Cold Rolled Stainless Steel Coil

TISCO ASTM 304 Cold Rolled Stainless Steel Coil 0.5mm 1.5mm 3mm 2B HL Grade 304 stainless steel is generally regarded as the most common austenitic stainless steel. It contains high nickel content that is typically between 8 and 10.5 percent by weight and a high amount of chromium at approximately 18 to 20 percent by weight. It's important to consider that, although 304 stainless steel can corrode, it will not rust in normal atmospheric conditions. The corrosion of stainless

Tisco Cold Rolled Stainless Steel Coils ASTM/AISI 304 304L With 2B Surface 304 Stainless steel coil is the more common and general type of stainless steel. 304 Stainless steel coil is defined by its higher nickel content than other types of stainless steel coil. Due to the rising cost of nickel, this makes 304 stainless steel coil slightly more expensive than the other types. The nickel, however, is what makes type 304 stainless steel coil less susceptible to corrosion. ♦ The

AISI ASTM Cold Rolled Stainless Steel Coil 316L 201 2b Finish What is a 2b finish on stainless steel? Let’s start with basic protection—which applies itself organically. All stainless steels are iron-based alloys containing at least 10.5% chromium. A reaction between that chromium and the oxygen in the atmosphere produces a chromium oxide film at the surface. This allows the film to immediately self-repair in the presence of oxygen in the event of any surface damage. The next

316 SS Austenitic Stainless Steel Sheet Coils Cold Rolled 2B Finish 316 stainless steel due to the addition of Mo element, so that its corrosion resistance, and high temperature strength has been greatly improved, high temperature resistance can reach 1200-1300 degrees, can be used under harsh conditions. Characteristics: Because of the addition of Mo, its corrosion resistance, atmospheric corrosion resistance and high temperature strength is particularly good, can be used

316L 3mm Stainless Steel Coil 300 Series 304 316 310S 321 Slit Edge 300 series stainless steels are the larger subgroup. The most common austenitic stainless steel and most common of all stainless steel is Type 304, also known as 18/8 or A2. Type 304 is extensively used in such items as cookware, cutlery, and kitchen equipment. Type 316 is the next most common austenitic stainless steel. Some 300 series, such as Type 316, also contain some molybdenum to promote resistance to

304 316L Alloy Cold Rolled Stainless Steel Coil 1500mm 2B Surface For Storage Tanks Stainless steel is notable for its corrosion resistance, and it is widely used for food handling and cutlery among many other applications. Stainless steel is used where both the properties of steel and corrosion resistance are required. Its resistance to corrosion and staining, low maintenance, and familiar lustre make it an ideal material for many applications. Storage tanks and tankers used

Tisco Cold Rolled Stainless Steel Coils ASTM/AISI 201/ 304/ 316 With 0.1-3mm Thickness 304 stainless steel is the most common form of stainless steel used around the world due to excellent corrosion resistance and value. 304 stainless steel can withstand corrosion from most oxidizing acids. That durability makes 304 stainless steel easy to sanitize, and therefore ideal for kitchen and food applications. Product Name Tisco Cold Rolled Stainless Steel Coils ASTM/AISI 201/ 304/

Product Description: Cold Rolled Stainless Steel Coil is made of 2D surface stainless steel with thickness ranging from 1mm to 3mm, and standard of ASTM, AISI, DIN, EN, GB, JIS. It has a width of 1000mm to 2000mm and is made of 400 series stainless steel, providing great level of corrosion resistance in various environments. The cold rolled stainless steel coil has a superior surface finish and great performance in terms of tensile strength, fatigue resistance, etc. It is

Product Description: Cold Rolled Stainless Steel Coil is made from 400 series stainless steel material, such as ASTM 441, and processed through cold rolling. This kind of stainless steel coil has excellent surface treatment, which ensures its surface is smooth and even. The tolerance of this stainless steel coil can reach ±0.02mm, and its length can vary from 1000mm to 6000mm. This cold rolled stainless steel coil can be applied in many fields, such as automobile industry and

Product Description: Cold Rolled Stainless Steel Coil is a super high pure ferrite stainless steel made through cold rolling process. With thickness ranging from 1 to 3mm and length 1000 to 6000mm, these coils are available in 2B finish, BA finish, HL finish, No.1 finish, No.4 finish, 8K finish and are packed in standard export sea-worthy packing. The minimum order quantity is 1 Ton. This cold rolled stainless steel coil is highly appreciated for its 2B finish, BA finish, HL

Product Description: Cold Rolled Stainless Steel Coil is a type of stainless steel made from AISI 439 and AISI 400 series stainless steel. It is manufactured in a cold rolling process which imparts better surface finish, tighter tolerances, and higher strengths than hot rolled products. It is mainly used in automotive, construction, medical, and appliance industries. The surface finish of the product is 2B, BA, HL, No.1, No.4, 8K. The length of the coil can be varied from

Product Description: Cold Rolled Stainless Steel Coil is made from ferrite stainless steel, with a 2B finish. This type of stainless steel is a part of the 400 series. It has a thickness of 1-3mm, and a width of 1000-2000mm. It is used for various purposes such as in the manufacture of utensils, kitchenware, etc. The surface of the coil is cold rolled, and it is available in various finishes. It can be used in various applications such as in the automotive, construction, and

Product Description: Cold Rolled Stainless Steel Coil is a type of ferrite stainless steel made of AISI 443. It is a popular material for making coil due to its excellent properties. The coils made from this stainless steel have a smooth, slit edge or mill edge, and are available in various sizes and shapes. Cold Rolled Stainless Steel Coils are typically available in ASTM, AISI, DIN, EN, GB, JIS standards, and a variety of widths and thicknesses. The widths of the coils

Product Description: Cold Rolled Stainless Steel Coil is a 2D surface stainless steel with high strength and precision. It is produced by cold rolling the coil and strip of stainless steel, and then annealing and pickling. The thickness of cold rolled stainless steel coil ranges from 1mm to 3mm, and the minimum order quantity is 1 Ton. This product is widely used for elevator decoration due to its excellent corrosion resistance and aesthetic appearance. It is made of high

Product Description: Cold Rolled Stainless Steel Coil can be used in a wide range of applications, and is suitable for industrial and commercial purposes. This type of stainless steel coil has a 2B finish, meaning it has a smooth, matte surface. It is made from high-quality cold rolled stainless steel, which has excellent corrosion resistance, heat resistance and strength. The coil is resistant to oxidation, and is also easy to process and shape. This product is available in

Product Description: Cold Rolled Stainless Steel Coil is made of 2B finish stainless steel, AISI 443 Ferrite stainless steel material, featuring excellent surface treatment with high quality. The surface of this Cold Rolled Stainless Steel Coil is smooth and bright, and it has high corrosion resistance. It is mainly used in the elevator industry. This Cold Rolled Stainless Steel Coil has a tolerance of ±0.02mm, and can be customized according to the requirements of customers.

Product Description: Cold Rolled Stainless Steel Coil is made from 400 series stainless steel and is available in a variety of widths, Surface Finish, Edge, and Payment Terms. It has been cold rolled to provide a superior surface finish and finish uniformity with minimal scaling for both industrial and commercial applications. The coils are slit edge/mill edge and can be customized to meet the required width and thickness. It is highly corrosion resistant and is ideal for use

Product Description: Cold Rolled Stainless Steel Coil is a type of stainless steel product specifically designed for elevator, and is made of 2D surface stainless steel material. It is available in different standard sizes, such as ASTM, AISI, DIN, EN, GB, and JIS, with a minimum order quantity of 1 ton. The edges of the product can be slit edge or mill edge, and its length ranges from 1000-6000mm while its width ranges from 1000-2000mm. Features: Product Name: Cold Rolled

Product Description: Cold Rolled Stainless Steel Coil is a 2B finish stainless steel product which is made from 400 series stainless steel. It features excellent tolerance of ±0.02mm, making it ideal for applications such as elevator. The standard export sea-worthy packing ensures the product reaches the destination safely. Moreover, the minimum order quantity is 1 Ton and payment term can be T/T or L/C, etc. Features: Product Name: Cold Rolled Stainless Steel Coil Edge: Slit

Product Description: AISI 443 Cold Rolled Stainless Steel Coil is a kind of stainless steel with excellent corrosion resistance, mechanical properties and workability. It has a 2D, 2B surface finish, making it a perfect choice for applications such as elevator. The cold rolling process ensures precise dimensions and tolerance with ±0.02mm. The minimum order quantity is 1 ton, and payment terms such as T/T, L/C are accepted. Our Cold Rolled Stainless Steel Coil offers