Bursting Strength Tester

Textile Testing Machine Automatic Bursting Strength Tester Standards ASTM D3786-06 ISO 13938-2 ISO 2758 EDANA 80.3-99 NEXT 22 IWS TM29 GB/T 7742.1 Woolmark TM29 M&S P27 Product Instruction The Pneumatic Autoburst is designed to determine the bursting strength and distension of specimens using pneumatic inflation method. Testing scope covers: woven, knitted and non-woven fabrics, papers and carton boards. - Four testing modes: Beside the two traditional testing modes

REFOND Textile Testing Equipment Hydraulic Bursting Strength Tester Testing Standards ASTM D3786-06 BS 3424-6-B ISO 13938-1 ISO 3303-B ERT 80-4.02 GB/T 7742.1 Test Scope Testing the knitted, woven and non-woven fabric, paper and cardboard in the bursting of the largest height and bursting pressure values. Product Instruction To determine the bursting strength and distension at burst of woven, knitted and non-woven fabrics, paper and carton boards by application of hydraulic

REFOND Textile Testing Equipment Floor Type Standards ASTM D3786-06 BS 3424-6-B ISO 13938-1 ISO 3303-B ERT 80-4.02 GB/T 7742.1 Applications Testing the knitted, woven and non-woven fabric, paper and cardboard. Product Instruction To determine the bursting strength and distension of woven, knitted and non-woven fabrics, paper and carton boards by application of hydraulic pressure under a rubber diaphragm, thus to transfer the pressure to the

Floor Type Auto Bursting Strength Tester With Four Testing Modes, 6000kPa, Distension Measurement Up To 70mm Standards ASTM D3786-06 BS 3424-6-B ISO 13938-1 ISO 3303-B ERT 80-4.02 GB/T 7742.1 Product Instruction To determine the bursting strength and distension of woven, knitted and non-woven fabrics, paper and carton boards by application of hydraulic pressure under a rubber diaphragm, thus to transfer the pressure to the test specimen. - Four testing modes: Beside the two

Textile Testing Machine Auto Bursting Strength Tester Order Information RF306A Pneumatic Autoburst RF306A/1 Diaphragms (pack of 10pcs) RF306A/2 Bell and clamping ring set: 7.1cm2 (diameter: 30mm) RF306A/3 Bell and clamping ring set: 7.3cm2 (diameter: 30.5mm) RF306A/4 Bell and clamping ring set: 7.55cm2(diameter: 31mm) RF306A/5 Bell and clamping ring set: 10cm2 (diameter: 35.7mm) RF306A/6 Bell and clamping ring set: 50cm2 (diameter: 79.8mm) RF306A/7 Bell and clamping ring set:

Textile Testing Equipment Automatic Burst Strength Tester Product Specifications - Testing pressure ranges from 100kPa to 1000kPa. - Distension: max. 70mm - Non-contact Laser Displacement Sensor - Four Testing Modes - Six types of testing kits: 7.1cm2 (diameter: 30mm), 7.3cm2 (diameter: 30.5mm), 7.55cm2(diameter: 31mm), 7.55cm2(diameter: 31mm), 10cm2 (diameter: 35.7mm), 50cm2 (diameter: 79.8mm), 100cm2 (diameter: 113mm) - Auto Recognition of the testing bells and clamping

Textile Testing Equipment Floor Type Automatic Burst Strength Testing Machine Product Specifications: - The Maximum pressure capacity: 6000kPa (800PSI)； - Max. Distension: 70mm； - Test Bells: Diameter: 30mm,Diameter: 30.5mm,Diameter: 31.5mm,Diameter: 35.7mm,Diameter: 79.8mm, Diameter: 112.8mm； Product Instruction To determine the bursting strength and distension of woven, knitted and non-woven fabrics, paper and carton boards by application of hydraulic pressure under a

Textile Testing Equipment Floor Type Hydraulic Bursting Strength Tester With Four Testing Modes Product Instruction To determine the bursting strength and distension of woven, knitted and non-woven fabrics, paper and carton boards by application of hydraulic pressure under a rubber diaphragm, thus to transfer the pressure to the test specimen. - Four testing modes: Beside the two traditional testing modes (Automatic Bursting Mode and Fixed Flow Rate Bursting Mode), additional

Textile Testing Equipment Tabletop Hydraulic Bursting Strength Tester With Four Testing Modes Product Instruction To determine the bursting strength and distension at burst of woven, knitted and non-woven fabrics, paper and carton boards by application of hydraulic pressure under a rubber diaphragm, thus to transfer the pressure to the test specimen. RF306B is a table-top mode, which is equipped with high precision pressure sensor, non-contact displacement measurement sensor,

Textile Testing Equipment Pneumatic Bursting Strength Tester With Four Testing Modes New Appearance Design Product Instruction The Pneumatic Autoburst is designed to determine the bursting strength and distension of specimens using pneumatic inflation method. Testing scope covers: woven, knitted and non-woven fabrics, papers and carton boards. - Four testing modes: Beside the two traditional testing modes (Automatic Bursting Mode and Fixed Flow Rate Bursting Mode), additional

Textile Testing Equipment Pneumatic Bursting Strength Tester With Four Testing Modes Product Instruction The Pneumatic Autoburst is designed to determine the bursting strength and distension of specimens using pneumatic inflation method. Testing scope covers: woven, knitted and non-woven fabrics, papers and carton boards. - Two testing modes: Automatic Bursting Mode and Fixed Flow Rate Bursting Mode can meet the requirement of existing standards. - Non-contact Laser

REFOND Pneumatic Bursting Strength Tester Standards ASTM D3786-06 ISO 13938-2 ISO 2758 EDANA 80.3-99 NEXT 22 IWS TM29 GB/T 7742.1 Woolmark TM29 M&S P27 Applications Testing the knitted, woven and non-woven fabric, paper and cardboard. Product Instruction The Pneumatic Autoburst is designed to determine the bursting strength and distension of specimens using pneumatic inflation method. Testing scope covers: woven, knitted and non-woven fabrics, papers and carton boards. - Four

Tabletop Auto Bursting Strength Tester With Four Testing Modes, 6000kPa, Distension Measurement Up To 70mm Testing Standards ASTM D3786-06 BS 3424-6-B ISO 13938-1 ISO 3303-B ERT 80-4.02 GB/T 7742.1 Product Instruction To determine the bursting strength and distension at burst of woven, knitted and non-woven fabrics, paper and carton boards by application of hydraulic pressure under a rubber diaphragm, thus to transfer the pressure to the test specimen. RF306B is a table-top

Tabletop Automatic Burst Strength Testing Machine Specifications a) The Maximum pressure capacity: 6000kPa (800PSI)； b) Max. Distension: 70mm； c) Four Test Modes d) Test Bells: Diameter: 30mm,Diameter: 30.5mm,Diameter: 31.5mm,Diameter: 35.7mm,Diameter: 79.8mm, Diameter: 112.8mm,； e) Test Bell Control: Two button control or Touchscreen control； f) Preset number of test samples g) Automatic recognition for the bell size and diaphragm ring h) Test results are saved automatically