High Density Polyethylene Film

70 Micron DS Red HDPE Release Liner​ Description: A release liner is a plastic release film which made of PE/PP/PET film as carrier, silicon coated on either one or two-sided releases options. The film is uniform coated and very smooth and clean without wrinkles/tears/granules/ bubbles/pinholes or other defects. This highly conformable product bonds well to most surfaces over a wide range of temperatures and release film is heavily used in consumer products worldwide.

60 Micron White Single Side Silicone Coated Release Film For Tapes​ Description: It is made of HDPE (High density polyethylene)and by successive procedure of co-extrusion blown process, silicone oil coating that enables to possess release effectiveness. Production Process: 1. Original Film Blowing: 2. Silicone Coated: Applications: ♦ Release film for self-adhesive waterproof membranes and other waterproof materials, adhesive tapes. ♦ For cables production, packaging materials

High Density Polyethylene Film For Waterproof Membranes ​​ Product Description: High Density Polyethylene Film made of HDPE granules are noted for their characteristic rustle and milky colouring and they are odourless. Unlike LDPE films, their structure is duller, their strength is higher, they are hazier, and they are not shrinkable. The thermal endurance of HDPE films is from −50 °C up to +110 °C. HDPE films are more chemically resistant, which is given by their structure.

polyethylene films polyethylene film hdpe film pe film Description: Polyethylene(PE), is the most simple macromolecular organic compound and the most widely used macromolecular material in the world today. Polyethylene films namely PE film, refers to the film produced with PE particles. PE film has moisture resistance and low moisture permeability. Polyethylene film (PE) can be used to produce low-density, medium density, high-density polyethylene, cross-linked polyethylene

Embossed Silicone Coated HDPE Release Film Description: HDPE release liner refers to the film with separative film on the surface. HDPE release film does not have viscidity or slight viscidity contact with specific material under the limited conditions. Normally in order to increase the release force of the film, it does corona treatment to the film and coated with silicone, to make it act out the light and stable release force to different organic pressure glue. According to

60 Micron Double Side Silicone Coated HDPE Release Liner Description: A release liner is a pleastic release film which made of PE/PP/PET film as carrier, silicon coated on either one or two-sided releases options. The film is uniform coated and very smooth and clean without wrinkles/tears/granules/bubbles/pinholes or other defects. This highly conformable product bonds well to most surfaces over a wide range of temperatures and release film is heavily used in consumer

Black Color Used As Base Material High Density Polyethylene Film ​​ Product Description: HDPE Films made of HDPE granules are noted for their characteristic rustle and milky colouring and they are odourless. By adding colour concentrates a lot of colour variants can be achieved and by means of additives films with the desired properties can be produced. Unlike LDPE films, their structure is duller, their strength is higher, they are hazier, and they are not shrinkable. The

Green Color 100 Micron High Density Polyethylene Film​​ Description: It is multi-layers laminated film with high strength property, made via three layers co-extrusion film blown process and special stretching technology. The inner crossed structure differs from traditional films with one layer or many layers, possesses both thermal stability and dimensional stability, good bidirectional tear resistance & high tensile strength, as well as high elongation at bi-direction.

Waterproofing Application High Density Polyethylene Film​​ Description: Films made of HDPE are noted for their characteristic rustle and milky colouring and they are odourless. By adding colour concentrates a lot of colour variants can be achieved and by means of additives films with the desired properties can be produced. Unlike LDPE films, their structure is duller, their strength is higher, they are hazier, and they are not shrinkable. The thermal endurance of HDPE films

150 Micron High Density Polyethylene Film For Waterproofing Application​​ Description: Properties of HDPE film: Films made of HDPE are noted for their characteristic rustle and milky colouring and they are odourless. By adding colour concentrates a lot of colour variants can be achieved and by means of additives films with the desired properties can be produced. Unlike LDPE films, their structure is duller, their strength is higher, they are hazier, and they are not

Single Side Silicone Coated HDPE Release Liner For Self-adhesive Products Description: HDPE release liner refers to the film with separative film on the surface. HDPE release film does not have viscidity or slight viscidity contact with specific material under the limited conditions. Normally in order to increase the release force of the film, it does corona treatment to the film and coated with silicone, to make it act out the light and stable release force to different

7 Micron HDPE Perforated Film Description: What's the HDPE Perforated Film? Perforated film also called thermofusible film, burn-off film, torchable polyethylene foil, thermofusible HMHDPE film and torch-able film. It is widely used as surface material for SBS Bitumen Waterproofing Membranes and APP Bitumen Waterproofing Membranes, it will be melt when torch construction. Phameter: NO. Item Unit Factory parameter Detection method 1 Appearance / Q/TPXP1-2015 2 Thickness mm 0

HDPE Release Film Liner Description: VEM V., a brand of Upass’s own was notified by China trademark Bureau in 2015. It is made of HDPE (High Density Polyethylene) and by successive procedure of co-extrusion blown process, silicone oil coating that enables to possess release effectiveness. Main features: Easy release Good temperature-resistance Cost effectiveness Performance index: Item Unit Factory parameter Thickness mm 0.035-0.06 Width mm 20-1100 Sleeve I.D. mm 76 Max.

HDPE NORMAL FILM PLAIN FILM For Waterproof Membranes Description: HDPE NORMAL FILM PLAIN FILM For Waterproof Membranes, it is original HDPE Film. It is made of 3 layers film bolwing, no strength, make the film is flat. It is the ideal material for surface of waterproof membranes. Phameter: Products Name HDPE film Spec. 0.15mm*970mm Detection Methed Q/TPXP 1-2013 Date 2020.9.23 NO. Item Factory Requirement Detection Value Detection 1 Appearance No bubbles, no stains, no damage

HDPE PLAIN FILM For Bitumen Waterproof Membranes Description: HDPE PLAIN FILM For Bitumen Waterproof Membranes, it is HDPE Film. It is made of 3 layers film bolwing, no strength, no silicon coated and no corona. It is original PE film, rolling directly after film blowing, the film is flat. It is the ideal material for surface of waterproof membranes. Phameter: Products Name HDPE Film Spec. 0.07mm*940mm Detection Methed Q/TPXP 1-2013 Date 2021.3.23 NO. Item Factory Requirement

Description: , it is HDPE Film. Made of 3 layers film bolwing, and rolling directly. The surface is plain and flat. It is the ideal material for surface of waterproof membranes. Phameter: Products Name HDPE film Spec. 0.15mm*970mm Detection Methed Q/TPXP 1-2013 Date 2020.9.23 NO. Item Factory Requirement Detection Value Detection 1 Appearance No bubbles, no

Printing Blue Color High Density Polyethylene Film​​ Description: High Density Polyethylene Film made of HDPE are noted for their characteristic rustle and milky colouring and they are odourless. By adding colour concentrates a lot of colour variants can be achieved and by means of additives films with the desired properties can be produced. Unlike LDPE films, their structure is duller, their strength is higher, they are hazier, and they are not shrinkable. The thermal

Surface Material Waterproof Application High Density Polyethylene Film Product Description: HDPE, the full name is High Density Polyethylene, the simplest polymer organic compound, the most widely used polymer material in the world. A three lays film blowing process, makes it every layers has its fuctional. The surface also can be coated with single or double-sided silicone, used as release liner. The products are widely used in waterproof, packaging, protective film, self

7 Mic Surface Film For Torchable SBS Waterproof Membranes Description: Surface film called Perforated Film or HDPE Film, also called thermofusible film, burn-off film, torchable polyethylene foil, thermofusible HMHDPE film and torch-able film. It is widely used as surface material for SBS Bitumen Waterproofing Membranes and APP Bitumen Waterproofing Membranes, it will be melt when torch construction. Phameter: NO. Item Unit Factory parameter Detection method 1 Appearance / Q

Printed Thermofusible Perforated HDPE Film Description: What's the HDPE Perforated Film? Perforated film also called thermofusible film, burn-off film, torchable polyethylene foil, thermofusible HMHDPE film and torch-able film. It is widely used as surface material for SBS Bitumen Waterproofing Membranes and APP Bitumen Waterproofing Membranes, it will be melt when torch construction. Properties of HDPE film: Films made of HDPE are noted for their characteristic rustle and