Stainless Steel Welding Rod

E347-16 347 Stainless Steel Welding Rod 1/16" 1/8" 1.6MM 2.0MM 2.5MM E347-16 2.0/2.5/3.2/4.0/5.0 mm Stainless Steel Electrodes Descrption of Stainless Steel Electrodes Conform to Standard GB/T 983 E347-16 AWS A5.4 E347-16 ISO 3581-A-E(19 9Nb) R 3 2 ISO 3581-B-ES 347-16 Specification:A132 is a kind of Titanium calcium type coating Cr19Ni10Nb which contains the Nb stabilizing property. It has excellent mechanical properties and inter granular corrosion resistance. Heat

5mm 2.5 Mm 1/8" Stainless Steel Welding Rods E347-16 Ss Welding Electrode E347-16 2.0/2.5/3.2/4.0/5.0 mm Stainless Steel Electrodes E347-16 delivers outstanding performance, especially for projects that require you to do a lot of out-of-position welding. This electrode allows you to weld stabilized austenitic 18Cr-8Ni steels, including those with grades of either the columbium (347) or titanium (312) type. E347-16 offer excellent resistance to sensitization during high

2.5 2mm Stainless Steel Welding Rod E308/308l-16 A102 LT·A102 2.0/2.5/3.2/4.0/5.0 mm Stainless Steel Electrodes Weldcote Metals E308-16 electrodes are used to weld unstabilized 18-8 stainless steels such as Types 301, 302, 304, 305, and 308. Weldcote Metals E308-16 electrodes provide corrosion resistance and physical properties equal to or greater than the steels for which they are recommended. Conform to Standard GB/T 983 E308-16 AWS A5.4 E308-16 ISO 3581-A-E(19 9) R 3 2 ISO

AWS E308l 16 Welding Rod 3/32 Ss 308l Stainless Steel Welding Electrodes E308L-16 2.0/2.5/3.2/4.0/5.0 mm Stainless Steel Electrodes E308L-16 is a kind of Titanium calcium type coating with ultra-low carbon Cr19Ni10 stainless steel electrode. Carbon content of deposited metal is less than or equal to 0.04%. The intergranular corrosion resistance is good. Excellent welding performance and heat resistance, high strength coating, the porosity resistance is good. AC/DC both can be

E308-16 2.0/2.5/3.2/4.0/5.0 mm Stainless Steel Electrodes E308/308L-16 is an extra low carbon electrode for the welding of type 304L, 321, and 347 stainless steels. The controlled ferrite in the weld deposit gives excellent notch toughness at cryogenic temperatures. This electrode deposits a maximum of 0.04% carbon in the weld metal to minimize the formation of chromium carbides and consequent susceptibility to intergranular corrosion. Conform to Standard GB/T 983 E308-16 AWS

LT·A302 2.0/2.5/3.2/4.0/5.0 mm Stainless Steel Electrodes E309-16 is primarily intended for welding heat resistant austenitic Chromium-Nickel steels of similar analysis such as AISI 309 or 309S. Also suitable for joining dissimilar metals such as 18Cr-8Ni stainless steel to mild steel and welding clad surfaces of steel. Conform to Standard GB/T 983 E309-16 AWS A5.4 E309-16 ISO 3581-A-E(22 12) R 3 2 ISO 3581-B-ES 309-16 Purpose:It is used in similar type stainless steel,

E309-16 2.0/2.5/3.2/4.0/5.0 mm Stainless Steel Electrodes E309/309L-16 stainless steel electrode is ideal for joining stainless steels to themselves or to carbon and low-alloy steels. Carbon content in the weld metal is held to 0.04% max which gives it increased resistance to intergranular corrosion. Conform to Standard GB/T 983 E309-16 AWS A5.4 E309-16 ISO 3581-A-E(22 12) R 3 2 ISO 3581-B-ES 309-16 Specification:A302 is a, calcium-titanium coated, Cr23Ni13 stainless steel

E308L-16 2.0/2.5/3.2/4.0/5.0 mm Stainless Steel Electrodes E308L-16 is a kind of Titanium calcium type coating with ultra-low carbon Cr19Ni10 stainless steel electrode. Carbon content of deposited metal is less than or equal to 0.04%. The intergranular corrosion resistance is good. Excellent welding performance and heat resistance, high strength coating, the porosity resistance is good. AC/DC both can be applied. E308L-16 electrodes were developed for the welding of Type 304L

E347-16 2.0/2.5/3.2/4.0/5.0 mm Stainless Steel Electrodes E347-16 delivers outstanding performance, especially for projects that require you to do a lot of out-of-position welding. This electrode allows you to weld stabilized austenitic 18Cr-8Ni steels, including those with grades of either the columbium (347) or titanium (312) type. E347-16 offer excellent resistance to sensitization during high temperature service. Conform to Standard GB/T 983 E347-16 AWS A5.4 E347-16 ISO

E347-16 2.0/2.5/3.2/4.0/5.0 mm Stainless Steel Electrodes Conform to Standard GB/T 983 E347-16 AWS A5.4 E347-16 ISO 3581-A-E(19 9Nb) R 3 2 ISO 3581-B-ES 347-16 Purpose:Used for welding important corrosion resistant stainless steel this contains stable Ti such as 06Cr18Ni11Ti. Specification:A132 is a kind of Titanium calcium type coating Cr19Ni10Nb which contains the Nb stabilizing property. It has good mechanical properties and inter granular corrosion resistance. Good

LT·A102 2.0/2.5/3.2/4.0/5.0 mm Stainless Steel Electrodes Weldcote Metals E308-16 electrodes are used to weld unstabilized 18-8 stainless steels such as Types 301, 302, 304, 305, and 308. Weldcote Metals E308-16 electrodes provide corrosion resistance and physical properties equal to or greater than the steels for which they are recommended. Conform to Standard GB/T 983 E308-16 AWS A5.4 E308-16 ISO 3581-A-E(19 9) R 3 2 ISO 3581-B-ES 308-16 Specification:A102 is a kind of

E308-16 2.0/2.5/3.2/4.0/5.0 mm Stainless Steel Electrodes Conform to Standard GB/T 983 E308-16 AWS A5.4 E308-16 ISO 3581-A-E(19 9) R 3 2 ISO 3581-B-ES 308-16 Purpose:Used for welding the corrosion resistant stainless steel structure, such as 06Cr19Ni10 and 06Cr18Ni11Ti and their working temperature should be below 300℃ Specification:A102 is a kind of Titanium calcium type coating Cr19Ni10 stainless steel electrode. The deposited metal has good mechanical properties and inter

A309-16 2.0/2.5/3.2/4.0/5.0 mm Stainless Steel Electrodes Conform to Standard GB/T 983 E309-16 AWS A5.4 E309-16 ISO 3581-A-E(22 12) R 3 2 ISO 3581-B-ES 309-16 Specification:A302 is a, calcium-titanium coated, Cr23Ni13 stainless steel electrode. The deposited metal has good crack-resistance and oxidation resistance. The electrode can operate on AC/DC. It is easy to operate. Purpose:It is used in similar type stainless steel, dissimilar stainless steel and high chromium steel

LT·A132 2.0/2.5/3.2/4.0/5.0 mm Stainless Steel Electrodes A132 is designed for welding AISI 347 and AISI 321 alloys. The columbium content acts as a stabilizer and prevents carbide precipitation. Conform to Standard GB/T 983 E347-16 AWS A5.4 E347-16 ISO 3581-A-E(19 9Nb) R 3 2 ISO 3581-B-ES 347-16 Specification:A132 is a kind of Titanium calcium type coating Cr19Ni10Nb which contains the Nb stabilizing property. It has good mechanical properties and inter granular corrosion

308L Stainless Steel Flux-Cored Wire ER308LT-1 1.2/1.4/1.6mm E308L Stainless Steel flux cored wire Specification:LT·E308L is a kind of gas shielded stainless steel flux cored wire,soft and stable arc,lower spatter,beautiful appearance,easy to slag removal,it has good welding performance and all position welding.The deposited metal has excellent mechanical properties and intercrystalline corrosion-resistance. Conform to Standard GB/T 17853 E308LT1-1 AWS A5.22 E308LT1-1 Purpose

[SS Electrodes] A302 GB E309-16 AWS A5.4 E309-16 Calcium-Titanium Coated,Cr23Ni13 Stanless Steel Electrode E309-16 2.0/2.5/3.2/4.0/5.0 mm Stainless Steel Electrodes Conform to Standard GB/T 983 E309-16 AWS A5.4 E309-16 ISO 3581-A-E(22 12) R 3 2 ISO 3581-B-ES 309-16 Specification:A302 is a, calcium-titanium coated, Cr23Ni13 stainless steel electrode. The deposited metal has good crack-resistance and oxidation resistance. The electrode can operate on AC/DC. It is easy to

[SS Welding Electrodes] A102 GB E308-16 AWS A5.4 E308-16 2.0mm 2.5mm 3.2mm 4.0mm 5.0mm LT·A102 2.0/2.5/3.2/4.0/5.0 mm Stainless Steel Electrodes Weldcote Metals E308-16 electrodes are used to weld unstabilized 18-8 stainless steels such as Types 301, 302, 304, 305, and 308. Weldcote Metals E308-16 electrodes provide corrosion resistance and physical properties equal to or greater than the steels for which they are recommended. Conform to Standard GB/T 983 E308-16 AWS A5.4

[SS Electrodes] A132 GB E347-16 AWS A5.4 E347-16 Stainless Steel Welding Rods 2.0mm 2.5mm 3.2mm 4.0mm 5.0mm E347-16 2.0/2.5/3.2/4.0/5.0 mm Stainless Steel Electrodes E347-16 delivers outstanding performance, especially for projects that require you to do a lot of out-of-position welding. This electrode allows you to weld stabilized austenitic 18Cr-8Ni steels, including those with grades of either the columbium (347) or titanium (312) type. E347-16 offer excellent resistance