Hot Melt Adhesive Film For Textile Fabric

Thermoplastic PolyurethaneTPU Hot Melt Adhesive Film for Textile Fabric Model Number:HT02-08 Description: HT02-08 is thermoplastic material, suitable for a variety of materials, it can be heat plasticized adhesive repeated. textile, polyester, cotton, blended fabric, TPU, PVC, PC / ABS, and has good resilience, elasticity, heat resistance, cold resistance and water resistance.This adhesive product possesses excellent chemical additives resistant, and it can resist 24hour -20℃

Lower Melt Point PolyurethaneTPU Hot Melt Adhesive Film for Textile Fabric Model Number:HT08-90 Description: HT08-90 is a thermoplastic adhesive product , the raw material is ployester, the structure is polyurethane film + release paper,it is suitable for wide range of adherend. It can be repeatedly heated for bonding. This adhesive product possesses excellent washability and chemical additives resistant. Operate machine :iron,high-frequency machine,heat roller machine,flat

Product Description 2019hot selling PES Hot Melt Adhesive Film for spun bonded fabric A. Fetures: Acid and alkali resistance, excellent in water wash and dry wash, eco-friendly, cold resistance, antisepsis, low melting temperature, double sides adhesiveness, gloss surface, strong adhesiveness, short curing time, absolutely transparent. B. Applications: It was widely used in composite Textile, Non-Woven Fabrics, Leathers or other roll materials. As the hot melt adhesive film

Product Description Hot Melt Adhesive Film for Non-woven Fabric Complex A. Fetures: Acid and alkali resistance, excellent in water wash and dry wash, eco-friendly, cold resistance, antisepsis, low melting temperature, double sides adhesiveness, gloss surface, strong adhesiveness, short curing time, absolutely transparent. B. Applications: It was widely used in composite Textile,Non-woven Fabrics, Leathers or other roll materials. As the hot melt adhesive film has strong

PES Hot Melt Adhesive Film for Bonding Non-Woven Fabrics Composition: CO-Polyester + Release Paper Description: PES Hot melt Glue White Color Sheets is us through the high precision coating machine to coating the melting raw materials well-distributed into the release paper, and the thin film colors is milky white.It is usually used to bonding apperals and Chenille embroidery patch industies.This product is a thermoplastic film hot melt adhesive, entrusted to the release of

Resistance Dry Cleaning Polyamide Hot Melt Adheisve Film for Textile Fabric Lamination Model Number:HT05 Description: HT05 is environmental friendly thermoplastic material, suitable for a variety of materials, it can be heat plasticized adhesive repeated. This adhesive product possesses excellent chemical additives resistant, and resistance washing& dry cleaning. Structure: Polyamide film +Release Paper Operate machine :iron,high-frequency machine,heat roller machine,flat-bed

2019 hot selling PES Hot Melt Adhesive Film for adhesive-bonded fabric Product Description HT03 is a thermoplastic film, it is suitable for a variety of materials , it can stick to materials after one or more times melt by hot temperature,after hot melting and quickly cold speed feature make it use to various high speed production. It has excellent adhesion to textile,plastics(PET, PVC, PC etc),metals(iron,aluminium,copper etc),paper and so on.This product is resistant 60℃

30g/㎡ Ultrathin High Viscosity Low Tempareture Hot Melt Adhesive Film For Carbon Fiber Fabrics Lamination Model Number:HT07-60L Description: HT07-60L is thermoplastic material, suitable for a variety of materials, it can be heat plasticized adhesive repeated. textile, polyester, cotton, blended fabric, carbon fiber fabrics,TPU, PVC, PC / ABS, and has good resilience, elasticity, heat resistance, cold resistance and water resistance.This adhesive product possesses excellent

Elastic Thermoplastic Hot Melt Adhesive Film For Laminating Fabrics Product Description Brand Hunter Men Material TPU Model name HT08-66 Mobile +86-15817445470 Colour transparent elastic hot melt adhesive film Application bonding textile, fabric,cotton, nylon,polyester and other materials drapery. Thickness(mm) 0.03,0.04,0.05,0.06,0.08,0.10,0.12,0.15,0.20-0.50 Width(cm) 48,50,96,100,106,137,140,150or can be customerized. Length 100meters/roll or 100yards/roll,or customerized

Product Description EMA/EAA/EMAA (PO)polyolefin hot melt adhesive film for bonding fabrics Melt Point(℃) 85 Colors Transparent First Temperature(℃) 130-150 Seconds Temperature(℃) 140-160 First Time (S) 3-5 Seconds Time (S) 8-15 Pressure: 0.3-0.5bar Pressure: 0.3-0.5bar Washing Test 40(℃) 60(℃) 80(℃) *** ** No Description: PO (EAA) Hot melt adhesive film is us using the high precision coating machine to coating the melting raw materials well-distributed into the release paper,

Match SGS & ISO9001 Standard High Density Hot Melt Adhesive Film For Textile Fabric Type:HT07-40L Description: HT07-40L is a thermoplastic adhesive product , the raw material is polyurethane, the structure is polyurethane film + release paper,it is suitable for wide range of adherend . It can be repeatedly heated for bonding. It performs an excellent adhesion for Polyester,Fabrics,Diving Fabrics,Laica,Jersey,Pu leather,GF,PC,TPU,PVC,Fiber,Nylon and so on. This adhesive

High Elasticity Elongation Polyurethane Hot Melt Adhesive Film used to Composite Soften Elastic Fabrics Model Number:HT07-40L Description: HT07-40L is thermoplastic material, suitable for a variety of materials, it can be heat plasticized adhesive repeated. textile, polyester, cotton, blended fabric, elastic fabrics,carbon fiber fabrics,TPU, PVC, PC / ABS, and has good resilience, elasticity, heat resistance, cold resistance and water resistance.This adhesive product

Resistance washing 60℃ PES Hot Melt Adhesive Film for Textile Fabric Lamination Model Number:HT03 Description: HT03 is environmental friendly thermoplastic material, suitable for a variety of materials, it can be heat plasticized adhesive repeated. This adhesive product possesses excellent chemical additives resistant, and resistance 60℃ washing. Structure: Polyester film +Release Paper Operate machine :iron,high-frequency machine,heat roller machine,flat-bed heat press

Product Description PES hot melt adhesive film for fabric and garment HT03 is a thermoplastic film, it is suitable for a variety of materials , it can stick to materials after one or more times melt by hot temperature,after hot melting and quickly cold speed feature make it use to various high speed production. It has excellent adhesion to textile,plastics(PET, PVC, PC etc),metals(iron,aluminium,copper etc),paper and so on.This product is resistant 60℃ washing. Operate

Product Description Hot Melt Adhesive Film for Textiles Accessories Brand Hunter Men Material EVA,EAA,PO,PES,PA,TPU,PU and so on Model name HT Series Mobile +86-15817445470 Colour transparent or translucent Hot Melt Adhesive Film for Apparel Textiles Accessories Application bonding textile, fabric,cotton, nylon,polyester and other materials drapery. Thickness(mm) 0.03,0.04,0.05,0.06,0.08,0.10,0.12,0.15,0.20-0.50 Width(cm) 48,50,96,100,106,137,140,150or can be customerized.

Product Description Hot Melt Adhesive Film for Fabric Melt Point(℃) 85 Colors Transparent First Temperature(℃) 130-150 Seconds Temperature(℃) 140-160 First Time (S) 3-5 Seconds Time (S) 8-15 Pressure: 0.3-0.5bar Pressure: 0.3-0.5bar Washing Test 40(℃) 60(℃) 80(℃) *** ** NO Description: Hot melt adhesive film is us using the high precision coating machine to coating the melting raw materials well-distributed into the release paper, and the thin film colors is transparent.

Polyester Thermoplastic Adhesive Film White PES Hot Melt Adhesive Films For Embroidered Chapter Gum Description: HT03 is a thermoplastic film, it is suitable for a variety of materials , it can stick to materials after one or more times melt by hot temperature,after hot melting and quickly cold speed feature make it use to various high speed production. It has excellent adhesion to textile,plastics(PET, PVC, PC etc),metals(iron,aluminium,copper etc),paper and so on.This