB vibration motor has exquisite design, high efficiency, energy saving, environmental protection, safe and reliable operation, convenient installation and maintenance, simplified structure, reduced cost, making the shaker handle more materials.The excitation force can be easily adjusted within a certain range to meet

SANKON Building Materials Technology Co. LTD is a one stop solutions provider for autoclaved aerated concrete (AAC) production equipment including complete AAC production lines. We manufacture a wide range of building material machines, including block making machines, concrete panel machines, dry mortar machines, and more. Our main products include AAC block production line,ALC panel production line,ALC panel production installation of cinstruction equipment and their

Powder scale Definition: Scale equipments are consist of certain volume tank,scale components(sensor),data processing display, material discharging control valve and structure,scale accuracy 0.5-1.0%. Powder scale used for power type materials : lime.cement ,Mainly include tank,sensor ,display and valve etc. Slurry scale used for flyash/sand and water mixture slurry scale.Mainly include tank,sensor ,display and valve etc. Principle: When powder/slurry fallen down into scale

In AAC production line, after finished cutting,turn cakes 90° ,use waste moving device to move top and bottom wastes. Working principle At the bottom of cake will have one layer watse,cake should be putted on the overturn frame turning 900 Cake bottom cutting surface from horizontal poistion turn into horizontal position, under the action of gravity,automatic falling down,waste on the surface of cake be romoved. Overturn table all use hydraulic drive, Overturn oil cylinder

Recommended application: In AAC production line, mixer mainly for materials preparation. different specifications, different uses. 6m³ mixer used for slurry pool, sand/flyash slurry preparation, waste slurry under pouring mixer. 20m³ mixer used for slurry preparation besides ball mill, waste slurry pit besides cutting machine. 50m³ 60m³ 100m³ used for sand/flyash preparation. Specification: No Name Power(KW) Pool/Tank Size 1 6³Mixer 5.5 φ2000X2000 2 20³Mixer 11 φ3000X3290