Carbon Steel Bar

AISI 1008 Carbon Structural Steel Bar S10C Round Bar 1.1122 Cold Rolled Steel Rod Product Description 1008 is a high-quality carbon structural steel. It is a very soft carbon steel with low strength and hardness, but extremely high toughness and plasticity. It has good cold working properties and welding properties such as deep drawing, drawing, bending and upsetting. However, there is aging sensitivity, and the hardenability and hardenability are extremely low. Most of them

AISI 1015 JIS S15C Carbon Structural Steel Bar DIN C15(1.0401) Cold Rolled Round Bar Product Description 1015 carbon steel has high plasticity and toughness, but low strength and hardness, good forging, welding and cold stamping properties, and high cold deformation plasticity, but it is not easy to obtain a smooth surface during cutting. Product Name Carbon Steel Bar Diameter 4.00mm-1020.00mm or as required Length 1m-12m, 6m or as required Technique Hot rolled / cold rolled

AISI 1020 High-Quality Carbon Structural Steel Bar Round Bar Cold Rolled Steel Rod Product Description 1020 is a high-quality carbon structural steel. The strength of this steel is slightly higher than that of 1015 steel. It has good toughness, plasticity and weldability. It is rarely quenched and has no temper brittleness. Cold deformation has high plasticity, and is generally used for bending, calendering, flanging and hammer arch processing. The welding performance of arc

AISI 4135 Hot Rolled Steel Rod A29/A29M-04 Alloy Structural Steel Bar Round Steel Bar Product Description 4135 steel has high static strength, impact toughness and high fatigue limit, higher hardenability than 40Cr, high creep strength and lasting strength at high temperature, long-term working temperature can reach 500 ℃; plasticity during cold deformation Moderate, poor weldability. Used as important structural parts that work under high load, such as transmission parts of

AISI/SAE 1045 Hot Rolled Steel Bar DIN 1.0503 Bright Round Bar S45C Steel Rod Product Description 1045 steel is a medium carbon high-quality steel with high strength. Due to its poor hardenability, it is generally used in a normalized state. When the mechanical properties are required to be high, it is quenched and tempered. The cold deformation plasticity is medium, and the machinability of annealing and normalizing is better than that of quenching and tempering. It is used

AISI/SAE 1045 Cold Rolled Steel Bar DIN 1.0503 Round Bar S45C Steel Rod Product Description 1045 steel, with a carbon content of more than 0.4%, has excellent wear resistance, but its ductility is reduced, and it is easy to deform and crack during quenching. Therefore, heat treatment is extremely important, and it must be quenched after tempering to avoid temper brittleness. The machinability of this type of carbon steel can be improved by spheroidizing the steel. Product

4140 Hot Rolled Steel Bar ASTM A29/A29M-04 Bright Round Bar Alloy Structural Steel Rod Product Description 4140 steel is an alloy structural steel with high strength, hardenability, good toughness and small deformation during quenching. It is used to manufacture forgings that require higher strength and larger quenched and tempered section than 35CrMo steel, such as large gears for locomotive traction, supercharger transmission gears, rear axles, connecting rods and spring

4140 Steel Bar Alloy Structural Cold Rolled Steel Bar ASTM A29/A29M-04 Bright Round Steel Rod Product Description 4140 steel is an alloy structural steel with high strength, hardenability, good toughness and small deformation during quenching. It is used to manufacture forgings that require higher strength and larger quenched and tempered section than 35CrMo steel, such as large gears for locomotive traction, supercharger transmission gears, rear axles, connecting rods and

4130 Steel Bar Structural Steel Cold Rolled Steel Bar ASTM A29/A29M-04 Bright Round Steel Rod Product Description 4130 structural steel has high strength and toughness, high hardenability, and the critical hardenable diameter in oil is 15-70mm; the hot strength of steel is also good, with sufficient high temperature strength below 500 ℃, but at 550 ℃ Its strength decreases significantly; when the alloying element is at the lower limit, the welding is quite good, but when it

4130 Steel Bar Structural Steel Cold Rolled Steel Bar ASTM A29/A29M-04 Bright Round Steel Rod Product Description 4130 is usually used in a quenched and tempered state, and when the carbon content is the lower limit, it can also be used as a carburized steel that requires higher core strength. In the medium-sized machinery manufacturing industry, it is mainly used to manufacture quenched and tempered parts with large cross-sections that work under high stress conditions, such

ASTM 4130 Hot Rolled Steel Rod A29/A29M-04 Round Steel Bar Structural Steel Bar Product Description 4130 is usually used in a quenched and tempered state, and when the carbon content is the lower limit, it can also be used as a carburized steel that requires higher core strength. In the medium-sized machinery manufacturing industry, it is mainly used to manufacture quenched and tempered parts with large cross-sections that work under high stress conditions, such as shafts,

SAE 4135 Round Steel Bar Cold Rolled Steel Rod A29/A29M-04 Alloy Structural Steel Bar Product Description 4135 steel has high static strength, impact toughness and high fatigue limit, higher hardenability than 40Cr, high creep strength and lasting strength at high temperature, long-term working temperature can reach 500 ℃; plasticity during cold deformation Moderate, poor weldability. Used as important structural parts that work under high load, such as transmission parts of