Outdoor Fiber Optic Cable

Product Description: Unitube Mining Falme-retardant Cable: The structure of MGTSV fiber cable is by inserting a 250μm fibers into a loose tube made of a high-modulusmaterial filled with a waterproof compound. The center of the MGTSV is a steel wire as a metal strength member. The loose tube (and the filling rope) is twisted around the center strength member to form a compact and round cable core. The MGTSV optical fiber cable use for coal mine with armored-steel tape and

Product Description: Unitube Mining Falme-retardant Cable: The fibers, 250μm,are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. The tube is wrapped with a layer of PSP longitudinally. Between the PSP and the loose tube water-blocking material is applied to keep the cable compact and watertight. Two parallel steel wires are placed at the two sides of the steel tape.The cable is completed with a flame

Product Description: GYFTZY63 (non-metallic strengthening member, loose tube stranded and filled, polyethylene sheathed outdoor optical fiber cable for communication) The structure of the optical cable is to sheath a single-mode or multi-mode optical fiber into a high-modules plastic filled with waterproof compound loose In the casing. The center of the cable core is a non-metallic reinforced core (FRP). For certain fiber optic cables, a layer of polyethylene (PE) is extruded

Product Description GYTZA type cable loose jacket layer stranding, key protection cable, full cross section water resistance structure, double coated aluminum strip longitudinal wrap, to ensure the radial moisture resistance of the cable, improve the resistance to side pressure of the cable, the center steel wire reinforcement core, the cable core filled with special oil paste double coated aluminum strip bonded to PE inner sheath, rolled steel strip bonded to flame retardant

Product Description The structure of GYFTY is to sheath 250μm fiber into a high modulus loose tube (PBT). The tubes are filled with a water resistance filling compound. A fiber reinforced polymer wire (FPR), sometimes sheathed with polyethylene (PE) for high fiber count cable, locates in the center of cable as a strength member. PBT tubes (and fillers) are stranded around the strength member into acompact and round shape. The gap between the tubes is filled with water

Product Description: GYDTA cables are constructed by placing single - or multi-mode fibers in loose tubes made of high-modulus plastic filled with water-blocking compounds. The center of the cable core is a metal reinforcement core. For some fiber optic cables with a number of cores, a layer of polyethylene should be squeezed outside the metal reinforcement core, and the loose sleeve (and filling rope) should be twisted around the center reinforcement core to form a compact

Product Description: GYDTA cables are constructed by placing single - or multi-mode fibers in loose tubes made of high-modulus plastic filled with water-blocking compounds. The center of the cable core is a metal reinforcement core. For some fiber optic cables with a number of cores, a layer of polyethylene should be squeezed outside the metal reinforcement core, and the loose sleeve (and filling rope) should be twisted around the center reinforcement core to form a compact

Product Description: The GYDTS cable is constructed by placing 4, 6, 8, and 12-core fiber bands in loose tubes made of high modulus material, which are filled with a waterproof compound. At the center of the cable core is a metal reinforcement core, and for some cables with a number of cores, a layer of polyethylene (PE) needs to be squeezed on the outside of the metal reinforcement core. The loose sleeve and the filling rope are twisted around the central reinforcing core to

Product Description: The structure of the GDTS photoelectric hybrid cable is that single mode or multi-mode fiber is packed into a loose tube made of a high-modulus polyester material, and the tube is filled with a waterproof compound. At the center of the cable core is a metal reinforcement core, and for some cables with a number of cores, a layer of polyethylene needs to be squeezed on the outside of the metal reinforcement core. A compact circular cable core is formed by

Product Description: The GDTA hybrid cable is constructed by packing single or multi-mode optical fibers into a loose tube made of a high-modulus polyester material and filling the tube with a waterproof compound. At the center of the cable core is a metal reinforcement core, and for some cables with a number of cores, a layer of polyethylene needs to be squeezed on the outside of the metal reinforcement core. A compact circular cable core is formed by stranding the loose

Product Description: The fibers , 250um, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistantfilling compound. The tube is wrapped with a layer of PSP longitudinally. Between the PSP and the loose tube water-blockingmaterial is applied to keep the cable compact and watertight. Two parallel steel wires are placed at the two sides of the steeltape. The cable is completed with a flame-retardant sheath. Characteristics: 1.

Product Description: The fibers,200/250um, either of single-mode or multimode type, are positioned in aloose tube made of a high modulus plastic. The tubes are filled with a water-resistantfilling compound. A layer of aramid yarn or high strength glass is applied around thecable core as additional strength member. Then, the cable is completed with a black (color HDPE sheath. ·JET cable is relatively soft, with a certain tension, indoor and outdoor universal. Overhead, through

Product Description: 1.The fibers, 250µm, are positioned in a loose tube made of a high modulus plastic. 2.The tubes are filled with a water-resistant filling compound. 3.Two parallel FRP strength member are placed at the two sides of jacket. 4.The cable is completed with a polyethylene (PE) sheath. Characteristics: 1. Good mechanical properties and temperature resistance. 2. High strength loose tube, hydrolysis resistant. 3. Special tube filling compounds ensure critical

Product Description: GYXTW53 is an outdoor communication cable with metal strength components, loose tube filled with adhesive construction, polyethylene laminated sheath longitudinally covered with corrugated steel tape armored polyethylene outer sheath 125μm of fibers placed in loose tubes made of high modulus plastic. The tube is filled with a waterproof filling compound. The pipe is covered lengthwise with PSP. A water-blocking material is used between the PSP and the

Product Description: The structures of GYTS and GYTA fiber optic cables are the same, except that one is an aluminum strip and the other is a steel strip. one hundred and twenty-five μ The optical fiber of m is located in a loose tube made of high modulus plastic. The pipe is filled with waterproof filling compound. Steel wire, sometimes covered with polyethylene (PE) sheath, is used for high fiber dimension cables as a metal strength component located at the center of the

Product Description: The center of the central tube type optical cable is a loose tube, and the outer part of the loose tube is longitudinally wrapped with plastic coated steel tape. Place two parallel steel wires on both sides of the steel strip to ensure tensile strength. The reinforcing components are located around the loose tube, and waterproof materials are filled between the PSP and the loose tube to ensure the compactness and waterproofing of the cable. ■ Central

Product Description GYFTS Outdoor Long Distance G652D Aerial Non-Metallic Strength Member FRP Armored Fiber Optic Cables The fiber, 250μm,are positioned in a loose tube made of a high modulus plastic. The tubes are filled with water-resistant filling compound. A FRP, sometimes sheathed with polyethylene(PE) for cable with high fiber count, located in the centre of core as a non-metallic strength member. Tubes(and fillers) are stranded around the strength member into a compact

Custom Outdoor Photoelectric Optical fibre cable Composite cable 8 core +2 x 1.0 power cable plus cable Application 1.Used in outdoor applications that require both optical fiber and copper wire elements for communication and power 2.Copper wire can power remote electronics used in fiber optic communications 3.Copper wire can also be used for low data rate data transmission 4.Deployable cables have been used in network and private broadcast applications around the world 5

Product Description: GYFTA [Non-metal reinforcement member, loose sheath layer twisted fill type, aluminum-polyethylene bondedsheath communication outdoor optical cable] ■ The structure of the optical cable is to insert single mode or multi-mode optical fiber into a high modulus plastic filled waterproof compound loose sleeve, the center of the cable core is a non-metal reinforcement, and for some core number of optical cables, the non-metal center reinforcement is extrudated

Product Description Outdoor flame retardant optical fiber cable LZSH outer sheath Application 1. aerial,overhead installation Cable Specification: Item Name:Outdoor flame retardant optical fiber cable Optical Mode:Singlemode/Multimode Fiber Diameters:G652, G655, 50/125μm, 62.5/125μm Total Fiber Count:2-288 Bend Radius(Static/Dynamic):10D/20D Working Life:More than 25 years Application:Aerial or duct,Local network,Local network,Long distance network communication. characterist