Angle Seat Valve

Double Acting DN15 1/2 inch Stainless Steel Pneumatic Water Steam Control Angle Seat Valve Description Body: SS304,SS316,SS316L Stem: SS304,SS316,SS316L Pneumatic actuators: PA, stainless steel Seats: PTFE Ends: Thread BSP, BSPT, NPT Pressure:16bar Air pilot pressure:0.6Mpa Size: 3/8″ – 4″ (10mm – 100mm) Ambient temperature: PA: -40 °C to + 60 °C ; stainless steel: -40 °C to + 80 °C Control medium:Neutral gases, air Temperature range: -40 °C to + 180 °C (depending on pressure

forged Threaded air control pneumatic stainless steel angle seat valve Angle seat valves are 2/2-way pneumatically actuated piston valves. The piston actuator provides a linear motion to lift the seal off its seat. Because the seat is positioned under an angle, the flow is minimally impeded in the open position, resulting in an excellent flow rate and a low pressure loss. They are used to regulate the flow of liquids, gases, steam, vacuum and even aggressive fluids. They can

Stainless Steel Angle Seat Valve Angle seat valves are 2/2-way pneumatically actuated piston valves. The piston actuator provides a linear motion to lift the seal off its seat. Because the seat is positioned under an angle, the flow is minimally impeded in the open position, resulting in an excellent flow rate and a low pressure loss. They are used to regulate the flow of liquids, gases, steam, vacuum and even aggressive fluids. They can also operate with high temperatures

304/316/316L Air Operated Pneumatic Stainless Steel Thread Angle Seat Valve Technical Data: Fluid Pressure : Max×1.6MPa(232psi) Control Pressure:0.3-0.8MPa(43.5-116psi) Control Fluid: Neutral gas,Air Actuator Size:27mm,32mm,40mm,50mm,63mm,80mm,100mm,125mm Applicable Fluid:Water,Alcohol,Oil,Dye,Steam,Neutral gas or liquid,Organic solvent,Acid and lye Fluid temperature:-10℃-+180℃,25℃-+220℃ Ambient temperature:-10℃-+80℃ Control Type:Normally closed,Normally open,Double acting

Double Acting DN15 1/2 inch Stainless Steel Pneumatic Water Steam Control Angle Seat Valve Description Body: SS304,SS316,SS316L Stem: SS304,SS316,SS316L Pneumatic actuators:PA, stainless steel Seats: PTFE Ends: Thread BSP, BSPT, NPT Pressure:16bar Air pilot pressure:0.6Mpa Size: 3/8″ – 4″ (10mm – 100mm) Ambient temperature: PA: -40 °C to + 60 °C ; stainless steel: -40 °C to + 80 °C Control medium:Neutral gases, air Temperature range: -40 °C to + 180 °C (depending on pressure,