Steel Grate Stair Treads

T3 Step Plate For Steel Structure Step Plate Corrosion-Resistant Galvanized T3 type steel ladder step plate is a kind of steel grating fixed by welding and with patterned front guard plate. The recommended width is 125, 155, 185, 215, 245, 275 and 305mm. When the width is 125mm, the spacing of flat steel is 30mm; Recommended width: 115, 155, 195, 235, 275, 315 mm, flat steel spacing: 40mm; The recommended width is 155, 215 and 275mm, and the spacing of flat steel is 60mm .

T1 Welded Fixing Without Nosing Stair Tread For Steel Ladder 30mm Bearing Bars Pitch Introduction to technical parameters of step plate grating The steel grating of this model adopts the welding fixed installation method. The center distance of the load flat steel is 30mm. For the flat steel with this center distance, the recommended step plate width is 125, 155, 185, 215, 245, 275 and 305 mm, and the center distance of the cross bar is 10cm. 30mm 30mm 30mm 30mm 30mm 30mm

Factory Direct Sales High bearing performance T1 Steel Grate Stair Treads Main performance of steel grate stair treads The steel grate stair treads is made of ordinary flat steel, and the ordinary flat steel covers the edge. It is not welded with pattern protection plate and anti-skid strip, and the side plate is added. The structure is simple. Welded on the steel beam during installation, Jane Single, economical and practical, this kind of stepping board is widely used by

Factory Direct Sales Hot Dip Galvanized Carbon Steel Grate Stair Treads Our company address is No. 88, C Area, North of Xingan Avenue, Chengnan Industrial Zone, Anping County, Hengshui City, Hebei Province ,China . Main performance of type T1 Steel grate stair treads : The installation of the TypeT1 steel Grate stair treads is very simple. The welded fixed interface is directly adopted. It is required to have good lighting performance in the plant. The relatively inexpensive

Factory Direct Sales Hot Dip Galvanizing T4 Steel Grate Stair Treads The address of our company is No. 88, C Area, North of Xingan Avenue, Chengnan Industrial Zone, Anping County, Hengshui City, Hebei Province ,China . Main performance of T4 steel Grate stair Treads; Steel Grate Stair Treads is a kind of metal fittings made of carbon steel surface after hot dip galvanized treatment using pressure welding is often used for stairs and steps chemical plants sewer coal mine its

Factory Direct Sales T3 Steel Grate Stair Treads 30mm Bearing Bar Pitch Main performance of steel ladder step plate grating T3 type steel ladder step steel grating is welded by bearing flat steel and cross bar, and then wrapped and welded with pattern front guard plate on one side. This type of steel ladder step steel grating is fixed by welding, which is suitable for permanent non removable steel ladder and is mostly used for equipment surrounding platforms.And It can be

Customized Silver White T1-T4 Steel Grate Stair Treads Bearing Bar Pitch Main performance of steel ladder step plate grating The installation of the step board is very simple. The welded fixed interface is directly adopted. It is required to have good lighting performance in the plant. The step board designed by this grid has very good ventilation and light transmission effect, high strength, light structure, corrosion resistance, no accumulation of rain and snow, durability

Factory Direct Sales Main performance of steel ladder step plate grating The installation of the step board is very simple. The welded fixed interface is directly adopted. It is required to have good lighting performance in the plant. The step board designed by this grid has very good ventilation and light transmission effect, high strength, light structure, corrosion resistance, no accumulation of rain and snow, durability

Factory Direct Sales Antiskid Serrated Corrosion Resistant Steel Grate Stair Treads The address of our company is No. 88, C Area, North of Xingan Avenue, Chengnan Industrial Zone, Anping County, Hengshui City, Hebei Province ,China .Have rich experience in import and export trade Is specialized in the production of steel metal garting and other wire mesh products manufacturers Looking forward to finding a trading partner! Main performance of steel ladder step plate grating

Product introduction of stainless steel ladder step board for workshop in chemical plant This T3 steel ladder step plate with welded fixed pattern front guard plate is made of stainless steel. The flat steel is constructed by pressing and locking horizontally and vertically, which is solid, strong load-bearing, light and beautiful structure and good corrosion resistance. Attribute table of

T2 Stair Tread Customized Bolt Fixing Type Of Steel Ladder Step Plate T2 steel ladder step plate is a kind of bolt fixed steel ladder step grating plate without front guard plate. Kaiheng steel grating manufacturer can design any type of steel grating according to the drawing requirements of customers. Generally, the common data model of step plate is: Recommended width (mm) T1-T6 125 155 185 215 245 275 305 Flat steel spacing 30 T1-T2 T5-T6 125 165 -- 205 245 285 325 Flat

T3 Welded Fixing Without Nosing Stair Tread For Steel Ladder 60mm Bearing Bars Pitch The introduction of stair tread for steel ladder of 60mm bearing bar pitch The step grid plate of T3 flat steel ladder with a spacing of 60mm is a step plate of welding fixed installation mode, which is suitable for permanent steel structure projects without disassembly. It adopts horizontal and vertical cross welding of flat steel and cross bar, with outer edge wrapped flat steel, and Huawei

T3 Welded Fixing Without Nosing Stair Tread For Steel Ladder 40mm Bearing Bars Pitch The introduction of bearing bars at 40mm pitch steel ladder stair tread T3 type steel ladder step steel grating is welded by bearing flat steel and cross bar, and then wrapped and welded with pattern front guard plate on one side. This type of steel ladder step steel grating is fixed by welding, which is suitable for permanent non removable steel ladder and is mostly used for equipment

T1 Welding And Fixing Non Front Guard And Non Slip Steel Ladder Step Plate Bearing Bar At 30mm Pitch Introduction to T-type tread plate of anti-skid steel ladder The step steel grating of this model is fixed by welding. The flat steel is of tooth shaped anti-skid type. The center distance of the load flat steel is 30mm. For the flat steel with this center distance, the recommended step plate width is 125, 155, 185, 215, 245, 275 and 305 mm, and the center distance of the

Overview of the steel ladder stepping plate Stair Treads, also known as steel stair treads, are a kind of stair slab for platforms. Their installation methods include welding connection and bolt connection. The welded fixed treads can be directly welded to the ladder beam. Model of steel ladder step plate Model:T1,T2,T3,T4,T5,T6 Welding fixing: T1, T3, T5 Bolted fixing: T2, T4, T6 The width of treads is usually between 0.5m and 1m. Tread plate marking and tolerance ST4 - ST4

T4 Type Stair Step Plate Silver White Load-Bearing Grid Plate The front step guard plate with T4 pattern is a kind of steel guard plate with T4 pattern. Q235 steel (supporting customization) is adopted for the step plate of steel ladder. The outer surface is hot-dip galvanized, and the width is usually between 0.5-1.0m. It is not easy to rust. As the step board of steel ladder, the selection of steel grating has the advantages of not easy to accumulate dust and no cleaning.

Anti Skid And Corrosion-Resistant Hot-Dip Galvanizing Of Steel Ladder Step Plate In Plant Product introduction of steel grating step plate The ladder is a kind of steel products with cross grid, which is also called "steel step", and is made of steel step with certain spacing. The surface of tread plate is generally treated with hot galvanizing or cold galvanizing. this product is the type of T1,but selected tooth shaped flat steel,It is a step board with anti-skid property .

T1 Welding And Fixing Non Front Guard And Non Slip Steel Ladder Step Plate Bearing Bar At 40mm Pitch The introduction of the T1 toothed ladder step grating plate The step steel grating of this model is fixed by welding. The center distance of the load flat steel is 40mm. For the flat steel with this center distance, the recommended step plate width is 125, 165, 205, 245, 285 and 325mm, and the center distance of the cross bar is 10cm. bearing bar pitch(mm) 40 40 40 40 40 40

T1 Welding And Fixing Non Front Guard And Non Slip Steel Ladder Step Plate Bearing Bar At 60mm Pitch The introduction of the T1 model steel ladder step grating plate The step steel grating of this model is fixed by welding. The center distance of the load flat steel is 60mm. For the flat steel with this center distance, the recommended step plate width is 185, 245 and 305 mm, and the center distance of the cross bar is 10cm. bearing bar pitch(mm) 60 60 60 grid stair tread

T3 Welded Fixing Without Nosing Stair Tread For Steel Ladder 30mm Bearing Bars Pitch T3 type steel ladder step steel grating is welded by bearing flat steel and cross bar, and then wrapped and welded with pattern front guard plate on one side. This type of steel ladder step steel grating is fixed by welding, which is suitable for permanent non removable steel ladder and is mostly used for equipment surrounding platforms. The welding method is to weld the first flat steel at