Tungsten Carbide Wear Parts

Thin Wear Head For Oil Gas Industry Tungsten Carbide Wear Nozzles​ OD 36mm ID 34mm Height 15mm Application: for the Oil Gas industry wear nozzles. OED can produce various types of carbide wear parts, including valve fittings, various stem seats with internal threads, external threads, etc. A variety of finely polished parts can be machined. Carbide grades with cobalt or nickel are available. Corrosion-resistant grades Grade ISO Grade Ni Density Hardness T.R.S. Grain size ON10

Tungsten Carbide Wear Rings For Oil Gas Wear Parts Carbide Protection Rings Material: YG6, Co 6% Hardness: HRA 91.5 TRS; 1600 Outer diameter 32mm Inner Diameter 30mm Height 8mm Carbide wear ring/bush as protection wear parts in well drlling. Compared with silicon carbide rings, cemented carbide rings have more stable chemical properties such as good wear resistance, high thermal conductivity, low friction coefficient, small expansion coefficient, acid resistance, alkali

Tungsten Carbide Oil Gas Wear Parts Precision Carbide Rings In Oil Field OED offer a wide range of custom-sized alloy rings, from blanks to precision sizes. Carbide has high hardness, high wear resistance and corrosion resistance, compared to silicon carbide wear resistance is higher, so widely used in oil fields, mines, exploration and other high temperature and high pressure environment, Carbide wear parts for oil and gas industry, wellhead assembly, such as multi­stage

T.C. 616 All Ground Bush Scissors Wear Parts OG20 HRA 89 Polished Bushings​ Polished inner diameter and precision in dimensions. Good wear-resistance performance T.C bush as scissors part. Item No. 616 finished ground scissor wear bushingOuter diameter 12mmInner diameter 8mmThickness 9mmPerpendicularity 0.02mmCircularity 0.02mm All surface Ra 0.4 Carbide Grade OG20Chemical Component (Wt/Wt %)Co 11WC 89Other Physical PerformanceDensity(g/cm3)ISO336914.45±0.05Hardness

Carbide Cage For Oil Gas Parts Tungsten Carbide Wear Parts For Oil Field Carbide has high hardness, high wear resistance and corrosion resistance, compared to silicon carbide wear resistance is higher, so widely used in oil fields, mines, exploration and other high temperature and high pressure environment, Recommened carbide grades for Oil/Gas wear parts: Cobalt Binder Grades Grade Binder (Wt %) Density (g/cm3) Hardness (HRA) TRS (≥N/mm²) YG6 6 14.8 90 1520 YG6X 6 14.9 91

Non-Magnetic 9% Nickel Tungsten Carbide ON40 Position Pin Nickel Wear Parts With Nickel as the binder, the tungsten carbide could be more corrosion-resistance and get non-magnetic performance. This position pin is made of 9% Nickel as the binder, it has high transverse rupture strength and also high wear-resistance performance. General Dimensions: Outer diameter 8mm/6mm Length 40mm Perpendicularity 0.05mm Circularity 0.05mm Surface roughness Ra 0.4, polished Remove all sharp

Carbide Wear Resistance Punching Head For Oil Gas Wear Parts Carbide Mould​ It is often used in the water pumps, oil pumps, and other pumps, especially used for high pressure or corrosion resistance pumps. Flow restrictors, servo seats, and other sealing components need tungsten carbide bushings. Material: YG20, Co 20% Hardness: HRA 90.1 TRS; 3800 Outer diameter 72mm Height 25mm Compared with silicon carbide rings, cemented carbide rings have more stable chemical properties

Oil Gas Industries Carbide Spray Nozzles Thread Carbide Wear Parts​ Carbide nozzles are mainly used for PDC drills and roller cone drills, and under high pressure, vibration, mortar and other working conditions, drilling fluid is used to flush, cool and lubricate the tip of the bit to clean up borehole debris. Oil and gas exploration. Recommened carbide grades for Oil/Gas wear parts: Cobalt Binder Grades Grade Binder (Wt %) Density (g/cm3) Hardness (HRA) TRS (≥N/mm²) YG6 6 14

Cermet Carbide Roller Corrosion Resistance Rollers Tic-Fe Roller For Steel Wires​ OD 56mm ID 30mm Height 40mm Parallelism 0.02 Roughness Ra 0.8 Run-out 0.05 Application: for the steel wire rollers. Used in steel rollers, it has high requirements for temperature and oxidation resistance. In an extremely high-temperature environment must work continuously, and its weight is much lighter than cemented carbide, which can effectively reduce the load of the bearing. Material

Wear Resistant Carbide Spare Parts For Joint Parts HRA 91.5 Wear-resistant fittings for mechanical parts. OED can produce a variety of special carbide wear parts according to the drawings you need. Whether it's a blank product or a precision polished part Recommended carbide grades Wear part grades Grade ISO Grade Co Density Hardness T.R.S. Grain size OK05UF K05 6.00 14.90 93.20 3000 Ultra Fine OK10F K10-K20 6.00 14.90 92.00 2000 Middle/Fine OK30M K30 8.00 14.80 91.50 2200

YN11 No-Magnetic Wear Rings Finished Polished Carbide Precision Protect Rings​ No-Magnetic Wear rings Outer diameter 36 +0.05 Inner 32 -0.005 Height 11 +0.2 Carbide Material YN11 Nickel 11% Density 13.8g/cm3 HRA 88 Corrosion resistance carbide wear rings with polished inner diameter. Grade recommended: Wear part grades Grade ISO Grade Co Density Hardness T.R.S. Grain size OK05UF K05 6.00 14.90 93.20 3000 Ultra Fine OK10F K10-K20 6.00 14.90 92.00 2000 Middle/Fine OK30M K30 8

G40 Tungsten Carbide Rollers With High Impact Resistance Performance HRA 88​ Solid carbide rolls have been widely used in pre-finishing and finishing stands for high-speed wire rod mills (including fixed reduction racks, pinch roll stands). General Dimensions: Outer diameter 35mm Thickness 15mm Perpendicularity 0.05mm Circularity 0.05mm Surface roughness Ra 0.8, Ground Features: Good Wear Resistance Strong Impact Resistance Better Surface Finish Remove all sharp edges.

OK40F Polished Tungsten Carbide Rod With M6 Thread Detector Rods HRA 91.9​ Polished carbide detector rods with thread M6. General Dimensions: Outer diameter 6mm Length 40mm Ball size 8mm Perpendicularity 0.02mm Circularity 0.02mm Thread M6 Remove all sharp edges. It is used for testing the equipment detector head. All surface Ra 0.2 Carbide Grade OK40F Wear part grades Grade ISO Grade Co Density Hardness HRA T.R.S. Grain size OK01UF K01-K05 3.00 15.10 93.50 2000 Ultra Fine

T.C. 616 All Ground Bush Scissors Wear Parts OG20 HRA 89 Polished Bushings​ Perpendicularity and Circularity are 0.005mm. With these excellent quality, it used for precision scissors wear bushings. Item No. is not specified, with finished ground Ra 0.4Outer diameter 10mmInner diameter 8mmThickness 12mmPerpendicularity 0.005mmCircularity 0.005mm One end with 45° chamfer. Remove all sharp edges. All surface Ra 0.4 Carbide Grade OG20Chemical Component (Wt/Wt %)Co 11WC 89Other

OG20 Tungsten Carbide Bushings For Scissors Wear Parts HRA 89 T.C. Bush Ground Good wear-resistance performance T.C bush as scissors part. Item No. 690Outer diameter 13mmInner diameter 5mmThickness 6.7mm All surface Ra 0.8Carbide Grade OG20 Chemical Component (Wt/Wt %)Co 11WC 89Other Physical PerformanceDensity(g/cm3)ISO336914.45±0.05Hardness HV30ISO38781150±50 (HRA 87.5±0.3)4πσ(μTm3/kg) HC(KA/m)ISO332610.4±2.5*TRS(N/mm2)ISO3327＞2400Compressive strength N/mm² 4200 Micro

High Hardness Wear Resistant Carbide Seat For Mechanical Parts OED can produce a variety of special carbide wear parts according to the drawings you need. Whether it's a blank product or a precision polished part Tungsten carbide wear parts Bushes Guide rollers for steel Seal rings Valve parts, such as balls, seats, cage Thread nozzles Sector plates Tungsten carbide tools for metalworking: Circular knives Curving tools Milling tools Punching tools Scraps tools Shear blades

K20 Dental Surgical Operation Serration Plate 100 Pitch Carbide Wear Plates Application for dental surgical pliers serration plates. It requires sharp and qualified tips. OED can produce both sintered tips and all ground tips serration plates. Dimension 20*8*0.2 The thickness could be 0.2-0.4

G50 Tungsten Carbide Wear Wheel High Hardness Rotation Spare Parts​ 15 Gears Carbide Wear wheels The largest OD 100mm ID 60 -0.1 Total Height 15 +0.2 Ground precision wear parts Material G50/YG25 Cobalt 25% Density 13.2g/cm3 HRA 87 Grade recommended: Wear part grades Grade ISO Grade Co Density Hardness T.R.S. Grain size OK05UF K05 6.00 14.90 93.20 3000 Ultra Fine OK10F K10-K20 6.00 14.90 92.00 2000 Middle/Fine OK30M K30 8.00 14.80 91.50 2200 Fine OK40F K40 10.00 14.45 91.90

Conical Outside Diameter Bushes Dia 80mm Thin Protection Carbide Bushes​ Conical diameter wear bushes OD 80/80.2 ±0.1 ID 15 -0.1 Height 15 +0.2 Run-out 0.05 for both outer diameter and inner diameter Material YG11 Cobalt 11% Density 14.4g/cm3 HRA 90.5 Grade recommended: Wear part grades Grade ISO Grade Co Density Hardness T.R.S. Grain size OK05UF K05 6.00 14.90 93.20 3000 Ultra Fine OK10F K10-K20 6.00 14.90 92.00 2000 Middle/Fine OK30M K30 8.00 14.80 91.50 2200 Fine OK40F K40

G40 Carbide Wear Plates 20% Cobalt HRA 88 Carbide Special Plate​ Special wear carbide plate Length 160 +0.8 Width 15 +0.1 Height 25 +0.2 Material G40 Cobalt 20% Density 13.8g/cm3 HRA 88 Grade recommended: Wear part grades Grade ISO Grade Co Density Hardness T.R.S. Grain size OK05UF K05 6.00 14.90 93.20 3000 Ultra Fine OK10F K10-K20 6.00 14.90 92.00 2000 Middle/Fine OK30M K30 8.00 14.80 91.50 2200 Fine OK40F K40 10.00 14.45 91.90 3400 Middle/Fine OK50M K50 12.00 14.25 90.00