10G SFP+ Fiber Transceiver

Intel E10GSFPSR Compatible 10G SFP+ SR Optics Module (MMF, 850nm, 300m, LC, DDM) The Intel E10GSFPSR compatible optics is high performance and cost effective SFP+ SR transceiver. It supports data-rate of 10.3125Gbps (10GBASE-SR) or 9.953Gbps (10GBASE-SW) over multi-mode fiber cable. It is programmed to be compatible with a wide range of Intel Switches, Routers, Network Interface Cards (NICs) and Ethernet Media

ZyXEL SFP10G-SR Compatible 10GBASE-SR SFP+ 850nm 300m Transceiver The OLSP851XL-C(I)DS3 is a 10G SR multi-mode multi-rate SFP+ transceiver using 850nm wavelength and reaching up to 300m distance on 50/125um fiber. The module can be used for 10G Ethernet, SONET or SDH networks. Product Features 1. Optical interface compliant to IEEE 802.3ae 10GBASE-SR 2. Electrical interface compliant to SFF-8431 3. Hot Pluggable 4. 850nm VCSEL transmitter

Product Features ● Supports 11.3Gb/s bit rates ● Duplex LC connector ● Hot pluggable SFP+ footprint ● Uncooled 1310nm DFB transmitter, PIN photo-detector ● Applicable for 10km SMF connection ● Low power consumption, < 1W ● Digital Diagnostic Monitor Interface ● Optical interface compliant to IEEE 802.3ae 10GBASE-LR ● Electrical interface compliant to SFF-8431 ● Operating case temperature:

RoHS Compliant 10Gb/s SFP+ Bi-Directional Transceiver 1310nm/1310nm 3km Reach Product Features ● Supports 9.95 to 11.3Gb/s bit rates ● Simplex LC Connector ● Hot pluggable SFP+ footprint ● Uncooled 1310nm DFB transmitter, 1310nm PIN photo-detector ● Applicable for 3km SMF connection ● Low power consumption, < 1.3W ● Digital Diagnostic Monitor Interface ● Optical interface compliant to IEEE 802.3ae 10GBASE-LR ● Electrical interface compliant to SFF-8431 ● Operating case

SFP-10G-BX20D 10G BiDi SFP+ 1330nm-TX/1270nm-RX 20km Transceiver Module Product Descriptions Olinkphotonics’OLSB321XL-CD20 series single mode transceiver is small form factor pluggable module for optical data communications such as 10GBASE-LR/LW defined by IEEE 802.3ae. It is with the SFP+ 20-pin connector to allow hot plug capability. The OLSBxx1XL-CD20 module is designed for single mode fiber and operates at a nominal wavelength of 1270nm or 1330nm; The transmitter section

Generic 10G CWDM SFP+1470~1610nm 10km SMF Transceiver Module DOM LC Connector Product Features ● Supports 9.95 to 11.3Gb/s bit rates ● Duplex LC connector ● Hot pluggable SFP+ footprint ● Uncooled 1350nm~1610nm DFB transmitter, PIN photo-detector ● Applicable for 40km SMF connection ● Low power consumption, < 1.2W ● Digital Diagnostic Monitor Interface ● Optical interface compliant to IEEE 802.3ae

Alcatel Compatible SFP+ 10GBase-SR 850nm 300m MM transceiver The SFP+ 10GBase-SR is a 10G SR multi-mode multi-rate SFP+ transceiver using 850nm wavelength and reaching up to 300m distance on 50/125um fiber. They can be used for 10G Ethernet, SONET or SDH networks. Product Features The SR standard is used for short range fiber connections, mostly inbuilding, wherever multi-mode OM3 fiber is available. The

Juniper 100% Support 10G LR 1310nm 10km SFP+ Optical Transceiver Product Features ● Supports up to 11.3Gb/s bit rates ● Duplex LC connector ● Hot pluggable SFP+ footprint ● Uncooled 1310nm DFB transmitter, PIN photo-detector ● Applicable for 10km SMF connection ● Low power consumption, < 1W ● Digital Diagnostic Monitor Interface ● Optical interface compliant to IEEE 802.3ae 10GBASE-LR ● Electrical

Allied Telesis Compatible 10G Ethernet 1310nm 2km LC 10G SFP+ Optical Transceiver Product Features ● Supports up to 11.3Gb/s bit rates ● Duplex LC connector ● Hot pluggable SFP+ footprint ● 1310nm FP transmitter, PIN photo-detector ● Applicable for 2km SMF connection ● Low power consumption, < 1W ● Digital Diagnostic Monitor Interface ● Electrical interface compliant to SFF-8431 ● Operating case temperatur

10G SFP+ CWDM 1270-1330nm 10km Cisco compatible C-Band GE transceiver module CWDM-SFP10G-1330-10 Product Features ● Supports 9.95 to 11.3Gb/s bit rates ● Duplex LC connector ● Hot pluggable SFP+ footprint ● Uncooled 1270nm~1330nm DFB transmitter, PIN photo-detector ● Applicable for 10km SMF connection ● Low power consumption, < 1.2W ● Digital Diagnostic Monitor Interface ● Optical interface compliant to

Arista SFP-10G-ER Compatible 40km DOM LC SMF SFP+ Optical Transceiver Module Product Features● Supports 9.95 to 11.3Gb/s bit rates● Duplex LC connector● Hot pluggable SFP+ footprint● Uncooled 1310nm DFB transmitter, PIN photo-detector● Applicable for 40km SMF connection● Low power consumption, < 1.3W● Digital Diagnostic Monitor Interface● Optical interface compliant to IEEE 802.3ae 10GBASE-ER● Electrical

Cisco CWDM-SFP10G Compatible 10G CWDM SFP+ 1270~1610nm 10km Transceiver Product Features ● Supports 9.95 to 11.5Gb/s bit rates ● Duplex LC connector ● Hot pluggable SFP+ footprint ● Uncooled 1270nm~1610nm DFB transmitter, PIN photo-detector ● Applicable for 10km SMF connection ● Low power consumption, < 1W ● Digital Diagnostic Monitor Interface ● Optical interface compliant to IEEE 802.3ae 10GBASE-LR ● Electrical

10Gb/s SFP+ BIDI TX:1270nm/RX:1330nm 60km Optical Transceiver Module MSA compliant Olinkcom's OLSB231XL-CD60 is hot pluggable Small-Form-Factor SFP+ Bi-directional transceiver module, which is designed for long reach 10Gb/s duplex optical data communications application. The SFP+ BIDI module features a highly reliable 1270nm DFB transmitter and 1330nm APD photo-detector into single LC optical connector,

Cisco SFP-10G-BX40U-C Compatible BiDi SFP+ 1270nmTX/1330nmRX 40km Transceiver OLSB231XL-CD40 is Multi-Vendor MSA Compatible SFP+ (Small Form factor Pluggable) Transceiver, operating over Single Fiber Single-Mode Fiber (SMF) optical cable. This transceiver use top quality DFB Laser transmitter with operating at nominal wavelength 1270 nm. and 1330 nm. PIN Photodiode receiver. It support DDM/DOM

TP-Link TXM431-SR Compatible 10GBASE-SR SFP+ 850nm 300m Transceiver OLSP851XL-C(I)DS3 is designed to extend transfer distances based on 10Gbps Ethernet connectivity. It is a 10GBASE-SR high performance 850nm multi-mode SFP+ transceiver. It supports full duplex, 10G Ethernet connections up to 300m or 33m with 50/125µm or 62.5/125µm fiber cables respectively. Product Features • Up to 11.1Gbps Data Links • Up to 300m transmission on MMF • Power dissipation < 1W • VSCEL laser and

10G SFP+ Optical Transceiver Juniper Compatible 10GBASE-LR SFP+ 1310nm 10km DOM LC SMF Transceiver Module Product Descriptions Olinkcom's OLSP311XL-CD10 Enhanced Small Form Factor Pluggable SFP+ transceivers are designed for use in 10-Gigabit Ethernet links up to 10km over SingleMode fiber. They are compliant with SFF-8431,SFF-8432 and IEEE 802.3ae 10GBASE-LR/LW. The transceiver designs are optimized for

10G-LR SFP+ 1310nm 10km DOM LC SMF Brocade Compatible 10GBase Transceiver Product Descriptions The Olinkcom's OLSP311XL-CD10 modules give you a wide variety of Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications. Absolute Maximum Ratings Parameter Symbol Min. Max. Unit Note Supply Voltage Vcc -0.5 4.0 V Storage Temperature TS -40 85 °C

FS SFP10G-60.61 Compatible 10G DWDM SFP+ 1560.61nm 40km DOM LC SMF Transceiver Product Features ● Supports 9.95 to 11.3 Gb/s bit rates ● Duplex LC connector ● Hot pluggable SFP+ footprint ● Cooled EML transmitter and PIN-TIA receiver ● Applicable for 40km SMF connection ● Low power consumption, < 1.3W ● 100 GHz channel spacing ● Digital Diagnostic Monitor Interface ● Optical interface compliant to ITU-T 694

10GBASE-SR SFP+ 850nm 300m DOM LC MMF Transceiver Module Compatible Cisco SFP-10G-SR Product Descriptions This transceiver product is used in 10-Gigabit Ethernet over MultiMode fiber. They are compliant with SFF-8431,SFF-8432 and IEEE 802.3ae 10GBASE-SR/SW. The transceiver designs are optimized for high perform-ance and cost effective to supply customers the best solutions for telecommunication and datacom

Mellanox MFM1T02A-SR Compatible 10GBASE-SR SFP+ Transceiver (MMF, 850nm, 300m, LC, DOM) The Mellanox MFM1T02A-SR compatible transceiver provides a high performance and cost-effective solution for 10.3125Gbps (10GBASE-SR) or 9.953Gbps (10GBASE-SW) fiber connectivity over multi-mode optical cable. It is programmed to be suitable for use with Mellanox 10-Gigabit Ethernet Switches, Security gateway appliances and