Electric Power Transformer

S14-M Oil Iron Core Transformer 1600KVA Electric Power Transformer S11/S13/14-M Oil-Immersed Transformer ISO IEC GB 10KV 30-1600KVA 50Hz oil type iron core Product Introduction Product Standards GB1094.1-2013 General rules for power transformers GB1094.2-2013 Power Transformer Temperature Rise GB1094.3-2003 Insulation Level and Insulation Test of Power Transformers GB1094.5-2008 Power transformer withstands short circuit capability GB/T1094.10-2003 Power transformers - Part

S11/S13/14-M Oil-Immersed Transformer 10KV/0.4KV 30-1600KVA 50Hz Product Introduction The three-phase oil-immersed distributing transformer applies a new type of insulating structure and makes short-circuit resistance strong. The iron core is made of a high-quality cold-rolled silicon-steel plate. The high-voltage winding group is made up of high-quality oxygen-free copper lines and it adopts a multilayered drum type structure. All fasteners have been processed with special

KNKONG 50 Kva 100 Kva 1000 Kva Dry Type Transformer Dry - type electrical transformer ISO IEC GB 10/0.4KV 30-1600KVA Product Introduction Dry-type transformers are widely used in local lighting, high-rise buildings, airports, terminal CNC machinery equipment and other places. Simply put, dry-type transformers refer to transformers whose cores and windings are not immersed in insulating oil. Cooling methods are divided into natural air cooling (AN) and forced air cooling (AF).

GB1094 2500KVA Oil Type Electric Power Transformer 10KV 10KV oil type power transformer 30-2500KVA Product Introduction The oil-immersed transformer is a new high-performance transformer with a more reasonable structure and better performance. Its three-dimensional wound core has an equilateral triangle three-dimensional arrangement due to its three core legs. There is no air gap in the magnetic circuit and the winding is tighter. , The three magnetic circuits have the same

S13 High Voltage Full Sealed Oil Immersed Transformer Power Transformer10KV/0.4KV 30-1600KVA 50/60Hz Product Introduction The S13 fully sealed oil-immersed power transformer developed and produced by the company has the advantages of low loss, low noise, and high efficiency, which can achieve good energy-saving effects and reduce pollution. Compared with ordinary oil-immersed transformers, the fully enclosed transformer eliminates the oil conservator. The change of oil volume

30KVA 200KVA 400KVA Oil Immersed Distribution Transformer Product Introduction The three-phase oil-immersed distributing transformer applies a new type of insulating structure and makes short-circuit resistance strong. The iron core is made of a high-quality cold-rolled silicon-steel plate. The high-voltage winding group is made up of high-quality oxygen-free copper lines and it adopts a multilayered drum type structure. All fasteners have been processed with special

SCB dry - type power transformer ISO IEC GB 10/0.4KV 30-1600KVA Product Introduction Low loss, low partial discharge, low noise, strong heat dissipation capacity 150% rated load operation under forced air cooling; Good moisture-proof performance, normal operation under 100% humidity; Safe, flame-retardant, fire-proof, no pollution, and can be installed directly in the load center; Maintenance-free, easy to install, and low overall operating cost. Product Standards GB1094.1

30KVA Electric Power Transformer 10KV Dry Type Distribution Transformer Dry type transformer ISO IEC GB 10KV 30-1600KVA Product Introduction Dry-type transformers are widely used in local lighting, high-rise buildings, airports, terminal CNC machinery equipment and other places. Simply put, dry-type transformers refer to transformers whose cores and windings are not immersed in insulating oil. Product Standards GB1094.1-2013 General rules for power transformers GB1094.2-2013

3-phases oil type power transformer radio10/0.4KV 30-2500KVA ISO IEC GB Product Introduction Oil-immersed transformers use oil as the main insulation means of the transformer and rely on oil as the cooling medium, such as oil-immersed natural cooling, oil-immersed air cooling, oil-immersed water cooling and forced oil circulation. The main components of the transformer are iron core, winding, oil tank, oil pillow, breathing apparatus, explosion-proof tube (pressure release

10/0.4KV 3-phases oil type power transformer 30-2500KVA ISO IEC GB Product Introduction The oil-immersed transformer is one of the important pieces of equipment in the power supply and distribution system of industrial and mining enterprises and civil buildings. It reduces the 10(6)kV or 35kV network voltage to the 230/400V bus voltage used by the user. This type of product is suitable for AC 50 (60) Hz, three-phase maximum rated capacity 2500kVA (single-phase maximum rated