IEC 61386 Conduit Fittings

ELECMAN ® IEC 61386 Steel EMT Rigid Conduit to Beam Black Fastener Applications ELECMAN® IEC 61386 steel EMT/Rigid conduit to beam black fasteners are used to riveted assembly provides support for electrical boxes and conduit runs on either side of the box. Features For cable & pipe transits. Manufactured in accordance with IEC61386-21. Certifications and Compliances ELECMAN® IEC 61386 steel EMT/Rigid conduit to beam black fasteners are produced to the following specification

ELECMAN ® IEC 61386 Zinc Liquid Tight Connector Straight Flexible Conduit To Box Type Applications ELECMAN® IEC 61386 zinc liquid tight connectors straight flexible to box type for use with IEC liquid tight conduit to suit multiple applications. Liquid tight connectors seal out water, oil & dust and other damaging particles to ensure continued product integrity and performance. IEC liquid tight connectors available with an insulated throat for added protection for conduit

ELECMAN ® IEC 61386 Zinc Liquid Tight Connector 90 Degree Flexible Conduit To Box Type Applications ELECMAN® IEC 61386 zinc liquid tight connectors 90 degree flexible to box type are used to terminate and seal liquid tight flexible metal conduit, at 90° angle to either oli tight, liquid tight or rain tight box or enclosure. IEC liquid tight connectors available with an insulated throat for added protection for conduit sizes from 20mm to 110mm. Features 90° component type

ELECMAN ® IEC 61386 Zinc EMT Conduit Coupling Set Screw EMT To EMT Type Applications ELECMAN® IEC 61386 zinc EMT conduit coupling set screw EMT to EMT type are used to economically bond IEC EMT conduits to a box or enclosure in dry locations. Features Rugged metallic construction provides mechanical protection for the receway. Provide concrete-tight connections when taped. Suitable for applications above 600v. Manufactured in accordance with IEC 61386-21. Certifications and

ELECMAN ® IEC 61386 Steel EMT Conduit Coupling Set Screw Connection Type Applications ELECMAN® IEC 61368 steel EMT conduit coupling connectors set screw connection type feature set screw type assembly and provide secure, concrete tight protection when taped to connect ends of thin wall IEC EMT conduits together. Featuring built to last steel construction with electro-galvanized, available sizes from 20mm to 50mm. Features All steel construction insures mechanical protection

ELECMAN ® IEC 61386 Zinc Plated Steel EMT Conduit Strap Two Holes Type Applications ELECMAN® IEC 61386 zinc plated steel EMT conduit strap two holes type, featuring a two-hole style assembly and fabricated in a snap on style for ease of installation. Crafted from high strength, zinc plated resilient steel with a wide range of sizes for multiple applications, 20mm to 50mm trade sizes supports IEC EMT conduit, two hole design supports greater weight load. Features All stamped

ELECMAN ® IEC 61386 20mm-50mm Steel RUC Strut Clamp Two Pieces Universal Type Applications ELECMAN® IEC 61386 steel RUC strut clamps two piece universal type are designed for use with IEC EMT and Rigid conduits. It is made with metal and has an electroplated zinc finish for added strength, and the bolt has a combination hex and slot head for easier tightening. Features Zinc electro-galvanized or hot dipped galvanized are both available. Tri-combination hex head bolt suitable

ELECMAN ® IEC 61386 20mm-50mm Steel RC Strut Clamp Two Pieces Universal Type Applications ELECMAN® IEC 61386 steel RC strut clamps two piece universal type securely mount conduit from strut channel. Two piece construction ensures a dependable, tight fit in strut while Hex/slotted/Phillips head screw clamping affixes conduit in overhead strut channel or wall mount. Features Zinc electro-galvanized or hot dipped galvanized are both available. Tri-combination hex head bolt

ELECMAN ® IEC 61386 Steel EMT/Rigid Conduit Hanger With Bolts Type Applications ELECMAN® IEC 61386 steel EMT/Rigid conduit hanger with bolts type are used to support runs of IEC EMT and Rigid conduit from ceilings and walls in dry or wet locations. IEC conduit hanger feature speed thread with a square neck for easy assembly. For indoor and outdoor applications. Features Furnished with nut and bolt to speed installation. Zinc plated and pre-galvanized are both available. Nut

ELECMAN ® IEC 61386 Zinc Plated Steel EMT Conduit Strap One Hole Type Applications ELECMAN® IEC 61386 zinc plated steel EMT conduit strap one hole type are used to securely fasten and support IEC EMT conduit to a mounting surface. IEC EMT straps are featured in a wide array of sizes to suit multiple applications. Easy to install snap on type is available in 20mm-50mm sizes. Features All stamped steel construction insures mechanical protection All straps are zinc plated for

ELECMAN ® IEC 61386 Zinc Non-insulated Rigid Conduit Bushing Threaded Connection Applications ELECMAN® IEC 61386 zinc non-insulated Rigid conduit bushing threaded connection are used on the end of IEC Rigid conduit or on the end of the threaded connectors to protect wires and cables, and can prevent sharp edges on conduit from damaging wires. Bushings provide smooth, rounded surfaces at the end of raceways, constructed of naturally corrosion resistant zinc die cast to

ELECMAN ® IEC 61386 Steel Rigid Conduit Lock Nut Hexagonal Type Applications ELECMAN® IEC 61386 steel Rigid conduit lock nut hexagonal type are used to secure IEC Rigid conduit and various threaded fittings to steel outlet boxes and other metal enclosures. Electro-galvanized for corrosion resistance. These conduit lock nuts can be used for outdoor applications. Features Tightens without deformation. All steel construction insures mechanical protection. Zinc plated for

ELECMAN ® IEC 61386 Zinc Rigid Conduit Watertight Hub With Insulated Throat Applications ELECMAN® IEC 61386 zinc Rigid conduit watertight hubs with insulated throat are used to connect threaded ICE Rigid conduit to an enclosure or load center requiring a water-tight joint at knockout or slip-fit holes in dry or wet locations, corrosion resistant zinc die cast construction prevents moisture, dust and other damaging particles entering conduit. Oversized locknut prevents damage

ELECMAN ® IEC 61386 Steel Rigid Conduit Coupling Threaded Connection Type Applications ELECMAN® IEC 61386 steel Rigid conduit coupling threaded connection type feature a tubular threaded type assembly and ensure proper alignment and a secure connection when joining two ends of threaded IEC Rigid conduits. Other applications include bonding threaded conduits to electrical junction boxes or enclosures when used in conjunction with chase nipples and connectors. Constructed of

ELECMAN ® IEC 61386 Zinc Rigid Conduit to Liquid Tight Conduit Connector Threaded Type Applications ELECMAN® IEC 61386 zinc Rigid conduit to liquid tight connectors threaded type are designed to connect and effectively bond IEC Rigid conduit to liquid tight conduit in dry location. Features (Threaded) Rigid conduit to liquid tight conduit. Used in the dry location. Manufactured in accordance with IEC61386-1 . Certifications and Compliances ELECMAN® IEC 61386 zinc Rigid

ELECMAN ® IEC 61386 Zinc EMT Conduit to Liquid Tight Conduit Connector Set Screw Type Applications ELECMAN® IEC 61386 zinc EMT conduit to liquid tight conduit connectors set screw type are used to provide a transition from IEC EMT conduit to liquid tight conduit in a dry location. Features (Set screw) EMT conduit to liquid tight conduit. Used in the dry location. Manufactured in accordance with IEC61386-1 . Certifications and Compliances ELECMAN® IEC 61386 zinc EMT conduit to

ELECMAN ® IEC 61386 Steel EMT Conduit Connector Set Screw Connection Type Applications ELECMAN® IEC 61368 steel EMT conduit connectors set screw connection type are assembly provide secure concrete tight protection when taped and are available in sizes from 20mm to 50mm. Applications include use in dry locations to bond IEC EMT thin wall conduits to electrical boxes or enclosures. Assemblies include steel locknut, constructed of strong and long lasting steel with electro

ELECMAN ® IEC 61386 Steel EMT Conduit Coupling Sleeve Connection Type Applications ELECMAN® IEC 61386 steel EMT conduit couplings sleeve connection type are a great choice for joining and bonding two IEC EMT conduits. These couplings are made of corrosion-resistant steel. Features All steel construction insures mechanical protection for the raceway. Provide concrete-tight connections when taped. Suitable for applications above 600v. Manufactured in accordance with IEC61386-21

ELECMAN ® IEC 61386 Steel EMT Conduit Connector Sleeve Connection Type Applications ELECMAN® IEC 61386 steel EMT conduit connectors sleeve connection type are designed to connect and effectively bond IEC 61386 EMT conduit to steel outlet boxes, load centers and other metal enclosures. Features All steel construction insures mechanical protection for the raceway. Provide concrete-tight connections when taped. All components are zinc electro-plated for corrosion protection.

ELECMAN ® IEC 61386 Zinc EMT Conduit Connector Set Screw EMT Conduit To Box Type Application ELECMAN® IEC 61386 zinc EMT conduit connector set screw EMT conduit to box type are used to economically bond IEC EMT conduits to a box or enclosure in dry locations. Features Rugged metallic construction provides mechanical protection for the receway. Provide concrete-tight connections when taped. Assembled with a die cast locknut. Manufactured in accordance with IEC 61386 - 21.