Spiral Vibration Dampers

FTL 1430 135 Anti Vibration Damper It using its anti-vibration part to produce antihunt action to the wind vibration, consuming the vibration energy that produced by the cable running under the action of laminar wind,to prevent the destruction of gold tool and fiber optic cable,which mainly used for ADSS cable. Spiral vibration damper is mainly used on the installation of ADSS.By utilizing its anti-vibration part to produce damping against wind vibration,its singificantly

PVC Spiral Vibration Damper When choosing the damper, two factors should be taken into consider, one is damper weight, the other is diameter of the cable. Considering all mainly factors of the OPGW fiber, such as Tensility, wind speed, landform…, and so on. Then make the decision of damper model. Choose of weight 10.2 Specification Model Dia. Range(mm) Length of gripping section (mm) Total Length(mm) Weight(kg) FTL 1170 130 8.30-11.70 250 1300 0.28 FTL 1430 135 11.71-14.30

4D Series Stockbridge Bolted Vibration Damper Our 4D series Stockbridge damper made of hot galvanized casting iron hammer, hot galvanized steel twisted wire, aluminum alloy clamp, stainless steel bolts. Is to eliminate or reduce the vibration when the fiber optic cable operate under the influence of kinds of factor, then protection of cables and fittings.Using a typical Harrow design, the basic principles : dynamic absorbing energy, frequency protection range from 6Hz to

UV Resistant Plastic Semicom Tie UV Resistant Top line ties / top ties are intended for use with covered conductors and vertically-mounted tie top insulators on crossarms or pole-top-mounted insulators. Line angles of up to 15°can be accommodated when used with any plastic covered conductor. Made of all new raw material, No recycling. UV resistance , good tensile strength , impact strength and flexural strength etc. Normal colour of insulator tie Grey or black (other colour

PVC plastic insulator top tie PVC plastic single side ties are intended for use with covered conductors and side-mounted tie top insulators on arm less construction.Line angles of up to 15°can be accommodated when used with any plastic covered conductors. PVC plastic single side ties Plastic insulator tie are also named distribution tie,insulator tie are suitable used for fixing insulated conductors and vertically-mounted tie top insulators on crossarms or pole-top-mounted in

Spiral Vibration Damper For Fiber Cables Spiral vibration dampers limit and reduce the impact caused to fragile outdoor electrical structures from the motion produced during harsh weather. They also help to increase their long-term resilience. Made from waterproof PVC, the spiral vibration damper is the ideal solution to ensure affordable and lasting protection for various outdoor telecommunications systems, and minimising the long-term damage to exposed wires and cables. Its

PVC Semicon Top Tie For Conductor Most are used for insulators, conductors .It will develop unbalanced and lift-off loads equivalent to, or in excess of, a hand tie over covered conductor. Application Advantage Weight Material Standard voltage to 15kV Mechanical: UV resistance, tensile strength, impact strength, flexural strength 0.6kgs pvc used with either ANSI compliant polymer or porcelain insulators. Application with voltage to 15kV , is intended for use with covered

ADSS Fiber cable Fitting of PVC Spiral Vibration Damper ADSS Fiber cable fittings of spiral vibration damper is Communication connectors like wires are made of very fragile materials. So, during harsh or unstable weather such as hot sun or snowy periods, fragile electrical structures or wires can stretch or contract which can shorten their lifespan. The spiral Vibration Damper is telecommunication device. But sometimes may require the help of a trained expert and not someone

4D Series Aluminum Vibration Damper 4D series Vibration Damper is a turning fork multi-resonant Vibration Damper founded by Stockblique, and is mainly used in the dispeling and dispersing of the impact energy on the cable caused by the breeze . 1,Specification: 11.1 Model Clamp Dia. Range(mm) Total L(mm) Clamp W(mm) Weight(kg) 4D-30-27.0 27.0-22.3 383 52 2.5 4D-30-23.4 23.4-19.5 4D-30-20.3 20.3-16.5 4D-30-18.0 18.0-15.0 383 52 2.5 4D-30-16.0 16.0-14.0 4D-30-14.0 14.0-12.2 4D

Optical Cable Fittings Stockbrige Vibration Damper Antivibration Hammer when cable suffers form aeolian vibration, the hammerhead of the vibration damper hanging on the cable may vibrate freely along with the movement of cable to make the steel stranded wires on anti- vibration damper rub each other,convert the vibration energy passed on to the anti- vibration damper to friction heat among steel standed wires and consume such heat energy,thereby effectively supperessing the