IMU Accelerometer Gyro

Tactical Grade 3 Axis MEMS Gyroscope 0.15°/h ARW for Inertial Navigation Composition and Function The micro gyroscope assembly consists of a three-axis gyroscope, temperature sensor, signal processing board, structure, and necessary software. It measures two/three axis angular rates of a carrier and outputs compensated angular rate data (including temperature compensation, installation misalignment angle compensation, and nonlinear compensation) through an RS-422 serial port

Low Drift Inertial Measurement Unit Sensor Product Description The GI200F-A0-IMU is an inertial measurement unit (IMU) based on micromachining technology (MEMS), with built-in high-performance MEMS gyroscope and MEMS accelerometer, outputting 3 angular velocities and 3 accelerations. Main Functions Three-axis digital gyroscope: ± 500º/s dynamic measuring range; Zero bias stability: 10 °/H (GJB, 10s), 2.0 °/H (ALLAN); Triaxial digital accelerometer: ± 16g dynamic measuring

Low bias IMU 500deg/S Range Inertial Measurement Units Product Description GI200H-A0-IMU is an inertial measurement unit (IMU) based on micro-mechanical technology (MEMS), with built-in high-performance MEMS gyroscope and MEMS accelerometer, outputting 3 angular velocities and 3 accelerations. Main Features 1)Three-axis digital gyroscope: ± 500º/s dynamic measuring range; Zero-bias stability: 3 °/h (GJB, 10s), 0.6 °/h (ALLAN); 2)Triaxial digital accelerometer: ±16g dynamic

IMU Accelerometer Gyro Inertial Measurement Product Description The GI200-BO (AO) -IMU is an inertial measurement unit (IMU) based on micromachining technology (MEMS), with built-in high-performance MEMS gyroscope and MEMS accelerometer, outputting 3 angular velocities and 3 accelerations. The GI200-A0 (B0) -IMU is available in A0 (low configuration) and B0 (high configuration) versions. Main Features Three-axis digital gyroscope: ± 2000º/s dynamic measurement range; A0 bias

Anti-interference Three Axis IMU Gyro for Inertial navigation Product Description The GI200-A0 (B0) -IMU is an inertial measurement unit (IMU) based on micromachining technology (MEMS), with built-in high-performance MEMS gyroscope and MEMS accelerometer, outputting 3 angular velocities and 3 accelerations. . The GI200-A0 (B0) -IMU is available in A0 (low configuration) and B0 (high configuration) versions. Main Features Three-axis digital gyroscope: ± 2000º/s dynamic

Analog Devices ADIS16488 Tactical-Grade IMU for Precision Navigation System The ADIS16488HA is a compact MEMS IMU integrating a three-axis gyroscope and accelerometer, capable of measuring ±450°/s and ±20 g, with 0.3°/h gyro zero-bias instability and 0.25 mg accelerometer bias. This tactical-grade IMU features low random walk and high scale factor linearity for precise inertial sensing. Full compensation for temperature (-45~85 °C), misalignment, and nonlinear errors ensures

9-Axis MEMS IMU 0.3°/h Gyro Bias for Drone Flight Control & GNSS-Denied Navigation The ADIS16488HA is a compact, lightweight MEMS IMU featuring a three-axis gyroscope and accelerometer, with measurement ranges of ±450°/s angular rate and ±20 g acceleration. With exceptional zero-bias instability of 0.3°/h for the gyro and 0.25 mg for the accelerometer, this unit delivers minimal random walk and 100-500 ppm scale factor linearity. Advanced temperature, misalignment, and

MG3-1A MEMS Gyroscope Angular Velocity Sensor with 0.3°/h Bias The MG3-1A MEMS Gyroscope delivers high-precision 3-axis angular rate measurements for UAVs, robotic platforms, and autonomous navigation systems . It integrates a complete solution including: 3-axis MEMS gyroscope Temperature sensor Signal processing board Structural frame Dedicated software Features RS-422 output with full error compensation. Key specifications include ±400°/s range, zero-bias instability 0.3 °

MEMS 3-Axis Gyroscope with Real-Time Angular Rate Output The MG3-1A MEMS Gyroscope provides accurate and stable 3-axis angular rate measurements for UAVs, autonomous navigation systems, and robotic stabilization . This integrated solution includes a 3-axis MEMS gyroscope, temperature sensor, signal processing board, structural frame, and dedicated software with RS-422 output and full error compensation (temperature, misalignment, nonlinearity). Key specifications: ±400°/s

High Accuracy 0.3°/h Inertial Measurement Unit for AGV Platform The 16488HA is a high-precision MEMS IMU featuring integrated three-axis gyroscope and accelerometer. It delivers ±450°/s angular rate and ±20g acceleration measurements with exceptional accuracy. Key specifications include 0.3°/h gyro zero-bias instability, 0.25mg accelerometer bias, low random walk, and high scale factor linearity. With full temperature compensation (-45~85°C), misalignment correction, and

STIM300 Analog IMU Low Cost IMU Sensor Product indicators Parameter Test conditions Design accuracy Unit Gyro Dynamic measuring range - ±500 º/s Bias stability Allan variance (500 °/s range, normal temperature) 0.3 º/h 10 s average (-40 ℃ ~ + 80 ℃, constant temperature), 3.0 º/h Bias Zero-bias range 0.1 º/s Zero-bias variation over full temperature range 0.01 º/s Start repeatability 0.005 º/s Effect of linear acceleration on bias 0.002 º/s/g Influence of vibration on Bias,

16g Acceleration Gyro IMU Low Offset IMU Sensor Product features Three-axis digital gyroscope: ± 500º/s dynamic measuring range; Zero-bias stability: 3 °/H (GJB, 10s), 0.3 °/H (ALLAN); Triaxial digital accelerometer: ± 16 G dynamic measuring range; Zero-bias stability: 0.1mg (GJB, 10S), 0.02mg (ALLAN); High reliability: MTBF > 20000h; Guaranteed accuracy within the full temperature range (-40 ℃ ~ 80 ℃): built-in high-performance temperature calibration and compensation

6 Axis Gyro Accelerometer High Accuracy Inertial Measure Sensor Product features Three-axis digital gyroscope: ± 500º/s dynamic measuring range; Zero-bias stability: 3 °/H (GJB, 10s), 0.3 °/H (ALLAN); Triaxial digital accelerometer: ± 16 G dynamic measuring range; Zero-bias stability: 0.1mg (GJB, 10S), 0.02mg (ALLAN); High reliability: MTBF > 20000h; Guaranteed accuracy within the full temperature range (-40 ℃ ~ 80 ℃): built-in high-performance temperature calibration and

500deg Gyro 16g Accelerometer IMU Low Offset Inertial Measure Sensor Product features Three-axis digital gyroscope: ± 500º/s dynamic measuring range; Zero-bias stability: 3 °/H (GJB, 10s), 0.3 °/H (ALLAN); Triaxial digital accelerometer: ± 16 G dynamic measuring range; Zero-bias stability: 0.1mg (GJB, 10S), 0.02mg (ALLAN); High reliability: MTBF > 20000h; Guaranteed accuracy within the full temperature range (-40 ℃ ~ 80 ℃): built-in high-performance temperature calibration

Three-Axis Digital Gyroscope 500deg/S Range 0.3deg/H Bias Product indicators Parameter Test conditions Design accuracy Unit Gyro Dynamic measuring range - ±500 º/s Bias stability Allan variance (500 °/s range, normal temperature) 0.3 º/h 10 s average (-40 ℃ ~ + 80 ℃, constant temperature), 3.0 º/h Bias Zero-bias range 0.1 º/s Zero-bias variation over full temperature range 0.01 º/s Start repeatability 0.005 º/s Effect of linear acceleration on bias 0.002 º/s/g Influence of

Inertial Measurement Unit (IMU) Based On Micromachining Technology (MEMS) 1. Product overview The IMU300C-A0-IMU is an inertial measurement unit (IMU) based on micromachining technology (MEMS), with built-in high-performance MEMS gyroscope and MEMS accelerometer, outputting 3 angular velocities and 3 accelerations. 2. Product features Three-axis digital gyroscope: ± 500º/s dynamic measuring range; Zero-bias stability: 3 °/H (GJB, 10s), 0.3 °/H (ALLAN); Triaxial digital

Miniature ADIS16488 MEMS Inertial Measurement Unit Sensor with SPI Output The 16488HA is a high-performance MEMS inertial measurement unit that combines a three-axis gyroscope and three-axis accelerometer to deliver precise angular rate and acceleration data. With measurement ranges up to ±450°/s and ±20 g, featuring 0.3°/h gyro zero-bias instability and 0.25 mg accelerometer bias, this unit ensures exceptional accuracy for inertial navigation applications. The sensor

HG4930 MEMS Inertial Measurement Unit with 3 Axis Gyroscope & Accelerometer The HG4930 MEMS Inertial Measurement Unit is a compact, rugged six-axis sensor with integrated gyroscope and accelerometer. It outputs fully compensated angular rate, acceleration, and tilt over RS-422, including temperature and alignment corrections. Featuring ±200°/s gyro, ±30 g accelerometer, low random walk, and operation from -45°C to 85°C, it is ideal for UAVs, robotics, aerospace, defense, and

ADIS16488 Tactical Grade 9-Axis Inertial Measurement Unit for Mining Machinery The ADIS16488HA MEMS Inertial Measurement Unit delivers high-precision six-axis motion sensing with a three-axis gyroscope and accelerometer, featuring ±450°/s and ±20 g measurement ranges. With exceptional 0.3°/h gyro zero-bias instability and 0.25 mg accelerometer bias, this unit includes onboard compensation for temperature (-45~85 °C), misalignment, and nonlinearities. Its SPI communication (8

High-Performance MEMS 3-Axis Gyro with Low Noise RS422 Output The MG3-1A MEMS Gyroscope is a high-accuracy 3-axis angular rate sensor designed for autonomous vehicles, UAV navigation, and robotics applications . Featuring MEMS gyroscope technology, temperature sensors, signal processing board, structural framework, and software , it outputs fully compensated angular rate data via RS-422 , including temperature, alignment, and nonlinearity correction . Key specifications: ±400