Rail Fasteners

Why Fish Plate on Railway Track Is So Called, Does it Have Any Relation with Fish Dishes? Rail fish plate, also called rail joint, is used to connect two steel rails together. Many people question why it is called fish plate, actually, it has no relation with fish dishes. The word ‘fish’ in fish plate derived from the French word ‘fiche’, which means a peg, ‘fiche’ is derived from the old French word ‘fichier’, it has the meaning fasten, therefore fish plate means a plate

Rail Joint Bar,Rail Fish Plate Rail Joints, other names are railway fish plate and splice bar, joint bar and angle bar. it is a metal joint bar functions by connecting the ends of two rails sectoins together with rail bolt. Rail fish plate can increase the continuity and steadiness for track sections when the train is passing through by largely reduce the impact of wheels to the jointing sections of the rail tracks. This rail connectiong component is a key part for railroad

Rail Clip Size: full rail clip dimension available Standard: E-type, SKL, KPO, NablaPR, Russia, fast, UIC, BS, JIS,etc. Surface: Natural, black oiled, red oiled or upon customers Packing: Woven Bag/Kegs and Pallet/wooden box or upon customers The rail elastic clips (also called rail clip, elastic rail clip )are used with railway sleeper to fasten rails on both sides. The rail clips are usually made of forged spring steel, which are manufactured by hot forging process. The

Rail Clip Rail clip, or called elastic rail clip, is used to fasten steel rails to the underlying tie plate. Through bending and distortion, rail clip can put pressure on the rail, which prevents longitudinal movement of the rail, either from changes in temperature or through vibration. In general, rail clips are made of forged spring steel produced by hot forging process. Because of the most uniform microstructure, the forged rail clips are considered to be better than other

Deenic Rail Fixing Clip The Deenik rail clip, also referred to as the Deenic Elastic Rail Tension Clamp, features a "D" shape for securely fixing rails to sleepers. GNEE Rail offers a wide range of elastic rail clips for wooden, steel, and concrete sleepers, including Fast Clips, E-Clips, E2009, E1809, E2005, E2055, E2003, SKL12, SKL14, Nabla Clips, and Fist Clips. Customization is available to meet your specific requirements-get in touch with us today! Deenic Rail Fixing

​ ​ 9216/08/40 Crane Rail Clamp Product Introduction 9216/08/40 rail clamp is a flexible rail fastener product used in the flexible fixing system of crane rails. The clamp overcomes the loosening of the clamp, reduces wheel pressure and wheel wheel problems existing in the traditional hard rail fixing system, and reduces noise. At the same time, it also has a self-locking function, which can reliably withstand the lateral force transmitted by the crane wheel. 9216/08/40 Crane

​ 9120/15/38 Crane Rail Clamp Product Introduction 9120/15/38 Clamp products are used in crane rail fixing systems. This clamp overcomes the loosening of the plate, reduced wheel pressure and wheel wheel problems in traditional hard rail fixing systems, while reducing noise. This clamp can reliably withstand the lateral force from the crane wheels. 9120/15/38 Crane Rail Clamp Product Specification Product Type Application Rubber Tongue Size Weight (Piece) Horizontal Distance

The 3120/17/38 clamp is a perforated, forged steel component designed to manage lateral track forces of up to 75kN (7.5 tons). Made from a combination of forged steel, specialized rubber, and a gasket, it is engineered for durability and efficiency. Its low-profile design ensures compatibility with horizontal crane setups. Product Type Application Rubber Tongue Size Weight (Piece) Horizontal Distance Crane Rail Clips 3120/17/38 With rubber pad Depth 14mm 0.676kg 17mm Crane

3116/13/16 Crane Rail Clamp Product Introduction 3116 is a high-quality perforated crane rail clamp made of forged steel. This clamp also has a self-locking function. The maximum horizontal lateral force of the rail can withstand 38KN (3.9 tons). This clamp is also very simple to install. It is fixed through the floor and the rail clamp with embedded bolts or M16 fixing bolts. Tighten the nuts and the installation is successful. After the installation is completed, it is

Elastic Deenik Rail Clips The Deenik rail clip, or Deenic Elastic Rail Tension Clamp, is a "D"-shaped clip used to fasten rails securely to sleepers. GNEE Rail is your trusted partner for elastic rail clips, including Fast Clips, E-Clips, E2009, E1809, E2005, E2055, E2003, SKL12, SKL14, Nabla Clips, and Fist Clips. We offer products for wooden, steel, and concrete sleepers, with full customization available-contact us for details! Deenic Rail Fixing Clips specification Model:

Product Introduction 7120/15/40 is a high-quality crane rail clamp made of forged steel. Compared with other types of rail clamps, this is a new design. It has a smaller minimum width of the steel plate than other types. In the crane rail system, it can save materials to a great extent. It is also a self-locking, vulcanized rubber tongue rail fixing. This clamp is made of Q235 or Q245 forged and formed, which is the same material as the steel plate and has very good welding

The 8119/15/40 rail clamp overcomes the looseness of the clamp, reduces wheel pressure and wheel locking in the traditional hard rail fixing system, and reduces noise. The rail clamp has a self-locking function. It can reliably withstand the lateral force transmitted by the crane wheel. The 8119/15/40 rail clamp can reliably withstand the lateral force generated during the operation of the crane. The fixing is narrow and flat, which can provide the most favorable installation

Specifications 60kg/m rail Product Introduction DTVI-2 iron pads and fasteners for urban rail. 1. This fastener is elastic and split, suitable for 60kg/m rail tunnels, U-shaped structures and ground pillow-type integral roadbed sections. 2. The clamping parts are DI spring strips ($18), divided into two types: middle and joint. The gauge pads are divided into middle and joint gauge pads, each with four numbers: 6, 8, 10, and 12. Numbers 6 and 12 are for adjusting the gauge; 3

Product Features 1. The base of the SWJK reduced rail clamp is welded to the upper flange plate of the steel crane beam by three-sided welding or two-sided side welding. It can ensure that the lateral force of the crane is smoothly and evenly transmitted to the crane beam, and avoid the defect of weakening the flange section caused by a large number of openings on the flange of the crane beam. Therefore, the cross-sectional strength and bearing capacity of the crane beam are

Each set of WJK-TG welded rail clamp includes: base, upper cover, adjustment plate, bolts, nuts, springs, flat washers. The base plate of the rail clamp is welded to the upper flange plate of the steel crane beam by three-sided welding or two-sided side welding, which can ensure that the horizontal force of the crane is smoothly transmitted to the crane beam, and avoid the defect of weakening the flange section caused by a large number of holes on the flange of the crane beam

9220/20/40 rail clamp overcomes the loosening of the plate, the reduction of wheel pressure and the wheel-knocking phenomenon existing in the traditional hard track fixing system, and reduces noise at the same time. 9220/20/40 rail clamp can reliably withstand the lateral force generated during the operation of the crane. The fixing is narrow and flat, which can provide the most favorable installation size and can be used for various cranes with or without guide wheels. It is

9216/08 rail clamp overcomes the loosening of the plate, reduced wheel pressure and wheel lock in the traditional hard track fixing system and also reduces noise. 9216/08 rail clamphas a self-locking function. It can reliably withstand the lateral force from the crane wheels. 9216/08 rail clamp can reliably withstand the lateral force generated during the operation of the crane. It is narrow and flat, which can provide the most favorable installation size and can be used for

What Are the Composite Railway Sleepers Composite railway sleepers, also known as synthetic railway sleepers, serve as essential structural materials within railway tracks. Composite railway sleepers are manufactured by reinforcing polyurethane foam resin with continuous glass fibers and additives through a foam extrusion process. They have features of high strength, lightweight properties akin to wood, and outstanding resistance to corrosion. Moreover, they are durable,

concrete railway sleepers weight The weight of concrete sleepers is influenced by various factors, including their size, shape, material density, and internal structural design. For example, the weight of standard concrete sleepers is usually between 40 and 50 kilograms. And specific types of sleepers, such as TZII prestressed concrete sleepers, can weigh up to 200 kg1. Therefore, the weight of concrete sleepers varies depending on the type and specifications. GNEE rail is a

60kg Cast In Railway Shoulders The 60kg Rail Cast Iron Insert GNEE rail manufactured is a kind of cast-in shoulder that designed for use with 60kg rails. We are a leading railway product manufacturer in China, producing a wide range of rail shoulders, including both cast-in and weld-on options. Additionally, we offer customization services to meet specific requirements. Feel free to contact us. Specification Product 60Kg Rail Railway shoulder Material Name QT400-15 Standard