Steel Platen

Melamine/Phenolic Film Overlaying Multi-Daylight Hot Press Platen Those heating platens are designed into double circulation in order to achieve the fast heating and final temperature uniformity.Perfect surface finishing needed as any defects or scratches on the surface will be printed onto the film surface,and on this issue we are the expert and any of our hot platens shall be free from any defects or scratches.We have the toughest quality control here and every production

Production name: Thermal oil Heating/cooling drilled platens for multi-daylights hot press platens for Single daylight/ Multi-Daylight Hydraulic Hot Press Specification with Thermal oil Heating Platens : Material S355JR Product Size 4' by 8' Inlets and outlets 1 inlet and 1 outlet Thickness Tolerance +/-0.5mm Deep hole diameter 28mm Heating by steam Deep hole drilling from both ends tolerance in the middle +/-1mm Heating temperature 180 c-degrees Temperature uniformity +/-2 c

Custom Made Three Layer Board Hot Press Platen Those heating platens due to the big thickness and weight are designed into several small circulations and big size deep hole diameter in order to achieve the fast heating and final temperature uniformity;welding quality have been specially paid attention and any bad weldings with bubbles will not acceptable as they will leak after very short using time.We have the toughest quality control here and every production step shall be

Production name: High Pressure Laminates multi daylights Heating Platens for decorative panels Specification: Material S355JR;ST52 Product Size 2000mmx4500mmx70mm Inlets and outlets 12 inlets and 12 outlets Thickness Tolerance +/-0.1mm Deep hole diameter 28mm Heating by steam;thermal oil Deep hole drilling from both ends tolerance in the middle +/-1mm Heating temperature 180 c-degrees Temperature uniformity +/-2 c-grees Working pressure 100 kg/cm2 Main Features: We can design

laminated veneer lumber (LVL) Heating Platens For Single Daylight / Multi Daylights /Continuous Hot Press LVL- laminated veneer lumber, is used in construction industry which need extreme high quality. Many wood veneers with same thickness shall be pressed into one board. LVL can be manufactured to any length in a continuous production press. Being a low-cost building material, LVL is an ideal replacement to solid wood and is often used in the form of boards, beams, joists

Production name: Steam Heating/cooling drilled platens for multi-daylights hot press platens for Single daylight/ Multi-Daylight Hydraulic Hot Press Specification with Steam Heating Platens : Material STEEL A36 Product Size 4' by 8' Inlets and outlets 1 inlet and 1 outlet Thickness Tolerance +/-0.5mm Deep hole diameter 28mm Heating by steam Deep hole drilling from both ends tolerance in the middle +/-1mm Heating temperature 180 c-degrees Temperature uniformity +/-2 c-grees