Din Rail Energy Meter

din rail three phase electricity energy meter RS485 Modbus for EV charging CE approved Product Description ADL3000-E/C three phase electric meter is designed for three phase energy measurement on low voltage system.The meter meet the related technical requirement of electronic meter in the IEC62053-21, IEC62053-22standards. Function & Parameter Model ADL3000-E/C Phase Three phase Rated voltage AC100V/220V/380V Consumption

ADL10 din rail energy meter adopts DIN35mm din rail installation with LCD display,it can measure electric parameters and has energy pulse output, RS485 communication,which has the advantages of small size, high precision, good reliability and convenient installation. Technical Features Items Features Environment Temperature -40℃~125℃ Humidity ≤95% atmospheric pressure 86kPa~106kPa ATE100M/100/200 Active wireless temperature sensor Wireless frequency 470MHz Communication

ADL200 Single Phase Din Rail Energy Meter ADL200 din rail energy meter adopts DIN35mm din rail installation with LCD display,it can measure electric parameters and has energy pulse output, RS485 communication,which has the advantages of small size, high precision, good reliability and convenient installation. Technical Features Items Features Environment Temperature -40℃~125℃ Humidity ≤95% atmospheric pressure 86kPa~106kPa ATE100M/100/200 Active wireless temperature sensor

General ACR series network power meter anti-backflow detection single-phase meter is suitable for energy-saving renovation projects in high energy consumption industries such as smelting, steel, electric welding, semiconductor, etc. It is also suitable for power monitoring of distributed photovoltaic grid-connected cabinets, power demand side management and other applications . It supports Ethernet communication, and has the characteristics of no need to remove the busbar

Features ADL10-E 220V Single Phase Kwh Energy Meter AC Power Consumption Meter is a new generation energy meter designed by Acrel Co,.Ltd with many years’ experience in designing electricity meters. Measurement,statistic, communication and LCD display functions are installed in the power meter. This power meter has advantages of high stability, low power consumption and data saving after blackout etc. All meters meet the related technical requirements of electronic power

General sollis inverter energy meter ACR10R16DTE4 three phase energy meter is suitable for energy-saving renovation projects in high energy consumption industries such as smelting, steel, electric welding, semiconductor, etc. It is also suitable for power monitoring of distributed photovoltaic grid-connected cabinets, power demand side management and other applications . Technical parameter Technical parameters sollis inverter energy meter ACR10R16DTE4 three phase energy

General DTSD1352-C three-phase rail type multi-function power meter is a smart meter designed for power monitoring, energy consumption statistics, and management needs of power systems, industrial and mining enterprises, and shared facilities. DTSD1352-C has the advantages of high precision, small size, and convenient installation. . DTSD1352-C integrates all power parameter measurement and comprehensive energy measurement and assessment management, and provides one-way

DTSD1352 Three Phase Multi-Function Energy Meter General DTSD1352 power analyzer specializes in measuring the data of all kinds of AC networks. It can be used for local display, or it is connected with the control equipment in measuring and controlling system. They comply EN 61326:2006 and EN 61010-1:2001. They are a kind of programmable analyzer. With the 2 key on the front, we can choose to read the data that we need. They can be equipped RS-485 communication Modbus-RTU.

DDSY1352-NK/ADL100-EY Prepaid Meters ADL100-EY single phase pre-paid meters with intro-control, ADL100-EY three phase pre-paid meters with intro-control are used for calculating the single and three phase active energy respectively on the frequency of 50Hz. The meter has functions of pre-paid, load controlling and RS485 communication etc. meets the related technical requirements of electronic power meter in the IEC62053-21, IEC62053-22 standards.

Please contact us

ADL 200 Functions Single phase active kWh, 3 months historical energy data frozen storage; Measuring electrical parameters such as voltage, current, apparent power, power factor, frequency, active power, reactive power, etc.; LCD display; Communication protocol: MODBUS-RTU, Communication interface: RS485; Multiple tariffs can be set. Parameters Input voltage Reference voltage AC220V Reference frequency 50Hz Power consumption

ADL200 din rail energy meter adopts DIN35mm din rail installation with LCD display,it can measure electric parameters and has energy pulse output, RS485 communication,which has the advantages of small size, high precision, good reliability and convenient installation. Basic Specification Display Dimension Network FAQ Q:The display power or energy count is inaccurate after the meter powered on. A:Switch the meter display interface to the power (active power P, power factor λ)

In a single inverter system, the meter is connected directly to the inverter. If your inverter has a built-in revenue grade meter (RGM; the inverter is referred to a revenue grade inverter), you can connect an external meter on the same bus as the RGM. Basic Specification Dimension Wiring Installation Connection

AGF-M Perforation type PV confluence acquisition device is specially designed for smart PV combiner box. It is used for monitoring the running state of solar panels in solar cell arrays, measuring the currents of solar cell, detecting the state of surge protection devices and DC breaker. The device is equipped with RS485(Modbus) communication port for transmitting all the datas to master device. Basic specifications and main technical parameters Dimension Installation

Overview Product Description -48V 6 channel 4 circuit DC digital energy power meter for telecom base station Base station dedicated DC energy meter AMC16-DETT is specially designed for base stations where have sharing requirements, and switch power supply is without the function of sub-user metering. The meter could measure 6 circuits DC energy, and supply working current to the matched hall sensors. Meanwhile, it can realize zero drift calibration by upper computer software.

Overview Product Description ADW210 Multi Circuit energy Meter ADW210 series multi-loop power meter is mainly used for the measurement of all electric parameters of three-phase circuit. Colleagues can select the current input of the maximum four circuits. Auxiliary power AC/DC 85～265V; Consumption≤10VA; Input Frequency 45～65Hz; Voltage AC 3×220V/380V; Overload: 1.2 times of rated value (continuous); 2 times of rated value / 1s; Power consumption: ≤ 0.5VA; Current AC 5A,100A

Product Description IoT wireless energy meter ADW300 wireless meter is mainly used to measure three-phase active power in low-voltage network. It has the functions of RS485 communication,2G,4G,NB-IoT and 868MHZ/923MHZ/433MHZ Lora/Lorawan wireless communication. It is convenient for users to monitor, collect and manage electricity. It can be flexibly installed in the distribution box to realize the measurement, statistics and analysis of individual electric energy in different

Overview Product Description ADL 400 ADL series meter adopts DIN35mm guide rail installation structure, LCD display, can set parameters such as time and rate period, and has the function of electric energy pulse output; RS485 communication interface can be used to exchange data with the host computer. The electric energy meter has the advantages of small size, high precision, good reliability, and convenient installation. The sub-item measurement of electric energy can also

ADL3000-E Three-phase Multi-function DIN Rail Energy Meter ● Measurement: 3-phase kWh (0.5S), Active Power, Reactive Power, Current, Voltage, Harmonic and etc ● Voltage Rating: 3x220/380V, 3x57.7/100V (3P4W); 3x380V, 3x100V (3P3W) ● Current Rating: 3x10(80)A; 3x1(6)A ● Frequency: 45~65Hz ● Commnunication: RS485 (MODBUS-RTU) and Infrared ● Multi-rate: Spike, Peak, Valley and Flat kWh ● Extra Function: Cable Temperature Measurement and DO/DI ● Display: LCD (8 digits) ●

Multi-circuits Prepaid Energy Meter ADF400L (1-phase&3-phase) ● Application: Prepaid&Postpaid (See about Acrel Prepaid Solution) ● Monitoring: Up to 36 Circuits 1-phase or 12 Circuits 3-phase or Mixed ● Measurement: 1-phase&3-phase kWh (Class 0.5S), kVarh, Active Power, Reactive Power, Current, Voltage and etc ● Rated Voltage: 3x220/380V (50Hz) ● Rated Current: 80A AC (direct connection); 3x1(6)A AC (via CTs) ● Communication (Main Body): RS485 (MODBUS-RTU); Ethernet; Infrared