PLC Industrial Automation

NEW&ORIGINAL CJ2H-CPU68-EIP *100% REAL STOCK Omron CPU CJ2H for high speed, high capacity The CJ2H series is ideal for advanced machine automation needs, such as those required in image processing inspection of electrical components and high speed sorting on conveyors. Always accessible through standard USB support Standard Ethernet port with EtherNet/IP Data Link function High program capacity of up to 400K steps Higher precision for machine operation and processing quality

Mitsubishi PLC Programming Controller FX3U-32MR/ES-A In Stock Description Mitsubishi PLC FX3U-32MR/ES-A AC Base Unit FX3U32MRESA FX-Series Extended Product Type : FX-series Product ID: FX3U-32MR/ES: FX3U-32MR/ES Mitsubishi Type Designation : FX-series Description: PLC, FX3U Base Unit AC 100-240 V; 16 inputs DC 24 V; 16 relay outputs Features of Mitsubishi PLC AC Base Unit FX3U-32MR/ES-A Three memory cassettes that can be installed into the FX3U CPU, and when installed the

Sysmac CQM1-CPU21,PA206, OC222 PLC Omron Module Assembly The CQM1 is a compact, high-speed PC made up of a CPU Unit, Power Supply Unit, and I/O Units that together provide up to 256 total I/O points. These components lock together at the sides, allowing simple changes in the size and capacity of the PC. There are six types of CPU Unit, shown in the table below. All of the CPU Units except for the CQM1-CPU11-E have a built-in RS-232C interface. The CQM1 provides many advanced

OMRON PLC Twin Timer H3CR-F8 100-240V AC NEW IN BOX 6 month warranty H3CR-F Features: • Wide power supply ranges of High Voltage 100 to 240 VAC/100 to 125 VDC and Low Voltage 24 to 48 VAC/12 to 48 VDC. • ON- and OFF-times can be set independently and so combinations of long ON- or OFF-time and short OFF- or ONtime settings are possible. • Twenty-four time ranges from 0.05 s to 300 h depending on the model to be used. • Models with a flicker ON start or flicker OFF start are

Omron PLC Industrial Automation Equipment CPU Unit CJ2H-CPU64-EIP Product Features CJ2H for high speed, high capacity The CJ2H series is ideal for advanced machine automation needs, such as those required in image processing inspection of electrical components and high speed sorting on conveyors. Always accessible through standard USB support Standard Ethernet port with EtherNet/IP Data Link function High program capacity of up to 400K steps Higher precision for machine

FX3U-64MR/ES-A PLC Industrial Automation / Mitsubishi PLC Module Relay Output Description Mitsubishi FX3U-64MR/ES-A PLC Base Unit FX3U64MRESA 09S211 Extended Product Type: FX-series Product ID: FX3U-64MR/ES-A Mitsubishi Type Designation: FX-series Description of Mitsubishi FX3U-64MR/ES-A PLC Base I/O Unit Mitsubishi FX3U-64MR/ES-A High-end Programmable Logic Controller (PLC) CPU main unit with integrated I/Os – (MELSEC-F (FX) Series FX3U) – 64I/O [32DI (32 x digital inputs

Industrial Automation Programming Logic Controller Mitsubishi PLC FX3U Series FX3U-48MR/ES-A FA-COM PLC: Main Unit Type FX3U Power Supply (V) 100-240 Current Type AC Program Memory 64K STEPS Program Memory Unit RAM Integrated Digital Inputs 24 Integrated Digital Outputs 24 Integrated Analogue Inputs N/A Output Type RELAY Output Logic N/A Local I/O Points 256 Local + Remote I/O Points 384 Expandable YES Cycle Time LD (ns) 65 Cycle Time MOV (ns) 642 USB OPTION Ethernet Port N/A

NX-SID800 Omron Automation And Safety Relays NX 8IN PLC Specifications I/O system NX I/O Bus Type of module Safety I/O Number of digital inputs 8 Digital input type PNP Permitted voltage at input 20.4-28.8 V Number of digital outputs 2 Digital output type None Short-circuit protected outputs Connection method 4-wire Signal processing Free running IO link master I/O connection type Push-in Number of I/O connectors 1 Detachable I/O connector Suitable for safety functions SIL

CJ2H-CPU65-EIP PLC 100K steps Ethernet New Original Omron PLC Units Product Features CJ2H for high speed, high capacity The CJ2H series is ideal for advanced machine automation needs, such as those required in image processing inspection of electrical components and high speed sorting on conveyors. Always accessible through standard USB support Standard Ethernet port with EtherNet/IP Data Link function High program capacity of up to 400K steps Higher precision for machine

My2n-24vdc my2n dc24v my2 220vac 12v ac omron relay Product Overview MY(S) series miniature power relay with DPDT contact form and DC coil Standard model Versatile plug-in relay with LED indicator Plug-in socket/solder terminals Reduces wiring work by 60% when combined with PYF-PU push-in plus socket 2.6mm wide pins offer higher conductivity and less temperature increase Compact design, superb performance High shock resistance reduces malfunctions for unexpected external

Omron G2RV-SR500 24VDC Relay Socket 6A 250VAC for G2RA Series Relays Features • Realized about 25% lower profile than conventional products, contributing to further miniaturization of the control panel. • Realized opening and closing ability with one pole 6 A slim shape. • Micro load products for one pole 50 mA using Au-plated contacts for small load switching also available. • Since G2RV is a transparent case, confirming the state of the contact with the naked eye is

OMRON E2E-X3D1-N 3MM Proximity Sensor Factory Sealed Cost E2E Features: • Standard Sensors for detecting ferrous metals. • Wide array of variations. Ideal for a variety of applications. • Models with different frequencies are also available to prevent mutual interference. • Superior environment resistance with standard cable made of oilresistant PVC and sensing surface made of material that resists cutting oil. • Useful to help prevent disconnection. Cable protector provided

Other models recommended: ATV61H075N4 ATV61HU15N4 ATV61HU22N4 ATV61HU30N4 ATV61HU40N4 ATV61HU55N4 ATV61HU75N4 ATV61HD11N4 ATV61HD15N4 ATV61HD18N4 ATV61HD22N4 ATV61HD30N4 ATV61HD37N4 ATV61HD45N4 ATV61HD55N4 ATV61HD75N4 ATV61HD90N4 ATV61HC11N4 ATV61HC13N4 For more models and details, contact now for an immediate response: Whatsapp:+86 15399949477 Emai: salesc@plcautomate.com

CQM1-PA216|AC-input Power Supply Unit Input Voltage: 100 to 240 V AC, 50/60 Hz Allowable Voltage Range: 85 to 265 V AC Output Capacity (Total): 30 W max. Service Power Supply: 24 V DC, 0.5 A (used to power connected sensors or devices)

Specifications Series FR-E800 SERIES Type FR-E800-ETH INVERTER Minimum Rated Voltage (V) 380 Min. Permissible Voltage (V) 323 Maximum Rated Voltage (V) 480 Max. Permissible Voltage (V) 528 Current Type AC Phases 3 Rated Output Current LD (A) 5,5 Rated Output Current ND (A) 4 Rated Motor Capacity LD (kW) 2,2 Rated Motor Capacity ND (kW) 1,5 Leakage Current (mA) 1,2 Power Loss LD (W) 85 Power Loss ND (W) 59 Protection Class IP20 Expandable YES RS-485 NO USB 1 (MINI B) Ethernet

CP2E-N20DT-D |Programmable Logic Controller CP2E: Controller Series. N: Network model (features Ethernet connectivity and advanced positioning). 20: Total I/O points (12 inputs and 8 outputs). D: Built-in DC inputs. R: Relay outputs. A: Power supply type (100–240 VAC). Input Specifications: 12 points (24 VDC), supports both PNP and NPN. Output Specifications: 8 points (Relay), suitable for handling various load voltages. Memory Capacity: 20 K steps of program capacity and 16

Other models recommended: 442G-MABRB-UR-E0JP4679 442G-MABLB-UL-E0JP4679 442G-MABLB-UR-E0JP4679 442G-MABRB-UL-E0P49 442G-MABRB-UR-E0P49 442G-MABLB-UL-E0P49 442G-MABLB-UR-E0P49 442G-MABRB-UL-P49 442G-MABRB-UR-P49 442G-MABRB-UL-P467 442G-MABRB-UR-P467 442G-MABRB-UL-E0JP4679-N4 442G-MABRB-UR-E0JP4679-N4 442G-MABH-L 442G-MABH-R For more models and details, contact now for an immediate response: Whatsapp:+86 15399949477 Emai: salesc@plcautomate.com

R88M-1M10030T-S2 AC Servo Motor 100W 230VAC Fast Delivery 1S AC servo motor, 100 W, 230 VAC, 3000 rpm, 0.318 Nm, absolute encoder Specifications Servo control method EtherCAT Drive supply voltage 230 V single phase Rated output 0.1 kW Rated speed 3000 r/min Rated torque 0.318 Nm Peak torque 1.11 Nm Encoder type Absolute without battery Encoder resolution 23 Bit Motor with brake no Motor with oil seal no Flange size square (LC) 40 mm Shaft diameter 8 mm Shaft with key yes

Specifications I/O system CJ I/O Bus Expansion unit type CPU Bus Unit Type of module Communication Communication port(s) EtherNet/IP, Ethernet TCP/IP Number of communication ports 1 FAQ 1. who are we? We are based in Hunan, China, start from 2025,sell to North America(13.00%),South Asia(10.00%),Domestic Market(10.00%),Eastern Asia(10.00%),Southeast Asia(10.00%),South America(10.00%),Eastern Europe(8.00%),Mid East(7.00%),Central America(5.00%),Southern Europe(5.00%),Western

Other models recommended: E3Z-LL61 E3Z-LL66 E3Z-LL63 E3Z-LL68 E3Z-LL81 E3Z-LL83 E3Z-LL88 E3Z-L61 E3Z-L66 E3Z-L81 E3Z-L86 For more models and details, contact now for an immediate response: Whatsapp:+86 15399949477 Emai: salesc@plcautomate.com