Flammability Testing Equipment

5KW Building Materials Surface Burning Characteristics Testing Equipment​​ Application: This method is applicable to determine surface burning characteristics of building materials and flame propagation rate of exposed surfaces such as walls and ceilings (including solid plastics), at the same time measure smoke density. This test method applies to the exposed surface which includes ceiling or walls, provided that the materials or the whole assembly, with its own structural

NBS Smoke Density Test Chamber ASTM E662 SUS 304 Stainless Steel Description: ISO 5659-2 Plastics Smoke Generation Optical Density Test Apparatus by Single Chamber Test is widely used in assessing characteristics of vehicle interior and inflammable cable. Measure the optical density of smoke when a certain thick specimen is exposed to a heat source of 50KW/m2. Standards: ISO 5659-2 Plastic smoke generation, determination of optical density by a single chamber test GB/T 8323.2

50l/S Low-Smoke Vacuum Cleaners Smoke Toxicity Index Test Chamber Description: This tester measures the Toxicity Index by ppm in Naval Engineering Standard chamber when complete combustion occurs by burner. NES 713 TOXIC Chamber meets the standard of NES 713 and is used to measure combustion characteristics about materials. NES 713 Toxic Chamber measures Toxicity Index after perfect combustion by burning 100g of specimen. Standard: NES 713: Determination Of the Toxicity Index

GB8746 Vertical Textile Flammability Resistence Tester SUS 304 Stainless Steel Description: This textile flammability tester machine is used to test the flame spread performance of single-or multi-component (coating, quilted, multi-layered, laminated products and similar combinations) including clothing, curtains, draperies and large tent awning and door cover textile at vertical condition. Standards: GB/T 5456,8746,BS EN ISO 6940,6941, EN ISO 15025,BS 5438 Main Parameters:

Electrical Products LDQ Dielectric Brass Flammability Test Equipment Description: In the electrical products under the influence of moisture and impurity environment , live parts with different polarities between the live parts and ground metal may cause insulation on the leakage, the arc caused by electrical short-circuit or due to the discharge of the material Electric corrosion damage, or even ignite lead to fire. The tracking test is a destructive test of the insulation

ASTM E 846 Flooring Radiant Heat Flux Test Apparatus Testing Machine 400-600 ℃ Description: This test method is used to measure the critical radiant flux of horizontally-mounted floor covering systems exposed to a flaming ignition source in a graded radiant heat environment, within a test chamber. It can also be used to measure this same critical radiant flux for exposed attic floor cellulose insulation.Suitable for all kinds of flooring materials. Such as: textile carpets,

UL94 Horizontal And Vertical Combustion Tester Temperature Accuracy ± 1 ℃ Description: UL-94 Flame Retardant Tester is used for the flammability testing of plastic materials such as V-0 V-1 V-2, HB, HF-1 HF-2, material or foam, and used in consumer electric devices and appliances for flammability rating assessment. Such as insulating housing of household appliances, switch panel, the printed circuit board and insulating material etc. Main specification: Test room: 0.85 m³

Safety Flammability Testing Equipment Burning Test Device For Motor Accessories Product introduction: Automotive interior accessories burning test device is based on the federal motor vehicle safety standards 302 in Europe, Canada and Japan, the equivalent of the standard is ISO3795. FMVSS 302 provides motor vehicle passengers. The compartment (such as passenger cars, multi-purpose passenger cars, trucks and buses etc.) require the use of flame retardant materials testing.

ASTM D2843 Building Materials Decomposition Burning Smoke Density Tester Application The touch screen computer dual-control smoke density tester for building materials is developed according to the technical conditions specified in the national standard GB/T8627-2007 "Smoke Density Test Method for the Burning or Decomposition of Building Materials". It is suitable for static burning of building materials and their products and other materials. Determination of smoke

UL94 Horizontal And Vertical Flame Tester Lab Testing Machine SUS 304 Summary: UL94 Horizontal-Vertical Flammability Tester is a fully automatic instrument contained in its own cabinet to maximize the safety of the operator. It screening procedure for comparing the relative burning behavior specimens made from plastic and other non-metallic materials, exposed to a flame ignition source of 50W or 500W nominal power. These test methods determine the linear burning rate and the

ISO9239-1 Fire Tester Critical Radiant Flux With A Radiant Heat Energy Source Description: ISO 9239 Radiant Flooring Panel test is the cornerstone of the flooring materials reaction to fire tests in the Euroclass system. The apparatus measures the spread of flame of the sample, under thermal exposure, using a radiant heat ignition source. The thermal exposure is that of a fire growing in the room of origin that through a door opening, radiates onto the floorings in an

ASTM D2843 Smoke Density Tester For Building Materials 0 ~ 100% Application: It is applicable to the determination of static smoke content when building materials and its products are burned. It can also be used for the determination of static smoke content when other solid materials are burned. Standard: Meets GB/T8627, ASTM D2843 standard requirements. Main technical parameters: Gas source95% propane gas, or gas of the same purity (customer-supplied)Burning lampThe length

GB / T8626-2007 Test Method of Flammability for Building Materials Description: Ignitability test, also called single-flame source test. Test apparatus corresponds to standard EN ISO 11925-2. Test results of the building structure can be classified according to standard 13501-1. The dimensions of the test specimens shall be (250 ) mm long by (90 ) mm wide. 45°-tilted burner is advanced horizontally until the flame (length 20 mm) reaches the pre-set contact point with the test

Flammability Tester Automatic Burning Tester Flammability Test Chamber Product introduction: Automotive interior accessories burning test device is based on the federal motor vehicle safety standards 302 in Europe, Canada and Japan, the equivalent of the standard is ISO3795. FMVSS 302 provides motor vehicle passengers. A combustible material is something that can burn (i.e., combust) in air. A combustible material is flammable if it ignites easily at ambient temperatures. In

UL94 Horizontal And Vertical Flame Tester Lab Testing Machine SUS 304 Summary: UL94 Horizontal-Vertical Flammability Tester is a fully automatic instrument contained in its own cabinet to maximize the safety of the operator. It screening procedure for comparing the relative burning behavior specimens made from plastic and other non-metallic materials, exposed to a flame ignition source of 50W or 500W nominal power. These test methods determine the linear burning rate and the

220V 50 / 60Hz Heat Transmission Index Tester Protective Suit Flame Spread Tester Description: A new term heat transfer index (HTI) has been introduced to avoid confusion with the thermal protective index (TPI) or other terms used in previous versions of this test. Heat transfer index is calculated from the mean time in seconds to achieve a temperature rise of 24±0.2℃when testing by this method using a copper disc and a starting temperature of 25±5℃. The heat transfer index

High Frequency Induction Heating Machine 15KW 30-100KHz Heat Melting Welding Quenching Annealing Brazing Metal Melting Main characteristics: What is Induction Heating? Induction heating can basically be considered as electromagnetic heating. In induction heating process, eddy currents are produced in the heated material using the electromagnetic induction principle and the heating of the material is carried out in a contactless manner. Hence, heating is much more efficient

UL94 Horizontal And Vertical Flammability Tester Electric Touch Screen Plastic Material Application: horizontal-vertical flame chamber tester is a fully automatic instrument contained in its own cabinet to maximize the safety of the operator. It screening procedure for comparing the relative burning behavior specimens made from plastic and other non-metallic materials, exposed to a flame ignition source of 50W or 500W nominal power. These test methods determine the linear

Digital Induction Heating Machine Induction Heater Manufacturer Heating Installation For AxleMain characteristics: What is Induction Heating? Induction heating can basically be considered as electromagnetic heating. In induction heating process, eddy currents are produced in the heated material using the electromagnetic induction principle and the heating of the material is carried out in a contactless manner. Hence, heating is much more efficient than traditional resistances

ASTM D4151 Automatic Flammability Testing Equipment 45 Degree For Textile Automatic Flammability Tester Application 45 Degree Automatic Flammability Tester is suitable for testing the performance of textiles in children's pajamas and pants, or in the hands of consumers or from consumers. Tests for the flammability of textiles used in the manufacture of garments, the introduction of three types of flammability, the determination of the classification of textiles, and the use