Gas Sensor

Product Description: YJJ MP801 0.5 - 1000PPM Metal Oxide Semiconductor (MOS) Air Quality Sensor Features: MP801 is a metal oxide semiconductor (MOS) air quality sensor, sensitive to benzene, -, formaldehyde, alcohol and smoke. Its typical detection range is 0.5 - 1000 ppm (measured by alcohol), and the standard test conditions are 20 ± 2 ℃, 65 ± 5% RH, with a preheating time of ≥ 48 hours. Parameters Symbol / Unit Typical Value / Range Remarks Detected Gas — Benzoic acid, -,

7ETO-10 Ethylene Oxide (EO) Gas Sensor For Medical Sterilization Post-Ventilation Monitoring Portable Occupational Safety Detectors 1. Product Overview: The 7ETO-10 is a compact, high-performance ethylene oxide (EO/ETO) gas sensor tailored for low-concentration EO detection scenarios. It adopts advanced electrochemical sensing technology to deliver reliable, real-time monitoring of EO—critical for applications where even trace EO leaks pose health, safety, or regulatory risks

ZP01-MP503 Air-Quality Detection Module For Air cleaner Fresh-air System Intelligent Integrated Ceiling Description: ZP01-MP503 air-quality module adopts flat surface semiconductor gas sensor. The module has very high sensitivity to volatile organic gases such as formaldehyde, benzene, carbon monoxide, ammonia, hydrogen, alcohol and smoke of , essence &etc. The module has been aging, debugged, adjusted and calibrated. So it has good consistency and high sensitivity.

4HS-LM Hydrogen Sulfide Gas Sensor For Accurately Detect Concentration Of Hydrogen Sulfide Gas Product Usage: It is mainly used to accurately detect the concentration of hydrogen sulfide gas. It is widely applied in various industries, including petroleum gas production and processing, chemical plants, refineries, fertilizer production, public facilities, sewage treatment, paper - making, food and beverage, biogas,etc., serving for safety detection, environmental monitoring,

HDS10 Dew Sensor High Sensitivity And Fast Response For Model Differences HDS10 Dew - point Sensor: Product Overview: The HDS10 dewing sensor is a positive - characteristic switch - type element. It is insensitive to low humidity and only sensitive to high humidity. It can work under DC voltage, with stable quality, and its reliability reaches the international advanced level. Application Scenarios: It is suitable for electronics, food, warehousing, tobacco, textiles,

VOC-B4 electrochemical gas sensor For Environmental Air Quality Monitoring Features: Can be used with Alphasense's individual sensor boards (ISB) for seamless integration into bespoke circuits. Provides accurate and reliable VOC detection to meet specific application requirements. Boasts excellent response times and performance, ensuring consistent data collection. Suitable for various environmental air quality applications. Adaptable voltage from 0V to 0.3V. Available in

SPSTAXF1SS Sensepoint Detector Specifically Designed To Measure Methane The SPSTAXF1SS is a spare sensor for the Sensepoint detector. It is specifically designed to measure methane gas with a measurement range of 0 - 100% LEL (Lower Explosive Limit). This sensor is part of the Sensepoint range of gas detectors, which offer users a cost-effective solution to their gas monitoring needs, suitable for indoor or outdoor use, and even in potentially explosive atmospheres. The

7HCL-20 Electrochemical Hydrogen Chloride Sensor For Industrial Production Safety Detection Usage: The 7HCL - 20 gas sensor is mainly used to measure the concentration of hydrogen chloride (HCl) gas in the air. Hydrogen chloride is a highly corrosive inorganic acid gas, widely present in the working environments of industries such as chemical production, battery manufacturing, electroplating, which poses a threat to human health and equipment safety. Therefore, this sensor is

4O2-LF Electrochemical Oxygen Gas Sensor For Semiconductor Manufacturing Food Modified Atmosphere Packaging Product Uses: 3D Metal Powder Printing: It is used to monitor the residual oxygen concentration in inert gases (such as argon) in real - time, which can prevent metal powders such as titanium and aluminum from oxidizing during high - temperature printing, avoid the increase of the porosity of printed parts and the decrease of strength, and eliminate the risk of dust

MLF-19GE Oxygen Sensor for Medical Equipment Such As Anesthesia Machines Usage: Mainly used for measuring the flow of liquids in circular pipes, widely applied in industries such as metallurgy, power, thermal energy, chemical engineering, tap water, and railways. It is suitable for measuring the flow of homogeneous fluids like water, river water, seawater, petroleum, and chemical liquids. Characteristics: Long service life Adopts ceramic sensors bonded with metal alloys,

NE7-NO2 Electrochemical Gas Sensor General Information: Series:7NE Series Target Users:Gas detector manufacturers Product Features:Easy to operate, accurate measurement, reliable performance, suitable for industrial sites, laboratory measurements, and other requirements. Technical Parameters: Operating Voltage:DC5V±1% Operating Current:≤50mA (catalytic type ≤100mA) Detected Gas:Nitrogen Dioxide (NO₂) Installation Method:7-pin plug-in type Measurement Range:Multiple options: 0

BWS2-H-Y-CN H2S Gas Analyzer Reliable Performance Product Overview: Model: BWS2-H-Y-CN Detectable Gas: Hydrogen Sulfide (H₂S) Product Features: User-Friendly Operation: Features a simple and easy-to-read display supporting multiple languages. Lightweight and Portable: Dimensions are 7.0×6.7×3.6 cm (1-series sensor), weighing less than 116g for convenient carrying. Easy Maintenance: Common maintenance tasks such as replacing sensors, filters, or batteries can be done without

ZP16-A Air-Quality Detection Module Description: The ZP16-A air quality module uses an advanced chip thick film semiconductor gas sensitive element. The module has good sensitivity to volatile organic gases such as formaldehyde, benzene, carbon monoxide, ammonia, hydrogen, alcohol , essence & etc. The module has been aging, debugged, adjusted and calibrated. So it has good consistency and high sensitivity. Application: Air cleaner, fresh-air system, intelligent integrated

ZPS20 Digital type Module Description: Digital type ZPS20 module is a general-purpose air quality sensor module. This module is to detect VOC gas concentration, ambient temperature and humidity, adopting advanced semiconductor VOC gas sensor and MEMS temperature humidity sensor. It has the features of high sensitivity and digital output, which is convenient to use. Application: Air cleaner Fresh-air system Intelligent integrated ceiling Air quality detector Ventilation fans

TGS8100 - for the detection of Air Contaminants Features: * Surface mount package * Low power consumption * High sensitivity to smoke, cooking odors, and gaseous air contaminants * Long life * Low cost Applications: * Indoor air quality monitors * Air cleaners * Ventialtion control * Kitchen range hood control The sensing element is comprised of a sensing chip and an integrated heater formed on a silicon substrate using MEMS technology, and a metal-oxide semiconductor layer

Product Description: ZP16 Air Quality Module For Air Quality Detector Ventilation Fan Features: Air quality module adopts advanced chip thick film semiconductor gas sensor, which has extremely high sensitivity to organic volatile gases such as formaldehyde, benzene, carbon monoxide, ammonia, hydrogen, alcohol, smoke and flavor. After aging, debugging, calibration and calibration, the module has good consistency and extremely high sensitivity. Product Model ZP16 Air quality

Product Description: Micropel 75 PM759-000 Combustible Gas Sensor Is Used In Gas Detectors Features: The table below shows the response variation of a MICROpeL™ 75 on exposure to a range of gases and vapours at the same %LEL concentration. The figures are experimentally derived and expressed relative to the methane signal (=100). Gas/Vapour Relative Sensitivity* Gas/Vapour Relative Sensitivity* Methane 100- 65 Propane 60 Methyl ethyl ketone 55 n-Butane 70 Tolu55 n-Pentane 60

ZP01-MP503 Air Quality Monitoring Module Formaldehyde Flat Surface Semiconductor ZP01 air quality module adopts advanced chip thick film semiconductor gas sensor. The sensor has extremely high sensitivity to organic volatile gases such as formaldehyde, benzene, carbon monoxide, ammonia, hydrogen, alcohol,smoke, and essence. The module has been aged, debugged, calibrated and calibrated, and has good consistency and high sensitivity. Specification Sheet: Working voltage 5.0V±0

1O2 AAW85-07WD-CIT 3 - Electrode Electrochemical Oxygen Sensor For Auxiliary Monitoring Modules In Medical General Description: The 1O2 AAW85 - 07WA - CIT is a 3 - electrode electrochemical oxygen sensor of the 1 - series size. It converts the electrochemical reaction of oxygen into a measurable electrical signal to achieve accurate detection of oxygen concentration in the environment. With the advantages of long service life and stable detection performance, it is widely

Mipex-02-3-I-1-1A(40)Non Dispersive Infrared (NDIR) Methane Gas Sensor For Hazardous Area Monitoring Product Uses: Hazardous Area Monitoring: It is ideal for use in explosive - hazardous areas (Groups I and II according to IEC 60079 standards), such as in the mining, oil and gas, and chemical processing industries. It can continuously monitor the gas concentrations in these environments to ensure safety. Environmental Monitoring: Suitable for detecting the concentration of