Ceramic Structured Packing

AWT CERADUR 350Y 150mm Layer Height AWT CERADUR 350Y(ceramic structured packing) will be applied in the plant of DSM group Vitamin branch in Shanghai... Send InquiryChat Now Product Details For more than ten years, AWT CERADUR(ceramic structured packing has been successfully applied in the columns of DSM group due to its stable performance and high separation efficiency. Hot Tags: awt ceradur 350y 150mm layer height, China, manufacturers, suppliers, factory, customized, price

ceramic structured packing for distillation technology The Product introduction: ceramic structured packing for distillation technology produced by Hunan Liling AWT has very high separation efficiency and large specific surface area, and these has been introduced with great success in the treatment of highly corrosive fluids. Product parameter ( for ceramic structured packing for distillation technology) parameter Water absorption Bulk density Porosity rate Acid- resistance

ceramic structured packing for hydrobromic acid The Product introduction (Product feature and application) Ceramic structured packing has been proved to improve the operational performance notably after revamping, the production capacity has increased by 50%, the purity of processed chemicals has meet the international standard. Product parameter ( ceramic structured packing for hydrobromic acid ) parameter Water absorption Bulk density Porosity rate Acid- resistance 190

ceramic structured packing for desulfidation column The Product introduction (Product feature and application) The de hydrogen sulfide columns has been revamped with ceramic structured packing, which shows more advantage than former, for example, the alkaline consumption has been reduced considerably, the hydrogen sulfide content could reduced to o value , meanwhile the packing could be kept in good condition with much less maintenance because of corrosion resistance

ceramic structured packing with 100mm layer height The Product introduction: ceramic structured packing with 150mm layer height with the characteristic of easier installation into the column and high liquid and vapor loading,low pressure drop. Product parameter ( for ceramic structured packing with 100mm layer height) parameter Water absorption Bulk density Porosity rate Acid- resistance 190 centigrade degree Temperature limit test 0.31% 2,51 g/cm3 1.08 % 99.90% No change in

ceramic structured packing for hydrochloric acid The Product introduction (Product feature and application) The investment cost for revamping continuous distillation column(based on capacity 1000t/year) with ceramic structured packing is 50% compared with the original old one(500t/year), while operation pressure has raised two times than before, the pureness of product has been advanced to 98% from 95%. Product parameter ( ceramic structured packing for hydrochloric acid )

ceramic structured packing for recovery column The Product introduction (Product feature and application) The ceramic structured packing has been applied widely and successfully in the continuous and non-continuous columns in the field of chemical fertilizer, pesticide, pharmaceutical, colourant and perfume industry. The recovery rate has been proved much higher. Product parameter ( ceramic structured packing for recovery column ) parameter Water absorption Bulk density

ceramic structured packing with 150mm layer height The Product introduction: ceramic structured packing with 150mm layer height with the characteristic of easier installation into the column and high liquid and vapor loading,low pressure drop. Product parameter ( for ceramic structured packing with 150mm layer height) parameter Water absorption Bulk density Porosity rate Acid- resistance 190 centigrade degree Temperature limit test 0.31% 2,51 g/cm3 1.08 % 99.90% No change in

ceramic structured packing for chlorinated hydrocarbons The Product introduction (Product feature and application) The ceramic structured packing has been used in the revamping column and new column for chlorinated hydrocarbon chemicals, the production capacity could be enhanced by 25%, and the back flow time has been shortened, so such application could contribute to obvious energy saving. Product parameter ( ceramic structured packing for chlorinated hydrocarbons) parameter

ceramic structured packing for fatty acid chlorides The Product introduction (Product feature and application) The ceramic structured packing, which is more economical and corrosion resistance and a good& suitable substitute of other costly packing type, has been used in distillation column for fatty acid chlorides, it shows that the chemicals with 330 formula weight could be distilled perfectly. Product parameter ( ceramic structured packing ) parameter Specific surface area

ceramic structured packing for fatty acid anhydrides The Product introduction (Product feature and application) The ceramic structured packing has been used in distillation column for compound fatty acid anhydrides, it proves that purity quotient of product could be up to more than 85%, at the same time it is more cost saving packing type compared with Titanium structured packing. Product parameter ( ceramic structured packing ) parameter Specific surface area Void fraction

ceramic structured packing for acetic ester The Product introduction (Product feature and application) The ceramic structured packing has been adopted in the esterification column and recovery column for separation of acetic ester, the output has been raised by 20% than the former design due to higher separation efficiency and low drag force. Product parameter ( ceramic structured packing for acetic ester ) parameter Water absorption Bulk density Porosity rate Acid-

250Y ceramic structured packing The Product introduction: This type of ceramic structured packing has good separation efficiency with wide turn down ratio, easy to scale up , its good geometrical structure could avoid block. Product parameter (chemical composition for 250Y ceramic structured packing) parameter Specific surface area Void fraction chamfer Hydraulic diameter Liquid load Pressure drop Theorectical plate Bulk density 250y 250m2/m3 80% 45 12mm 0.2-100m3/(m2.h) 2.2

350Y ceramic structured packing The Product introduction: The sheet thickness of This type of ceramic structured packing could be adjusted to 1.2mm to 1.6mm according to customer’s design requirement, so this could reduce its bulk density for column packing. Product parameter (chemical composition for 350Y ceramic structured packing) parameter Specific surface area Void fraction chamfer Hydraulic diameter Liquid load Pressure drop Theoretical plate Bulk density 350y 350m2/m3

450Y ceramic structured packing The Product introduction: Higher firing temperature (1380-1410 centigrade) Complete porcelain vitrification ensure the performance of corrosion-resistance and operational life-span. Particle fineness of chemical composition of this 450y ceramic structured packing could be 0.2-0.6%. Product parameter (chemical composition for 450Y ceramic structured packing) parameter Specific surface area Void fraction chamfer Hydraulic diameter Liquid load

ceramic structured packing with 200mm layer height The Product introduction: ceramic structured packing with 200mm layer height with the characteristic of easier installation into the column, wide turn down ratio, easy to scale up, considerable energy saving. Product parameter (chemical composition for ceramic structured packing with 200mm layer height) parameter Specific surface area Void fraction chamfer Hydraulic diameter Liquid load Pressure drop Theoretical plate Bulk

ceramic structured packing for absorption technology The Product introduction: ceramic structured packing for absorption technology of Hunan Liling AWT, which has been specializing in producing highest quality standard products, is suitable for absorption application in most acids, both organic and inorganic. Product parameter ( for ceramic structured packing for extraction technology) parameter Water absorption Bulk density Porosity rate Acid- resistance 190 centigrade

ceramic structured packing for extraction technology The Product introduction: ceramic structured packing for extraction technology manufactured by Hunan Liling AWT based on highest quality standard has been successfully applied in extraction technology for chemical group in Europe. Product parameter ( for ceramic structured packing for extraction technology) parameter Water absorption Bulk density Porosity rate Acid- resistance 190 centigrade degree Temperature limit test 0

ceramic structured packing for separation technology The Product introduction: Hunan Liling AWT, who has been famous for specializing on producing all types of ceramic structured packing for separation technology, has much experience in this field for more than 14 years. Product parameter ( for ceramic structured packing for separation technology) parameter Water absorption Bulk density Porosity rate Acid- resistance 190 centigrade degree Temperature limit test 0.31% 2,51 g

ceramic structured packing for mass-transfer process The Product introduction: Ceramic structured packing for mass-transfer process with following characteristic: -- lower pressure drop -- high capacity -- more number of theoretical stages. Product parameter ( for ceramic structured packing for mass-transfer process) parameter Water absorption Bulk density Porosity rate Acid- resistance 190 centigrade degree Temperature limit test 0.31% 2,51 g/cm3 1.08 % 99.90% No change in