Oxygen Gas Sensor

AOM-09 Oxygen Gas Sensors Partial Pressure Electrochemical About 40g Oxygen sensor * Full range linear output * No external power supply required for operation * Temperature compensation * Fast response * Accurate and reliable * Strong anti-interference ability Application Scope AOM-09 oxygen sensor does not require external power supply when working. It is professionally and accurately calibrated and temperature compensated before leaving the factory. It can be used as the

AOD1000 Oxygen Gas Sensors High Pressure Resistance 3 Pin Connector AOD1000 hyperbaric oxygen sensor is a sensor that can be used in high pressure environments, the interface model is Molex 3-pin connector, its structure and composition are different from the sensor that detects oxygen under normal pressure, and can with- stand much higher pressure than the general oxygen sensor. T compensation

C03-0942-000 Electrochemical Oxygen Gas Sensor For Detecting Oxygen Concentration In Air Product Uses: The C03 - 0942 - 000 gas sensor is an oxygen - detecting sensor, mainly used for detecting the oxygen concentration in the air. It is compatible with gas monitors such as ToxiRAE Pro, MultiRAE Lite, MultiRAE, MultiRAE Benzene, and MultiRAE Pro. It can be applied in various environments that require oxygen concentration monitoring, such as industrial safety monitoring,

Gas Oxygen Sensor KE-50 Long Life Electrochemical Oxygen Sensor for Medical Field Biotechnology Product Features: Long Life: With an expected service life of up to 10 years, it can provide stable performance over an extended period. Good Chemical Stability: Hardly affected by common gases such as CO₂, CO, H₂S, NOₓ, and H₂, ensuring high - accuracy oxygen measurement. Low Cost: Has cost - effectiveness, suitable for a variety of applications. Operates in Normal Ambient

Oxygen Sensor KE-25F3 KE-25F3LF for Medical Field Product Features: The threaded top design makes it convenient to install and fix. It has a long service life of 5 years, providing stable performance over an extended period. The output signal is stable, and there is no need for pre - heating, which simplifies the use process. It is hardly affected by common gases such as CO₂, CO, H₂S, NOₓ, and H₂, ensuring high - accuracy oxygen measurement. Applications: Medical Field: Used

MOX1 MOX-1 AA829-210 Oxygen Gas Sensor for Ventilator Anesthesia Machine and Oxygen Concentration Monitorin Features: Wide measurement range: It can measure oxygen partial pressure from 0 mbar to 1500 mbar, corresponding to an oxygen concentration range of 0% - 100% vol. O2. Fast response: The response time (t90) is less than 15 seconds (from air to 100% O2). Good linearity: It has a linear output from 0% to 100% O2, which meets the requirements of ISO 80601 - 2 - 55. Stable

O2-A3 Oxygen Gas Sensor for Safety Applications Medical Field Application Scenarios: Safety Applications: Since it can accurately measure oxygen concentration and has good environmental adaptability, it is suitable for use in places where ensuring the safety of personnel in terms of oxygen levels is crucial, such as mines, confined spaces, and industrial plants. Medical Field: Although specific medical applications may require further adaptation and compliance with relevant

7OX-V Oxygen Gas Sensor for Gas Detection Medical Gas Applications Product Uses: Gas Detection: It is suitable for use in portable or fixed - type gas detectors, and can detect oxygen concentration in various environments, such as in coal mines, metallurgy, fire - fighting, and petrochemical industries. Life - Safety Applications: Used in oxygen alarms to ensure the safety of personnel in environments where oxygen concentration needs to be monitored, such as in confined

AO2 PTB-18.10 Highly Stable Oxygen Gas Sensor For Oxygen Alarm Devices Application Fields: Motor vehicle exhaust gas detection equipment. Exhaust gas environmental protection detection equipment. Oxygen index testing equipment. Oxygen alarm devices. Safety oxygen monitoring systems in coal mines, steel, and petrochemical fields. Installation and Usage Precautions: Avoid exposure to high - concentration solvent vapors during storage, installation, and operation. When using

4OX-V SR-X2V AAY80-390 Oxygen Gas Sensor For Industrial Safety Medical Field Application Scenarios: Industrial Safety: It is mainly used to measure the oxygen gas concentration in the environment, and is widely used in coal mines, steel, petrochemical and other industries, and can be applied to oxygen alarms and atmosphere analyzers. Medical Field: It can be used in medical oxygen - making machines to monitor the oxygen concentration. It can also be installed on the oxygen -

6850645 Gas Oxygen Sensor For Medical Ventilation Equipment Product Features: High - precision Measurement1: It only has a detection reaction with oxygen, and its properties are stable. It can ensure the accuracy of oxygen concentration measurement, providing patients with accurate and sufficient oxygen supply, and helping medical staff make accurate judgments on the condition. Rapid Response: The response time is 0.5 seconds, which can quickly react to the change of oxygen

O2-W2 Electrochemical Oxygen Sensor For Industrial Furnaces Automotive Industry Basic Introduction: O₂ - W₂ oxygen sensor is a device designed to accurately detect the concentration of oxygen in various environments. It plays a crucial role in applications like industrial gas analysis, automotive exhaust monitoring, and indoor air quality control. Working Principle: Typically, the O₂ - W₂ oxygen sensor operates based on electrochemical or zirconia - based principles. In the

O2-A2 Electrochemical Oxygen sensor For Medical Field Firefighting and Safety Monitoring Working Principle: It operates based on the electrochemical principle. Oxygen molecules in the measured gas enter the sensor and participate in redox reactions at the sensing electrode. These reactions generate an electrical current, and the magnitude of this current is proportional to the oxygen concentration in the gas, enabling the determination of oxygen levels. Features: High

AO-08 Gas Electrochemical Sensor Oxygen Analyzer Anti Interference Use For Breathing Machine The AO-08 medical oxygen sensor is intended as the oxygen sensing component of an oxygen analyzer to measure oxygen concentration in respiratory gas mixtures in the following applications: *Oxygen Sensing Devices *Oxygen Concentrator Controls *Medical Ventilators *Anesthesia Equipment *Incubators The AO-08 is an electrochemical oxygen sensor for oxygen concentra-tion measurement and

Product Description: KGZ-NGL-096-273 High-Precision Airborne Oxygen Sensor Zirconia (O2 Sensor) Features: Flange-mounted zirconia oxygen sensor KGZ-NGL-096-273 is designed for use in the sampling chamber. It is favored by SST's aerospace customers as well as applications that require high-temperature and high-pressure operations. Technical Specification Heater voltage Operation: 4.35VDC ± 0.1VDC (1.85A) Standby: 2VDCDC (0.85A) The pump impedance at 700°C is less than 6kΩ The

O2S-FR-T5 Zirconia O2 Gas Sensor Long Life And High Accuracy FEATURES • Zirconium dioxide (ZrO2) sensing elements • Long life, non-depleting technology • Integral heating element • High accuracy • Requires an external interface board to operate BENEFITS • No reference gas required • No need for temperature stabilisation • Flange mounting TECHNICAL SPECIFICATIONS Operating 4.35VDC ± 0.1VDC (1.85A) Standby 2VDC (0.85A) Pump impedance at 700°C < 6kΩ Permissible gas temperature

AO-02 Oxygen sensor Product Summary: The high-quality AO-02 oxygen sensor is a type of sensor that measures oxygen concentration based on electrochemical principles. It adopts a molded body design and features rapid response and a long service life. For the AO-02 oxygen sensor, the structure and temperature compensation process have been optimized to provide high-quality products and a more attractive cost performance. Full-range linear output No external power supply is

KE-25FL Lead-free oxygen sensor characterized by lead-free long service life and excellent chemical stabilit Notes: 1) If two oxygen concentrations of 0% and 30% are used for calibration If accurate, the range is 0 ~ 30% oxygen content When KE-12F3LF and KE-25LF/KE-25F3LF Full scale accuracy is ±1%, KE-50LF full The accuracy is ±2%. If you use 0% and 100% Two oxygen concentrations to calibrate the range When the oxygen content is 0-100%, KE-25F3LFM is full The accuracy of the

4O2-LQ Gas oxygen sensor Basic Information: Measurement Range: Typically 0–30% vol. O₂ (also available in specifications like 0–25% vol. O₂). Model Examples: CITY brand 4-O₂ (Lq), product codes such as 2112B0231400 (CLE-0231-400). Application Fields: Instruments and meters for oxygen concentration detection. Technical Features: Technology Principle: Adopts solid-state electrochemical technology with a three-electrode advanced design and standard liquid electrolyte, ensuring

0393.0000 Gas Oxygen Sensor General Information: Model: 0393.00001. Brand: Testo1. Product Type: Spare oxygen sensor for flue gas analyzers1. Compatible Instruments: Testo 340, Testo 350 flue gas analyzers4. Technical Parameters: Measurement Range: 0 - 25 Vol.%. Accuracy: ±0.2 Vol.%. Resolution: 0.01 Vol.%. Response Time: < 20 s. Weight: 38 g. Dimensions: 40 x 30 x 30 mm (LxWxH). Housing Material: Plastic. Product Colour: Grey and white. Features: Pre - Calibrated: The sensor