10G SFP+ Optical Transceiver

Product Features ●Supports up to 11.3Gb/s bit rates ●Duplex LC connector ●Hot pluggable SFP+ footprint ●850nm VCSEL transmitter, PIN photo-detector ●Up to 300m on 50/125um MMF(2000MHZ.KM) ●Low power consumption, < 1W ●Digital Diagnostic Monitor Interface ●Optical interface compliant to IEEE 802.3ae ●Electrical interface compliant to SFF-8431 ●Operating case temperature: Commerical:0~70°C Industrial:-40 to 85

Electrical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =--40 to 85 ℃,VCC = 3.13 to 3.47 V) Parameter Symbol Min. Typ Max. Unit Note Transmitter Differential data input swing VINPP 150 1200 mVpp 1 Transmit Disable Voltage VD VCC-0.8 Vcc V Transmit Enable Voltage VEN 0 0.8 Input differential impedance Rin 100 Ω Receiver Differential data output swing Vout,pp 350 700 mVpp 2 Output rise time and fall time Tr, Tf 28

OLSP551XL-CD40 is a third party transceiver designed for use with Edgecore 10G networking equipment. This SFP+ module supports data-rate of 10.3125Gbps (10GBASE-ER), providing 10-Gigabit connectivity for up to 40 km over single mode fiber cable. This SFP+ module is programmed and tested at the factory, to ensure it works with Edgecore 10G Ethernet Switches, Routers, and network card. Features ● LC Fiber

Olinkcom's Ubiquiti UF-SM40-10G Compatible OLSP551XL-CD40 is a 10G ER single-mode SFP+ transceiver using 1550nm wavelength and reaching up to 40km distance. The module can be used for Ubiquiti 10G network equipment, 10G Ethernet, SONET or SDH networks. Product Features • Electrical interface compliant to SFF-8431 • 10Gb/s serial optical interface compliant to 802.3ae 10GBASE-ER • Distance up to 40km •

The OLSP311XL-CD10 Extreme Compatible 10GBASE-LR Transceiver with a duplex LC female connector, is designed to operate with Extreme networking equipment.This 10GBase-LR transceiver is fully hot-pluggable, so you can install it without shutting down the network or rebooting your device. It supports data transfer rates up to 10 Gbps with 1310 nm wavelength signaling, and transmits across six miles (10

Olinkcom’s OLSP551XL-CD40 is a high performance and cost-effective SFP+ transceiver module supporting data-rate of 10.3125Gbps (10GBASE-ER) or 9.953Gbps (10GBASE-EW) over single mode optical fiber. This transceiver is programmed to be compatible with a wide range of Extreme network equipment such as 10 Gigabit Ethernet (10 GbE) Switches, Routers, Network Interface Cards (NICs) and Media Converters.

OLSP851XL-C(I)DS3 Extreme Compatible is a Duplex 10GBASE-SR/SW Ethernet 10G Ethernet / 8G FC SFP+ transceiver designed for long distance optical communications up to 300m with signaling rates up to 10Gbps. Olinkcom's 10Gbps Duplex optical transceivers have undergone rigorous qualification and certification testing to provide End-to-End Compatibility using switching equipment. All SFP+ s

This Extreme Networks compatible SFP+ ZR transceiver provides 10GBase-ZR throughput up to 80km over single-mode fiber (SMF) using a wavelength of 1550nm via an LC connector. It is guaranteed to be 100% compatible with the equivalent Extreme Networks equipment. This easy to install, hot swappable transceiver has been programmed, uniquely serialized and data-traffic and application tested to

Product description The Ubiquiti Compatible 10GBASE-ZR uses a Cold EML laser transmitter at 1550nm. Line rate of transceiver is 10.3125Gbps. This SFP+ module is programmed and tested at the factory, to ensure it works with Ubiquiti (UBNT) 10G Ethernet Switches, Routers, and other network equipment. Ubiquiti Compatible 10GBASE-ZR module specifications Optical connector dual LC power consumption < 1.5W

Product description The SFP-1080-ZR is a long haul single-mode 10G SFP+ optical module compatible with the 10GBase-ZR specifications. It uses a cooled EML laser transmitter at 1550nm and an APD photodiode. Line rate of transceiver is 10.3125Gbps. Tested and found compatible on various 10G Ethernet switches to make sure the performance. Features 1. Compliant with SFF-8431 and IEE802.3ae 2. Data rate