Permanent Magnet Stepper Motor

M3*P0.5 Lead Screw 18°/step PM Linear Stepper Motor for Precise Control VSM1519-M3 $1.5~$5/Unit Description: This is a 15mm permanent magnet stepper motor with M3 lead screw on top. Lead screw length is customizable, we can adjust lead screw length based on customer’s space and travel distance requirement. We do not provide nuts, customers please match lead screw nut themselves. M3*P0.5 is very commonly used, and it is easy to find a nut to match. For other parts, such as

Product Description: Permanent Magnet Stepper Motor is a high torque stepper motor that is widely used in various applications. It is a PM stepper motor with a 35mm motor diameter and a model number of 35BYJ46. It has a rated voltage of 12V DC and a step angle of 7.5°/85. It also has a pull-in torque of ≥98mNm. This micro geared stepper motor is suitable for a wide range of applications and is easy to operate. It provides high torque and low noise operation, making it an

35mm 7.5°/85 High Accuracy High Torque Permanent Magnet Stepper Motor Product Description: Permanent Magnet Stepper Motor Permanent Magnet Stepper Motor is a kind of gearbox PM Stepper Motor, with a rated voltage of 12V DC, a step angle of 7.5°/85, a motor diameter of 35mm and model no. 35BYJ46. It consists of a permanent magnet electric motor, which converts electrical pulse into angular displacement. Permanent Magnet Stepper Motor offers high torque at low speed and lower

VSM0620 Permanent Magnet Stepper Motor 4 Bare Pins D Shaft 5V DC 18° Angle 4 Pins Description: This stepper motor (VSM0620) is 6mm diameter, and it has about 1.2 g*cm of pull-out torque. Due to the small size, it has very limited torque. This motor has D output shaft, and we can also make it round shaft if customers require it. The motor comes with naked pins. (4 pins) It does not have a FPC or PCB board. We can design a FPC or PCB if customer want something more convenient

Micro VSM0620 6mm diameter 4 bare pins D shaft 5V DC 18° angle stepper motor Description: This stepper motor (VSM0620) is 6mm diameter, and it has about 1.2 g*cm of pull-out torque. Due to the small size, it has very limited torque. This motor has D output shaft, and we can also make it round shaft if customers require it. The motor comes with naked pins. (4 pins) It does not have a FPC or PCB board. We can design a FPC or PCB if customer want something more convenient to

High Precision 7.5 Degree 12V DC 5 Wire Permanent Magnet Stepper Motor Cover hole distance (mm): can be customized Reduction ratio: 1:85 Step angle: 7.5°/85 Drive mode: 1-2 phase excitation or 2-2 phase excitation Lead Specifications: ul1061 26awg or ul2464 26awg Rated voltage: 5VDC; 12VDC; 24VDC This product is mainly used for sanitary ware, thermostatic valve, hot water faucet, automatic adjustment of water temperature and water flow, etc. At the same time, it can also

12V 5-wire high precision 7.5 degree permanent magnet stepper motor 30mm micro stepper motor Hole spacing of cover plate (mm): customizable Reduction ratio: 1 / 85.25 Step angle: 7.5 ° / 85.25 Driving mode: 1-2-phase excitation or 2-2-phase excitation Lead specification: ul1061 26awg or ul2464 26awg Rated voltage: 5VDC; 12VDC; 24VDCThis product is mainly used for sanitary ware, thermostatic valve, hot water faucet, automatic adjustment of water temperature and water flow, etc

Customized M1.7*P0.3 lead screw linear 8mm diameter 5V permanent magnet PM stepper motor Description: This is 8mm diameter PM stepper motor with lead screw on top. Lead screw type is M1.7*P0.3 M1.7*P0.3 is very uncommonly used lead screw, because this motor was developed for a specific project. Also it might be hard for customers to find a nut to match this lead screw. So we also provide customization service to customize the shaft into M2*P0.4 for example. Motor parameters:

SM35-048 35mm PM stepper motor SM35-048-372 is a micro stepping motor with an outer diameter of 35mm. This model is only a typical product. There are many choices according to the thickness of the motor, step angle, assembly method, etc., and can also be customized according to customer requirements. The basic step angle of this type of motor is 7.5 degrees (15 degrees are optional), and under the condition of full-step driving, each revolution requires 48 steps. If it is

VSM1519-M3 15mm lead screw adjustable lead screw length PM linear stepper motor Description: This is a 15mm permanent magnet stepper motor with M3 lead screw on top. Lead screw length is customizable, we can adjust lead screw length based on customer’s space and travel distance requirement. We do not provide nuts, customers please match lead screw nut themselves. M3*P0.5 is very commonly used, and it is easy to find a nut to match. For other parts, such as cable length, and

20BY45-67 PM permanent magnet 9 Ohm 20mm 18° step angle stepper motor for gearbox Description: This 20BY45-67 motor is our 20 mm permanent magnet PM stepper motor. Motor’s coil resistance is 9Ω/phase, and it’s designed for low driving voltage (around 5V DC). If customers want to drive the motor at higher voltage, we can adjust coil resistance to match it. Also there are two M2 screws on motor’s cap, and they are used for fixing with gearbox. Customers can also use screws to