Brown Aluminum Oxide

Product Description: Brown corundum is manufactured through high-temperature arc smelting with temperatures ranging from 2,000°C and above. It is made from high-quality bauxite, anthracite, and iron filings. Subsequent to the smelt, it is crushed and plasticized using a self-grinding machine and magnetically separated to remove any remaining iron filings. The product is then sieved into various sizes, resulting in dense, hard textures with high spherical pellets. These brown

Product Description: Brown Corundum is a high quality material made from bauxite, anthracite, and iron filings. It is produced by using an arc furnace at a temperature of 2000°C or higher. After being crushed and plasticized via a self-grinding machine, the iron is magnetically removed and the material is sorted into different sizes. Brown Corundum has dense and hard texture, and the spherical pellets are great for producing ceramic and other materials such as high-resistance

9.0 Mohs Brown Aluminum Oxide Powder Abrasive 180 Mesh 1. Introduction In the process of sandblasting, brown corundum can penetrate deep into the holes and pits on the surface and reach the bare surface of the metal, so it can completely remove all rust, water-soluble salts and other pollutants. Brown corundum is an abrasive material that is produced by smelting bauxite in a high temperature electric arc furnace. The process involves melting the raw material at a temperature

Brown Fused Aluminum Oxide Grits 325 Mesh Grinding Wheel 1. Introduction Brown fused alumina is made of bauxite and anthracite as raw materials and smelted in a high-temperature electric arc furnace of more than 2,000 degrees. Brown corundum abrasive tools are suitable for high-strength metals (such as steel, malleable cast iron, bronze, etc.). Brown Fused Alumina is produced by fusion of bauxite in an electric arc furnace at high temperatures. The brownish coloured product

Brown Corundum 320# Is Used For Sandblasting Grinding Process 1. Product Introduction Brown corundum is used bauxite, coke (anthracite) as the main raw material, which was smelt by high temperature in the arc furnace. Abrasive blasting has the characteristics of short grinding time, high efficiency, good benefit and low price. The product has moderate hardness, high toughness, good self-sharpening, low sand consumption, recycle and reuse, and good grinding finish. The

Deburring Brown Aluminum Oxide 500-425um Surface Beautification 1. Introduction Different from conventional abrasive materials, brown corundum is a pure non-toxic mineral, which does not contain harmful free silicon substances that lead to silicosis, toxic heavy metals or radioactive pollutants. In addition, the low consumption and recyclability of products can greatly reduce the amount and cost of waste disposal after the product is used. 2. Attribute Material Bauxite Grain

Alkai Corrosion Resistance Brown Aluminum Oxide 0-1mm 1-3mm 1. Introduction Brown fused alumina is made of bauxite and anthracite as raw materials and smelted in a high-temperature electric arc furnace of more than 2,000 degrees. Brown corundum abrasive tools are suitable for high-strength metals (such as steel, malleable cast iron, bronze, etc.). Suitable for high-consolidation abrasive products, suitable for grinding, polishing, sandblasting, precision casting, etc. It is

Non-Magnetic Brown Aluminum Oxide F100 Surface Treatment 1. Introduction The brown corundum abrasive has the characteristics of high purity, good crystallization, strong fluidity, low coefficient of linear expansion, and corrosion resistance. The practice of dozens of fire-proof production companies has verified that this product has the characteristics of no explosion, no chalking, and no cracking in the application process. 2. Attribute Density 3.9 g/cm3 Grain 150-125um

Refractory Materials Brown Aluminum Oxide F150 Firebrick-Making 1. Introduction Brown fused alumina is made of bauxite and anthracite as raw materials and smelted in a high-temperature electric arc furnace of more than 2000 degrees. Brown corundum abrasive tools are suitable for high-strength metals (such as steel, malleable cast iron, bronze, etc.). Suitable for high-consolidation abrasive products, suitable for grinding, polishing, sandblasting, precision casting, etc. It

Flame Resistance F180 Brown Aluminum Oxide With 2980°C Melting Point 1. Introduction Brown Fused Alumina is produced by fusion of bauxite in an electric arc furnace at high temperatures. The brownish coloured product shows high hardness as well as extreme toughness. It is produced by fusion of bauxite in a tilting electric arc furnace at high temperatures. The product shows high temperature resistance, strong erosion resistance, high machinery strength as well as thermal

3.9g/cm3 Brown Aluminum Oxide 300-250um Fine-Tech Brand 1. Introduction Brown corundum is made of high-quality bauxite as raw material, anthracite and iron filings. It is made by arc smelting at 2000°C or higher temperature. It is perfect material specifically manufactured to be used for general abrasive applications in bonded abrasive tools, polishing and sandblasting grit. 2. Attribute SiO2 Max 1.4% Grain 300-250um Feature Low linear expansion coefficient Application

Deep-Dark Brown Aluminum Oxide Grain Burnishing F16 1. Introduction Brown corundum, under a certain pressure, can quickly impact the surface of the object with a large number of sharp edges, so it is regarded as a very fast spray grinding method. The acceleration and velocity of particles in the air flow are a function of inertance and particle size. The smaller the particle, the easier it is to accelerate and thus produce a higher impact force on the surface of the object,

Brown Aluminum Oxide 212-180um For Cookware Industry 1. Introduction Brown fused alumina is made of bauxite and anthracite as raw materials and smelted in a high-temperature electric arc furnace of more than 2,000 degrees. Brown corundum abrasive tools are suitable for high-strength metals (such as steel, malleable cast iron, bronze, etc.). Suitable for high-consolidation abrasive products, suitable for grinding, polishing, sandblasting, precision casting, etc. It is also

Brown Aluminum Oxide F120 With Water Filtration Media 1. Introduction The brown corundum abrasive has the characteristics of high purity, good crystallization, strong fluidity, low coefficient of linear expansion, and corrosion resistance. The practice of dozens of fire-proof production companies has verified that this product has the characteristics of no explosion, no chalking, and no cracking in the application process. 2. Attribute Fe2O3 max 0.21% Grain 125-106um Feature

ISO9001 Brown Aluminum Oxide 180-150um In Medical Ceramics 1. Introduction Brown Fused Corundum is an abrasive material that is produced by smelting bauxite in a high temperature electric arc furnace. The process involves melting the raw material at a temperature of approximately 2000°C, and then cooling it down quickly. This results in the formation of brown corundum crystals. 2. Attribute Melting point 2000°C Shape Particle Feature Unique self-sharpening Usage Polishing 3.

1400-1180um Brown Aluminum Oxide Brown Corundum Sand 1. Introduction Brown corundum is made of high-quality bauxite as raw material, anthracite and iron filings. It is made by arc smelting at 2000°C or higher temperature. It is crushed and plasticized by self-grinding machine, magnetically selected to remove iron, sieved into various sizes, and its texture is dense and hard. Brown corundum was used as sandblasting surface treatment, because of its relatively high density, so

Brown Aluminum Oxide Synthetic Corundum 3-5mm 5-8mm 1. Introduction Brown fused alumina is made of bauxite and anthracite as raw materials and smelted in a high-temperature electric arc furnace of more than 2,000 degrees. Brown corundum abrasive tools are suitable for high-strength metals (such as steel, malleable cast iron, bronze, etc.). Brown corundum is non-toxic and environmentally friendly, making it a great choice for use in manufacturing processes that require safe,

Brown Aluminum Oxide Pellets 1180-1000um Non-Pollution 1. Introduction Brown corundum is made of high-quality bauxite as raw material, anthracite and iron filings. It is made by arc smelting at 2000°C or higher temperature. It is crushed and plasticized by self-grinding machine, magnetically selected to remove iron, sieved into various sizes, and its texture is dense and hard. High, spherical pellets, suitable for the production of ceramic, high-resistance abrasive resin and

Brown Aluminum Oxide 355-300um High-Purity Welding Tools 1. Introduction Brown Aluminum Oxide are fused with premium raw materials and 3500 KVA furnace. It is perfect material specifically manufactured to be used for general abrasive applications in bonded abrasive tools, polishing and sandblasting grit. The product shows high temperature resistance, strong erosion resistance, high machinery strength as well as thermal stability. It is a good raw material for manufacturing of

1000-850um Brown Aluminum Oxide For Precision Casting 1. Introduction Brown corundum is made of high-quality bauxite as raw material, anthracite and iron filings. It is made by arc smelting at 2000°C or higher temperature. It is crushed and plasticized by self-grinding machine, magnetically selected to remove iron, sieved into various sizes, and its texture is dense and hard. High, spherical pellets, suitable for the production of ceramic, high-resistance abrasive resin and