Rail Fasteners

Products Description The anti-corrosion technology of railway spikes has been continuously innovated with the development of materials science. In the early days, hot-dip galvanizing was used for anti-corrosion treatment. By forming a zinc layer on the surface of the spike, air and moisture were isolated and the corrosion rate of the metal was slowed down. However, in harsh environments such as high humidity and strong salt spray, this traditional process is difficult to meet

R65 rail fishplate is used for joint the same rail or different rails, we can produce it as per your drawing and mechanical property. R65 rail fishplate is an accessory used to connect railway tracks, also known as a fishplate or rail joint plate. Here are some basic information about R65 rail fishplate: 1. Material: R65 rail fishplate is usually made of high-quality bon steel or alloy steel, which has high strength and hardness. 2. Dimensions: The standard dimensions of

Description An over-wide track gauge is the leading cause of derailments in industrial rail yards but our single & double ended gauge rods provide a solution. Locomotive and freight wheels can exert as much as 4000 lbs. of side pressure against the rails. If the ties are spongy, they can lose their spike-holding strength and allow the rails to be pushed over from the wheel-side force. A between-the-rails derailment requires crane-lifting to put the or engine back on

Rail anchor description A railroad anchor, also known as a rail anchor or tie plate, the anchor is placed on the outer side of the rail and driven into the tie, creating a secure connection, ensuring the safety and durability of railroad tracks. Different types of anchors may be used depending on the specific requirements of the track and the type of rail used in the railway structure. GNEE rail anchor is efully selected high-quality materials, ensuring corrosion

Description Railway sleeper coach screws, also called screw spikes or chair screws, are usually used to fix wooden railway sleepers with tie plates or rail chairs. Coach screws are designed with a square head at the top and a cylindrical shaft with external threads on the other end. The railway sleeper coach screw used by Kingrail Parts is bon steel with a tensile strength of 550-700 N/mm. Both the design and materials help wedge the coach screws easily and provide a solid

American Standard Fishplate Supplier-GNEE Standard(according to countries) Size AREMA standard (USA) 115RE, 119RE, 132/136RE, 141RE, 100-8, 122CB 115-119RE, 132-136RE American standard fishplate • Standard: according to AREMA2010 • Length: 6 hole 36 inch or 4hole 24inch with round or oval holes according to the customers of requirements • Material: medium bon steel or micro alloy steel • Holes of punching or drilling available. 133RE Arema standard Rail Joints • According

Products Description Track spikes are designed to maintain gauge between the running rails and also they are mean to secure the rail to the tie. Track spikes have various shapes serving for different functions. The materials for railroad spikes production can be bon or stainless steel based on the requirement, and the surface of the spikes can be plain, black, hot dipped galvanized, or sherardized, etc. Among the various railroad spikes, dog spikes and the screw spikes are

Products Description The model of 22kg light steel rail is usually expressed as "22kg/m", which means that the weight of each meter of rail is 22 kilograms. 22kg rail is widely used in the field of railway transportation, including national trunk railways, local railways, urban rail transit, etc. It has strong rying capacity and stable operation, and is an indispensable and important part of railway construction. 22kg rail has the characteristics of high strength, high

Rail Clip Size: full rail clip dimension available Standard: E-type, SKL, KPO, NablaPR, , fast, UIC, BS, JIS,etc. Surface: Natural, black oiled, red oiled or upon customers Packing: Woven Bag/Kegs and Pallet/wooden box or upon customers The rail elastic clips (also called rail clip, elastic rail clip )are used with railway sleeper to fasten rails on both sides. The rail clips are usually made of forged spring steel, which are manufactured by hot forging process. The

GOST 2R-65 is a standard for lining used in the assembly of R65 rail joints with joint bars. The standard specifies the requirements for the manufacturing, dimensions, and mechanical properties of the lining material. The lining material is typically made of high-quality bon steel or alloy steel and is designed to be installed between the rail ends and the joint bars to ensure a secure and stable joint. The lining helps to distribute the load evenly across the rail joint,

GOST 1P-65 is a standard for lining used in the assembly of P65 rail joints with fishplates. The standard specifies the requirements for the manufacturing, dimensions, and mechanical properties of the lining material. The lining material is typically made of high-quality bon steel or alloy steel and is designed to be installed between the rail ends and the fishplates to ensure a secure and stable joint. The lining helps to distribute the load evenly across the rail joint,

Products Description The inspection and maintenance of road spikes is an important part of ensuring the safe operation of railway tracks. In order to promptly detect damage and loosening of road spikes, it is necessary to inspect road spikes regularly. Inspection methods include manual visual inspection and the use of special inspection instruments. Manual visual inspection mainly observes whether there are cracks, deformation, rust, etc. on the appearance of the road spikes,

The type of 43kg steel rail is expressed in kilograms per meter of rail mass. 43kg bon heavy-duty steel rail refers to a rail mass of 43kg per meter length, and its material is bon steel. According to weight classification, steel rails can be divided into light rail and heavy rail. In China, rails weighing 50 kilograms or more per meter are usually referred to as heavy rails, while rails weighing 43 kilograms, although slightly less than 50 kilograms, are also

GNEE RAIL manufactures oval head track bolts to AREMA, ASTM A-183 specifications and customer specific drawings/specifications. Specifications: Product Name Oval Neck Track Bolts Also Named Round Head Machine Bolt Material bon Steel Standard DIN 5903-1 Property Class 4.6, 5.6 Diameter M10, M12, M16, M20, M22 Finish Plain, Black Oxide, Zinc Plated, Hot Dipped Galvanized, Oxidation, Dacromet, Phosphating, Cadmium Electroplate, Nickel Plated Head Type Round Head Head Details

171LB Crane Rail The 171LB Crane Rail is a type of rail specifically designed for crane applications. With a mass of 171 pounds per yard, it is well-suited for heavy-duty industrial use. GNEE 171LB Crane Rail is manufactured following AREMA and ASTM standards for standard bon applications, the 171LB Crane Rail is provided in standard rail lengths of 20, 40, and 60 feet. Additional lengths can be provided upon request. If you have specific inquiries or require customization

Products Description Railroad spike, also know as rail spike. Railroad spikes are designed to maintain gauge between the running rails and also they are mean to secure the steel rail to the railroad tie. Rail spikes have various shapes serving for different functions. The materials for railroad spikes production can be bon or stainless steel based on the requirement, and the surface of the spikes can be plain, black, hot dipped galvanized, or sherardized, etc. Among the

Track bolts are used in rail joints and other connecting parts with holes to fasten rail tracks to railroad sleepers. Our track bolts are made of hardened steel. GNEE RAIL can provide various types of track bolts. Our track bolts are forged and meet AREMA, ASTM, DIN, UIC, BS, n and other standards. Track shoe bolts Size M16 to M48, L=100 to 500mm Standard DIN529, ISO898-1 Material Q235, C35, C45, 35CrMo, 42CrMo Finish Oxide black, Zinc plated, Hot dip galvanized,

Product: Rail shoulders Material: bon steel, etc. Standard: UIC, AREMA, GB, DIN, JIS or BS, etc. Surface: Plain or as customer as requested Packaging: Pallet, or according to customers What is rail shoulder? Railway rail shoulder, also called rail iron shoulder, rail fastenings inserts, railroad shoulder insert, railway cast-in anchor. Rail shoulders are placed on concrete rail ties in railways to support and secure elastic rail clips. They help keep the rails in the right

GOST P50/P65 rail joint bar fishplate is used for joint the same rail or different rails, we can produce it as per your drawing and mechanical property. GOST P50/P65 rail joint bar fishplate are specific types of rail joint bars designed for use with n railway track systems that adhere to the GOST standards. These rail joint bars are commonly used in various railway track systems across and other countries that follow GOST standards. The GOST P50 rail joint bar

Rail Clips are the key fasteners of the rail system. How choose the right Rail clips is very important. According to the track installation foundation and usage environment, as well as the track rying equipment. Matching the appropriate model to ensure the use of high-quality steel materials can ensure the smooth operation of the track system for a long time. GNEE Rail has specialized in the R&D and production of rail clips for more than 20 years. A full range of rail