Furniture Testing Machine

Stainless Steel Temperature Oxygen Index Apparatus Flammability Testing Descriptions: Oxygen Index is, perhaps, the most economical and precise quality control test of combustible materials. Its ease of use, together with high levels of precision has made this technique a primary characterizing and quality control tool to the plastic and electric cable industries and it has been specified by several military and transport groups. The technique measures the minimum percentage

Furniture Handle Cycle Testing Equipment Thyristor Speed Regulation Control Descriptions: Salt spray test chamber adapted to the surface treatment of various materials, including paint, electroplating, organic and inorganic coating, anode processing, antirust oil and so on, after these anti-corrosive treatment to test the corrosion resistance of their products. Parameter: 1. Station: One station. 2. Control mode: thyristor speed regulation control. 3. Test Angle: set

Stainless Steel Flammability Tester For Customized Household Mattress Descriptions: Applicable to the evaluation of a mattress or mattress suite suffered ignition source similar to burning sheets when burning and heat release, 16 CFR 1633 U.S. federal standard, mattress and package all manufacturers and importers must conform to the standard. Features: A mattress or mattress placed on the top of the steel frame and combustion kit for the two of total calories for T 27KW type

Blanket Flammability Test Machine Big Combustion Chamber Furniture Testing Machine Descriptions: Blanket Flammability Tester is designed and developed based on ASTM D4151; Suitable for bedding, including bed sheets, blankets, mattress mattress, pillow, duvet, and similar products that used to cover on the bed of the flame retardant performance; This test method is use the standardize flame to burn the sample surface within the prescribed time, observing the combustion, degree

Building Materials Non-Combustibility Apparatus Furniture Testing Machine Descriptions: Non combustible of building materials can be measured by the non combustible test furnace of building materials. Material Science. Equipment can fully meet the international standards of GB/T 5464 and ISO 1182. Furnace at 750 Non - combustion performance of homogeneous and non - homogeneous building products under the condition of temperature. Features: 1. advanced industrial appearance

Toxicity Test Apparatus Textile Vetical Flame Tester Flammability Testing Descriptions: Mainly used in textiles and other materials, flame retardant properties of standard tests, used for the determination of the toxicity index of the products of combustion from small specimens of material. Features: 1, Integrated box design, with a transparent observation window 2, The United States HUMBOLDT ladder Ruir fire; flame combustion stability 3, Bunsen burner automatic control: a

Building Material Combustibility Stainless Steel Safety Furniture Testing Machine Descriptions: Applicable to the British building materials and high iron flame retardant test standard, conform to the standards , the method of the test to determine the classification of the surface spread of flame of products. BS 476-7 is mainly used for the determination of the extension of the flame which on the exposed surface of the wall and ceiling. The test method is through the gradual

Cable Flammability Tester Color Standard With Mass Flow Control Set Furniture Testing Machine Descriptions: Wire and Cable Fire-resistance Impact Tester is used to detect the fire resistance of cable wiring or power grid, burning in not less than 830 degrees, the flame, and exerts certain impact vibration, cable integrity test circuit. Features: 1. The heat source for the belt type propane burner nozzle, its nominal length is 500mm, equipped with Venturi mixer; 2. 3 rows of

Propagation Index Tester Building Materials And Structures Furniture Testing Machine Descriptions: Applicable to the British building materials and high iron flame retardant test standard, conform to the standards for BS 476-7, the method of the test to determine the classification of the surface spread of flame of products. BS 476-7 is mainly used for the determination of the extension of the flame which on the exposed surface of the wall and ceiling. The test method is

Standard Fire Testing Smoke Density Tester Flammability Test Equipment Descriptions: When a certain thickness of the test sample is placed in the heat source 25KW/ or 50KW/, when the box body is in the open fire, Smoke density test chamber can measure the smoke density. This instrument is suitable for E ASTM 662, BS6401, ISO5659, NES 711, NEPA258 and other standards. This test is more and more used for the internal material of vehicles. Testing of low power, non flammable

Bunched Cable Vertical Flammability Tester Furniture Testing Machine Descriptions: Bunched Cable Vertical Flame Spread Testing Machine is designed accordance with the relevant provisions of UL1685, GB18380.3 standard about wire and cable burning test requirements. And meet with IEC 60332-3-10, KS C IEC 60332-3-21 ~ 25 (A ~ Class D) standards. Bunched Cable Vertical Flame Spread Tester is an equipment which used to test the vertical installation of a bunched cable or optical

Furniture Testing Machine Propagation Index Tester For Building Materials And Structures Descriptions: BS 476-6 is a test method of measuring the flame propagation properties of materials, primarily for fire protection performance evaluation of the walls and ceilings, measurement results are expressed as an index of flame propagation. During the test, the specimen is exposed to the tubular torch, heat release of the lamp is 530J / S. 2 minutes and 45 seconds later, the two

Automobile Interior System Combustion Testing Machine Furniture Testing Machine Descriptions: This combustion testing machine is usually applied to auto (car,multipurpose passenger coach and truck) interior material's horizontal combustion characteristics. The sample was put horizontally on the U shape bracket, a small flame lighted at the sample free end for 15s in the combustion chamber. Record whether the flame extincted,or when it will extinct. And the sample burning

Flammability Test Equipment Fire Retardant Flammability Test Equipment Descriptions: The flammability test is a simulated safety test according to IEC 60950: 1999, UL 94, IEC 707, IEC 695-2-2, ISO 1210: 1992 and other standards. The flammability test is to use a certain size of the Bunsen burner (Bunsen burner) and a specific gas source (methane or natural gas), according to a certain flame height and a certain flame angle of the horizontal or vertical state of the sample

Vertical Wire-Flame Vertical Burning Cable Horizontal Furniture Testing Machine Descriptions: Cable horizontal and vertical burning test apparatus(VW-1)is designed according to UL1581 sect 1080.1~1080.14, and meet the criteria of VW-1(Vertical-specimen)Flame Test. It can be used to test of 1060 products wire and cable FT1 and vertical burning test,1080 VW-1 test, 1061 test, 1090 horizontal test and 1100 horizontal specimen or FT2 test;t o assess the flame spreading ability to

Smoke Density Test Machine For Building Material Furniture Testing Machine Descriptions: In a fire, people are often smoke suffocated or unable to escape because of the invisible road, so in the prevention of fires, smoke density of the test material is essential. Building materials smoke density Tester conforms to the national standard ASTM D2843 specification and requirements, can be used to measure and describe materials, products, components, response to heat and flame

Carbon Steel Oxygen Index Tester Standard Color High Accuracy Furnace Temperature Descriptions: The IEC 60754-1 & 2 measuring instrument measures the volume of halogenated gases by means of thermal radiation (IEC 60754-1: 800 ° C, IEC 60754-2: 950 ° c) emanating from wire and cable in tubular furnaces (IEC 60754- 1), PH concentration (pH meter, hydrogen ion, IEC 60754-2), electrical conductivity (IEC 60754-2) and so on. IEC 60754-1 & 2. Both the IEC 60754-1 standard and the

0.5Kva Flammability Test Equipment With Gas Round Mouth Bunsen Burner Descriptions: The flammability test is a simulated safety test according to IEC 60950: 1999, UL 94, IEC 707, IEC 695-2-2, ISO 1210: 1992 and other standards. The flammability test is to use a certain size of the Bunsen burner (Bunsen burner) and a specific gas source (methane or natural gas), according to a certain flame height and a certain flame angle of the horizontal or vertical state of the sample time

Solar Cell Spread of Flame & Burning Brand Test Machine Furniture Testing Machine Descriptions: Solar Cell Spread of Flame & Burning Brand Test Machine is based on UL 1730, IEC 61730-2 design and development. Is to simulate real conditions to assess roof and components of fire-resistant performance of the instrument, in A1.82m, b 2.4m and c 3.9m specimens to evaluate A~C level. Also can be used in fire-retardant performance of photovoltaic components used in this test.

Flammability Testing Vertical Wire-Flame Testing Machine Stainless Steel Materials Descriptions: Cable horizontal and vertical burning test apparatus(VW-1)is designed according to UL1581 sect 1080.1~1080.14, and meet the criteria of VW-1(Vertical-specimen)Flame Test. It can be used to test of 1060 products wire and cable FT1 and vertical burning test,1080 VW-1 test, 1061 test, 1090 horizontal test and 1100 horizontal specimen or FT2 test;to assess the flame spreading ability