EMT Conduit Fittings

ELECMAN ® Zinc Combination EMT To Flex Coupling Compression Screw In Type Applications ELECMAN® Zinc combination EMT to Flex coupling compression screw in type is ideal for a secure joining of flexible metal conduit to EMT. Constructed from corrosion resistant zinc die cast, this compression to screw in type coupling features a smooth pulling surface for wires and require no screws, clamps or fasteners to secure the connection. For indoor use; available in trade sizes 1/2"EMT

ELECMAN ® EMT Fittings Zinc Die Cast 90 Degree Inside Corner Set-Screw Pull Elbows Applications ELECMAN® EMT fittings zinc die cast 90 degree inside corner set-screw elbows are used to change the direction of EMT conduit runs in any direction by 90 angles. They are ideal for continuing the conduit run in tight spaces and areas where bending the conduit is not possible. 90 angle inside corner elbows are easy to install. When conduits cannot be bent, you can turn them by 90

ELECMAN ® Zinc EMT Conduit 90° Corner Couplings Set Screw Type UL Listed Applications ELECMAN® Zinc EMT conduit 90° corner couplings set screw type UL listed are used to fast and easy direction changes of EMT conduit in any direction by 90 degrees. Suited for work in tight spaces where bending the conduit is not advisable. Constructed of naturally corrosion resistant zinc die cast. Available in trade sizes of 1/2" and 3/4". For use in dry locations; UL listed. Features

ELECMAN® Zinc 90 Degree EMT/Rigid Pull Elbows Set Screw Threaded Type With Gasket Applications ELECMAN® Zinc 90 degree EMT/Rigid pull elbows set screw threaded type with gasket are used to facilitate pulling conductors through a 90-degree bend in two pieces of steel EMT, threaded rigid or IMC conduit. The removable cover provides ample access to achieve wire pulling without obstruction. These die-cast zinc elbows are for dry location applications. Features Zinc die cast body,

ELECMAN® Zinc 90 Degree Pull Elbows EMT/Rigid To Box Set Screw Threaded Type Applications ELECMAN® Zinc 90 degree pull elbows EMT/Rigid to box set screw threaded type are used for sharp bends in EMT, threaded rigid or IMC conduit. Removable steel cover for pulling wire. Features Zinc die cast body, aluminum cover, neoprene gasket and steel screws. Body and locknut made from corrosion-resistant zinc alloy. Facilitates wire-pulling and maintenance in EMT/Rigid conduit connected

ELECMAN ® Zinc Die Cast EMT Offset Compression Connectors UL Listed EMT to Box Applications ELECMAN® Zinc die cast EMT offset compression connectors UL listed EMT to box are used to connect EMT conduit to a metal box or enclosure where offset is required. Compression type, assembled with zinc die cast locknut. Provides concrete-tight connections when taped. Suitable for applications above 600V. Features Provide concrete-tight connections and raintight when taped. Steel-plated

ELECMAN ® Zinc Die Cast EMT Offset Set Screw Conduit Connectors UL Listed Applications ELECMAN® Zinc die cast EMT offset set screw conduit connectors UL listed are used to make a slight adjustment in terminating the end of steel EMT conduit to an outlet box or enclosure in dry locations. These die-cast zinc connectors offer a 3/8 In. offset and are approved for concrete-tight applications when taped. Features Provide concrete-tight connections and raintight when taped. Body

ELECMAN ® 90 Degree Zinc EMT Conduit Pull Elbows Set Screw EMT Fitting 1/2" - 1-1/4" Applications ELECMAN® 90 degree zinc EMT conduit pull elbows set screw EMT fitting 1/2" - 1-1/4" for use with Electrical Metallic Tubing. When 90 degree turns are needed in conduits and when wires must be pulled through elbows before making the turn. Pull elbow removable gasket and cover allow for wires to be pulled and fed back into pipes at a 90 degrees angle or turn. Features Zinc die cast

ELECMAN ® UL Listed Zinc Die Cast EMT Pull Corner Elbow Set Screw Type With Gasket Applications ELECMAN® UL listed zinc die cast EMT pull corner elbow set screw type with gasket is used to securely connect EMT conduit together when specifications dictate a 90° bend in the run, set screw type 90° pull elbows offer easy installation and removable covers to facilitate easy wire pulling. Constructed of naturally corrosion resistant zinc die cast; available in trade sizes of 1/2",

ELECMAN® 1/2 Inch Zinc Die Cast EMT Pipe To Box 90 Degree Pull Elbow UL Listed Applications ELECMAN® 1/2 inch zinc die cast EMT pipe to box 90 degree pull elbows UL listed are designed for use when 90° turns are needed in EMT conduits. The set screw pull elbows are protected from moisture and damaging particles by a neoprene gasket; removable coves facilitate easy wire pulling. Zinc; available in trade sizes from 1/2" to 1-1/4"; UL listed. Features Zinc die cast body,

ELECMAN® Zinc 90° Pull Elbows With Gasket EMT To Box Set Screw Type EMT Fittings Applications ELECMAN® Zinc 90° pull elbows with gasket EMT to box set screw type EMT fittings are used when 90° turns are needed in conduits and when wires must be pulled through elbows before making the turn into the electrical junction box or enclosure. Set-screw pull elbows come ready with a gasket and cover that seals out dirt, dust and moisture. The locknut feature on pull elbows secures the

ELECMAN ® Zinc EMT Offset EMT To Box Connectors Compression Type 1/2" 3/4" Applications ELECMAN® Zinc EMT offset EMT to box connectors compression type 1/2" 3/4" feature easy to install compression type assembly and provide secure, concrete tight, offset connection when joining EMT conduit to a metal outlet box or enclosure. Corrosion resistant zinc die cast construction ensures longevity; for indoor and outdoor use and available in 1/2" and 3/4" sizes. UL listed. F

ELECMAN ® Zinc EMT Conduit Offset Connector EMT Conduit To Box Set Screw Type Applications ELECMAN® Zinc EMT conduit offset connector set screw EMT conduit to box type are used to bond EMT conduits to a box in dry locations. Features Provide concrete-tight connections and raintight when taped. Body and locknut die cast of high-strength zinc alloy for corrosion resistance Locknut is reversible and it is designed to cut through protective coatings on boxes and enclosures to

ELECMAN ® Zinc EMT Conduit 90 Degree Corner Coupling Set Screw Type Applications ELECMAN® Zinc EMT conduit 90 degree corner couplings set screw type are used to connect EMT conduits together on a 90° inside corner where space is tight and limited and bending conduit is not feasible. Features Provide concrete tight connection when taped. With removable cover is easy for pulling wire. Used in dry locations. Die cast of high-strength zinc alloy with zinc-plated steel screws to

ELECMAN ® 1/2" - 4" Aluminum Service Entrance Cap Clamp On Type Applications ELECMAN® 1/2" - 4" aluminum service entrance cap clamp on type can be used indoor or outdoor, use with EMT conduits or unthreaded IMC/Rigid conduits to bring overhead electrical service in to buildings. Features Lightweight aluminum body construction eases installation and provides corrosion resistance. Plastic insulator snaps out easily for quick cable insertion. Clamp on style for unthreaded

ELECMAN ® 1/2" - 1" Galvanized Steel EMT Conduit Drive Strap Applications ELECMAN® Galvanized steel EMT conduit drive straps are used to mount EMT conduit to wood or masonry surfaces. Features Suitable for wood or masonry mounting surface. All straps are zinc plated for corrosion protection. For indoor or outdoor use. Certifications and Compliances ELECMAN® Galvanized steel EMT conduit drive straps shall be produced to the following specification: UL Listed Specification Data

ELECMAN ® Zinc Combination EMT(Set Screw) to Flex(One Screw Squeeze) Couplings Applications ELECMAN® Zinc combination EMT(set screw) to flex(one screw squeeze) couplings are used to Secure EMT to flexible metal conduit (FMC). The Tri Drive screw head design works with Phillips, slotted and square screwdrivers. Use indoors only. Features Die-cast zinc alloy body and nut. For indoor applications. Corrosion-resistant design. (set screw)EMT to (one screw squeeze)FMC. Assembled

ELECMAN ® Zinc Combination EMT(Compression) to Flex(Screw In) Coupling Applications ELECMAN® Zinc combination EMT(compression) to flex(screw in) couplings are used to provide a transition from EMT to flexible metallic conduits in dry locations. Features Steel-plated compression ring positively bonds conduit to connector. Die-cast zinc alloy body and nut. For indoor applications. Corrosion-resistant design. (Compression )EMT to (Screw in )FMC. Certifications and Compliances

ELECMAN ® Zinc 90 Degree Pull Elbow EMT Conduit to EMT Conduit Set Screw Type Applications ELECMAN® Zinc 90 degree pull elbows EMT conduit to EMT conduit set screw type are used to make a right-angle turn in a run of EMT conduit. This die-cast zinc-alloy elbow includes a removable aluminum cover to aid in wire pulling. For indoor use. Features Zinc die cast body, aluminum cover, neoprene gasket and steel screws. Facilitates wire-pulling and maintenance in EMT conduit

ELECMAN® Zinc 90 Degree Pull Elbow EMT Conduit to Box Set Screw Type Applications ELECMAN® Zinc 90 degree pull elbows EMT conduit to box set screw type as a wire pulling elbow to facilitate wire pulling through a sharp bend in arum of EMT conduits. Removable cover provides easy access to facilitate wire pulling. Not listed for wet location. Features Zinc die cast body, aluminum cover, neoprene gasket and steel screws. Body and locknut made from corrosion-resistant zinc alloy.