Sludge Dewatering Equipment

Sludge Dewatering Screw Press Dehydrator Machine Working Process 1. Thickening: When the screw drive shaft rotates, the multiple solid and active laminations arranged on the periphery of the drive shaft move relative to each other. Under the action of gravity, water is filtered out of the relatively moving lamination gap to achieve rapid concentration. 2. Dewatering: The concentrated sludge moves forward with the rotation of the screw shaft; along the direction of the mud

Multidisc Screw Press Sludge Compactor Dewatering Equipment For Industrial Waste Water Treatment Product Introduction Biocell volute screw press sludge dehydratering machine which uses the screw extrusion priciple is a new type of solide-liquid separation device. It reaches the goal of extrusion dewatering sludge by the powerful extrusion pressure of changing the screw diameter and distance along with the tiny spacing between moveable and fixed annular plates. Parameters

Multidisk Sludge Dewatering Equipment For Sedimentation And Activated Sludge Treatment Advantages Fine workmanship, beautiful products, full body stainless steel, frosting process, attention to detail, industrial grade artwork. Parameters Model DS Standard Capacity(kg/h) Sludge Treatment Capacity(m³/h) Low Concentration High Concentration 2000mg/L 4000mg/L 10000mg/L 20000mg/L 25000mg/L 50000mg/L MDS101 3 6 1.5 0.75 0.6 0.3 0.24 0.12 MDS131 6 12 3 1.5 1.2 0.6 0.48 0.24 MDS132

Sludge Dewatering Equipmen For Waste Activated Sludge Working Process 1. Thickening: When the screw drive shaft rotates, the multiple solid and active laminations arranged on the periphery of the drive shaft move relative to each other. Under the action of gravity, water is filtered out of the relatively moving lamination gap to achieve rapid concentration. 2. Dewatering: The concentrated sludge moves forward with the rotation of the screw shaft; along the direction of the

Multidisk Sludge Dewatering Screw Press Machine For Sedimentation Andactivated Sludge Work Flow When the device is operated, the conditioned sludge flows into the flocculation tank and is pushed forwad the discharging end. With the gap between the thread of the shaft is getting more and more narrow, the pressure on the sludge is getting higher and higher. Then the water is separated from the sludge and flow out from the gap between the moving and fixed plate. The movement of

High Capacity Dewatering Multiple Screw Press Sludge Dehydrator Equipment For Treating Anaerobic Sludge Working Process 1. Thickening: When the screw drive shaft rotates, the multiple solid and active laminations arranged on the periphery of the drive shaft move relative to each other. Under the action of gravity, water is filtered out of the relatively moving lamination gap to achieve rapid concentration. 2. Dewatering: The concentrated sludge moves forward with the rotation

Stock Fast Dispatch Mobile Sludge Dewatering Press Device For Waste Water Treatment Parameters Model DS Standard Capacity(kg/h) Sludge Treatment Capacity(m³/h) Low Concentration High Concentration 2000mg/L 4000mg/L 10000mg/L 20000mg/L 25000mg/L 50000mg/L MDS101 3 6 1.5 0.75 0.6 0.3 0.24 0.12 MDS131 6 12 3 1.5 1.2 0.6 0.48 0.24 MDS132 12 24 6 3 2.4 1.2 0.96 0.48 MDS201 12 20 6 3 2 1 0.8 0.4 MDS202 24 40 12 6 4 2 1.6 0.8 MDS301 30 60 15 7.5 6 3 2.4 1.2 MDS302 60 120 30 15 12 6

High Capacity Dewatering Multiple Screw Press Sludge Dehydrator Equipment For Treating Anaerobic Sludge Working Process 1. Thickening: When the screw drive shaft rotates, the multiple solid and active laminations arranged on the periphery of the drive shaft move relative to each other. Under the action of gravity, water is filtered out of the relatively moving lamination gap to achieve rapid concentration. 2. Dewatering: The concentrated sludge moves forward with the rotation

Stock Fast Dispatch Mobile Sludge Dewatering Press Device For Waste Water Treatment Parameters Model DS Standard Capacity(kg/h) Sludge Treatment Capacity(m³/h) Low Concentration High Concentration 2000mg/L 4000mg/L 10000mg/L 20000mg/L 25000mg/L 50000mg/L MDS101 3 6 1.5 0.75 0.6 0.3 0.24 0.12 MDS131 6 12 3 1.5 1.2 0.6 0.48 0.24 MDS132 12 24 6 3 2.4 1.2 0.96 0.48 MDS201 12 20 6 3 2 1 0.8 0.4 MDS202 24 40 12 6 4 2 1.6 0.8 MDS301 30 60 15 7.5 6 3 2.4 1.2 MDS302 60 120 30 15 12 6

Multidisk Sludge Dewatering Screw Press Machine For Sedimentation Andactivated Sludge Work Flow When the device is operated, the conditioned sludge flows into the flocculation tank and is pushed forwad the discharging end. With the gap between the thread of the shaft is getting more and more narrow, the pressure on the sludge is getting higher and higher. Then the water is separated from the sludge and flow out from the gap between the moving and fixed plate. The movement of

Sludge Dewatering Equipmen For Waste Activated Sludge Working Process 1. Thickening: When the screw drive shaft rotates, the multiple solid and active laminations arranged on the periphery of the drive shaft move relative to each other. Under the action of gravity, water is filtered out of the relatively moving lamination gap to achieve rapid concentration. 2. Dewatering: The concentrated sludge moves forward with the rotation of the screw shaft; along the direction of the

Multidisk Sludge Dewatering Equipment For Sedimentation And Activated Sludge Treatment Advantages Fine workmanship, beautiful products, full body stainless steel, frosting process, attention to detail, industrial grade artwork. Parameters Model DS Standard Capacity(kg/h) Sludge Treatment Capacity(m³/h) Low Concentration High Concentration 2000mg/L 4000mg/L 10000mg/L 20000mg/L 25000mg/L 50000mg/L MDS101 3 6 1.5 0.75 0.6 0.3 0.24 0.12 MDS131 6 12 3 1.5 1.2 0.6 0.48 0.24 MDS132

Multidisk Sludge Dewatering Equipment For Sedimentation And Activated Sludge Treatment Advantages Fine workmanship, beautiful products, full body stainless steel, frosting process, attention to detail, industrial grade artwork. Parameters Model DS Standard Capacity(kg/h) Sludge Treatment Capacity(m³/h) Low Concentration High Concentration 2000mg/L 4000mg/L 10000mg/L 20000mg/L 25000mg/L 50000mg/L MDS101 3 6 1.5 0.75 0.6 0.3 0.24 0.12 MDS131 6 12 3 1.5 1.2 0.6 0.48 0.24 MDS132

Sludge Dewatering Equipmen For Waste Activated Sludge Working Process 1. Thickening: When the screw drive shaft rotates, the multiple solid and active laminations arranged on the periphery of the drive shaft move relative to each other. Under the action of gravity, water is filtered out of the relatively moving lamination gap to achieve rapid concentration. 2. Dewatering: The concentrated sludge moves forward with the rotation of the screw shaft; along the direction of the

Multidisk Sludge Dewatering Screw Press Machine For Sedimentation Andactivated Sludge Work Flow When the device is operated, the conditioned sludge flows into the flocculation tank and is pushed forwad the discharging end. With the gap between the thread of the shaft is getting more and more narrow, the pressure on the sludge is getting higher and higher. Then the water is separated from the sludge and flow out from the gap between the moving and fixed plate. The movement of

Stock Fast Dispatch Mobile Sludge Dewatering Press Device For Waste Water Treatment Parameters Model DS Standard Capacity(kg/h) Sludge Treatment Capacity(m³/h) Low Concentration High Concentration 2000mg/L 4000mg/L 10000mg/L 20000mg/L 25000mg/L 50000mg/L MDS101 3 6 1.5 0.75 0.6 0.3 0.24 0.12 MDS131 6 12 3 1.5 1.2 0.6 0.48 0.24 MDS132 12 24 6 3 2.4 1.2 0.96 0.48 MDS201 12 20 6 3 2 1 0.8 0.4 MDS202 24 40 12 6 4 2 1.6 0.8 MDS301 30 60 15 7.5 6 3 2.4 1.2 MDS302 60 120 30 15 12 6

High Capacity Dewatering Multiple Screw Press Sludge Dehydrator Equipment For Treating Anaerobic Sludge Working Process 1. Thickening: When the screw drive shaft rotates, the multiple solid and active laminations arranged on the periphery of the drive shaft move relative to each other. Under the action of gravity, water is filtered out of the relatively moving lamination gap to achieve rapid concentration. 2. Dewatering: The concentrated sludge moves forward with the rotation

Sludge Dewatering Screw Press Dehydrator Machine Working Process 1. Thickening: When the screw drive shaft rotates, the multiple solid and active laminations arranged on the periphery of the drive shaft move relative to each other. Under the action of gravity, water is filtered out of the relatively moving lamination gap to achieve rapid concentration. 2. Dewatering: The concentrated sludge moves forward with the rotation of the screw shaft; along the direction of the mud

No Blocking Multi Plate Type Sludge Dewatering Equipment For Treating Activated Sludge Product Description Multi-plate Screw Press, which in controlled by the electric control cabinet, allows automatic continuous operation of sludge floccutation, thickening, dewatering and the filtrate discharging. The traditional dewatering equipment are easily got blocked. Due to the movement of fixed rings and moving rings, multi-plate Screw Press allows continuous operation in 24 hours

No Clogging Volute Type Sludge Dewatering Screw Press Machine For Algae Sludge Dewatering Introduction When the device is operated, the conditioned sludge flows into the flocculation tank and is pushed forwad the discharging end. With the gap between the thread of the shaft is getting more and more narrow, the pressure on the sludge is getting higher and higher. Then the water is separated from the sludge and flow out from the gap between the moving and fixed plate. The