DC Servo Drive

Small Size EtherCAT servo drive Absolutely Encoder DC10V to DC36V AGV Servo Drive Application features of DC Servo Motor Drive 1. Adaptation to DC servo motors up to 400W, 750W, 1000W, supporting incremental and absolute encoders. 2. Support for position control, speed control, torque control and single axis control modes. 3. EtherCAT communication for multi-axis device control. Complementary functions of DC Servo Motor Drive 1. Modbus serial communication protocol (RS485). 2

48V Low‑Voltage Servo Driver RS485 CANopen Optional EtherCAT AGV Mobile Robot Servo Controller This low‑voltage servo drive is widely used in automated mobile robot (AMR), AGV handling trolley, warehouse logistics robot, service robot, Technical Specifications Item Specification Parameter Applicable Rated Motor Power 400W / 1000W Low‑voltage Servo Motor Encoder Feedback Type Incremental Encoder & Absolute Encoder Supported Working Control Mode Position Control / Speed Control

High Security Subway Swing Gate Control Motherboard Equipped With 24 Pairs Infrared Sensors, Compatible With RS232, RS485 And CAN Protocol Technical parameter Input Voltage DC 24 ~ 30V Reference Current Single-sided 3A (depending on the light load decision) Infrared sensor input PNP|NPN NO|NC 12V|24V 12 independent IR interfaces on board External IR expansion board available Communication Interface RS232/RS485/CAN Sound and light control Welcome light, pass light, RGB

MBC2406 Turnstile Control Board – 24V DC, 6 Sensor Inputs, RS232/RS485/CAN Product Description The MBC2406 Turnstile Gate Control Board is a high-performance, intelligent DC servo driver specifically engineered for tripod turnstile gates, speed gates, swing gates, and pedestrian access lanes. Designed to operate on a safe DC24V power supply with a rated power of 150W, this control board serves as the central processing unit for modern access control systems, managing the

48V 12A Low-Voltage Servo Driver With Speed/Position/Torque Control, RS232/RS485/CAN, Incremental & Absolute Encoder, For AGV Robots This 48V 12A low-voltage servo driver is a high-performance DC drive unit specially developed for AGV robots and intelligent mobile automation equipment. It supports both incremental and absolute encoders, equipped with RS232, RS485 and CAN industrial communication interfaces. Multi communication ports : RS232 / RS485 / CAN onboard. Specificatio

GL11-10612 is a 24-60V DC 12A high overload DC servo drive designed for heavy-load mobile robots and industrial automation.RS232 / RS485 / CAN communication and 300% peak overload capability, providing strong starting torque and smooth speed control under demanding working conditions. Key Selling Points 1. RS232 / RS485 / CAN Communication Equipped with RS232, RS485 and CAN bus interfaces supporting CANopen protocols. Users can monitor torque, speed and fault status in real

20-60V DC 12A low voltage DC servo drive engineered for high precision motion control applications. It integrates a 17-bit absolute encoder interface, RS232 / RS485 / CAN triple communication ports , delivering reliable and repeatable servo control for AGV, AMR, robotic arm and precision automation equipment. Key Selling Points 1. High-Precision Control Built-in 17-bit absolute encoder feedback with high resolution position detection, no homing required after power-on.

Product Description: DC Servo Drive is a cutting-edge drive type, offering reliable performance in extreme conditions. With an ambient temperature range of -20℃-50℃, it is designed to provide excellent performance and protection against harsh environment. The drive size is 174.5*97.5*28.8mm, and it has a protection level of IP20. It also offers a speed range of 3000RPM. Moreover, DC Servo Drive is equipped with Modbus serial communication protocol (RS485), which ensures easy

Compatible with low-voltage servo motors, featuring dual closed-loop control: the first loop uses an incremental encoder for feedback input; the second loop uses a Tamagawa absolute encoder. Supports RS485 and CANopen communication. Utilizes a new generation of servo control algorithms for high-speed response. Supports external pulse command input and has built-in internal position positioning function, supporting point-to-point control such as homing and positioning. Rated

Small-Size Incremental Low-Voltage Servo Drives Compact servo drives designed for automation industry applications, compatible with low-voltage servo motors and featuring advanced control capabilities. , K ey Features Dual closed-loop control system with incremental encoder and Tamagawa absolute encoder RS485 and CANopen communication support Advanced servo control algorithms for high-speed response External pulse command input capability Built-in internal position positionin

DC Servo Drive 24V to 80V Low Voltage AGV robot DC Servo Drive Product Description The AGV Robot DC 24-80V Low Voltage Servo Drive is a high-performance motor control solution designed for Automated Guided Vehicles (AGVs) and robotics applications. Operating within a wide voltage range of 24V to 80V DC, this servo drive ensures precise motion control, energy efficiency, and robust performance. Equipped with advanced bus over-voltage protection, it safeguards your system from

Incremental Encoder Low Voltage Servo Drive 30A 24V DC For Automatic Equipment Features of DC Servo Drive ① Adapt to DC servo motor below 400W,support incremental and absolute encoder; ② Support position control, speed control, torque control and single axis control mode; ③ RS485/CANopen bus communication,can beused for multi-axis equipment control; Advantages of DC Servo Drive ① The motor winding protects the power supply from short circuit ② Over-current protection ③

DC Servo Motor Drive 48v 17 Bits Absolute Encoder for AGV Logistic Sorting Product description of DC Servo Motor Drive Shenzhen Jiayu Mechatronic CO., Ltd Peristaltic pumps l11-10630 series are designed to working with servo drive, adopts 17 bits absolute encoder, suitable for indoor and outdoor situation, easy to install, and our servo motor widely use for Logistics sorting, medical instruments, 3C equipment, packaging, etc. Products features of Peristaltic Pump motor 1.

Low Voltage DC24V 12A Incremental Encoder Servo Drive For Robotic AGV Transporters Features ① Adapt to DC servo motor below 400W,support incremental and absolute encoder; ② Support position control, speed control, torque control and single axis control mode; ③ RS485/CANopen bus communication,can beused for multi-axis equipment control; Advantages ① The motor winding protects the power supply from short circuit ② Over-current protection ③ Encoder disconnection protection

DC Servo Drive RS485+pulse CAN Servo Driver Absolutely Encoder DC10V to DC36V AGV Handling Robot Application features of DC Servo Drive 1. Adaptation to DC servo motors up to 400W, 750W, 1000W, supporting incremental and absolute encoders. 2. Support for position control, speed control, torque control and single axis control modes. 3. RS485+pulse CAN communication for multi-axis device control. Complementary functions of DC Servo Drive 1. Modbus serial communication protocol

DC18V~48V DC Servo Drive Small Size Absolutely Encoder for AGV Robot Warehouse Product description of industry AGV robot DC servo drive L12 series DC servo system from Jiayu Mechatronic. In order for you to use this servo product correctly, this manual systematically introduces the naming rules of the servo driver and motor, confirmation of the driver and motor matching, wiring, use, parameter setting, precautions for use and fault diagnosis, etc. The L12 series of DC servo

DC Servo Drive Highly Integrated With Incremental or Absolutely Encoder for Industrial AGV Robot Product description of industry AGV robot DC servo drive L12 series DC servo system from Jiayu Mechatronic. In order for you to use this servo product correctly, this manual systematically introduces the naming rules of the servo driver and motor, confirmation of the driver and motor matching, wiring, use, parameter setting, precautions for use and fault diagnosis, etc. The L12

Low Voltage DC Servo Motor Drive 24V 12A Absolutely Encoder For Industrial Robot Features ① Adapt to DC servo motor below 400W,support incremental and absolute encoder; ② Support position control, speed control, torque control and single axis control mode; ③ RS485/CANopen bus communication,can beused for multi-axis equipment control; Advantages ① The motor winding protects the power supply from short circuit ② Over-current protection ③ Encoder disconnection protection

DC Servo Drive Medical Instruments 24V DC Servo Drive With Absolute Encoder Features of DC Servo Drive 1. Small air gap, small positioning torque, low noise, low vibration, low torque ripple. 2. The motor slot full rate is high, the winding end is optimized, the copper loss is minimized, the magnetic load is high, the iron loss is minimized, the volume is small, the weight is light, the heat is low, and the efficiency is high. 3. Servo drive motor which effectively controls

Turnstile Servo Driver,Dedicated Servo Drivers For Turnstile, Speed Gates, And Low-voltage Servo Drivers. Input Voltage DC 24 / 48V Rated / Peak Current 8A / 24A Communication interface RS232/RS485/CAN Encoder feedback Incremental Hall Effect 2400 Line Magnetic Tape Hall Effect Certification Certificate CE/ROHS Hardware protection Undervoltage, overvoltage, overcurrent, and overtemperature detection Operating temperature -25℃~55℃ Digital Input/Output 4 IN 3 OUT, Optocouplers