Electronic Gas Analyzer

Product Description: YJJ BWS1-R-Y Wireless Version Single Hydrogen H2 Detector Used Hydrogen Leak Monitoring Features: I. Core Parameters (25℃, Diffusion Type) 1. Detected Gas and Range Gas: Hydrogen (H₂), Electrochemical Sensor. Range: 0–1000 ppm; Resolution: 2 ppm. Alarm Threshold: Low alarm 100 ppm, High alarm 500 ppm (customizable). 2. Performance Response Time T90: ≤ 60 seconds. Accuracy: ≤ ±3% FS; Repeatability: ≤ ±1% FS. Sensor Life: Approximately 2 years. 3.

Product Description: YJJ BWS2-X-Y-CN Solo Maintenance-Enabled Single Gas Detector For Industrial Safety Features: BWS2 = Economic Edition; X = Gas Type (O₂/CO/H₂S/SO₂, etc.); Y = Sensor Generation; CN = China Compliance Edition. 1. Core Parameters (25°C, Diffusion Type) 1. Gas Detected and Range (Optional) O₂ (Oxygen): 0–30% VOL, Resolution 0.1% VOL, Low Alarm 19.5%/High Alarm 23.5% VOL CO (Carbon Monoxide): 0–1000 ppm, Resolution 1 ppm, Low Alarm 25 ppm / High Alarm 50 ppm H

Product Description: YJJ BWS2-M-Y Solo Series of Single Gas Detectors Are Used for Industrial Safety CO Gas Monitoring Features: BWS2-M-Y is a portable carbon monoxide (CO) sensor designed for industrial and hazardous environments (integrated into a single gas detector). It is primarily used for precise detection of carbon monoxide concentration and real-time alarm. The following is a detailed parameter description: 1. Core Detection Parameters Detected gas: Carbon monoxide

Product Description: YJJ XT-BAT-K1Battery Replacement Part Suitable For BW Gas Detector Max XT II Features: XT-BAT-K1 is not a gas analyzer model, but the battery model for the - BW GasAlert Max XT II Gas Analyzer. Below are the English parameters of this analyzer: 1. Detected Gases & Ranges Hydrogen Sulfide (H₂S): 0-200 ppm Carbon Monoxide (CO): 0-1000 ppm Oxygen (O₂): 0-30.0% Volume Combustible Gases: 0-100% LEL or 0-5.0% Volume (Methane) 2. Resolution H₂S & CO: 1 ppm O₂: 0

Product Description: YJJ GA-USB1-IR Gas Analyzer Accessories BW-Gasmonitors Infrared Data Cable Features: GA-USB1-IR is an infrared connection kit under the brand name BW -. It is mainly used for data transmission and settings adjustment of gas detectors. The following is an introduction to its parameters and application scenarios: Parameters Interface type: Infrared interface. Length: 48 inches (approximately 1.22 meters). Compatible devices: Suitable for gas detectors of

Product Description: YJJ GA-PA-1-AU Four-in-One Gas Detector Dedicated Charger Is Used For BW MicroClip XL Four-in-One Gas Detector Features: GA-USB1-IR is an infrared connection kit under the brand name BW -. It is mainly used for data transmission and settings adjustment of gas detectors. The following is an introduction to its parameters and application scenarios: Parameters Interface type: Infrared interface. Length: 48 inches (approximately 1.22 meters). Compatible

Product Description: YJJ BW XT-LCD-K1 Display Is Used for Four-in-One Gas Detector MicroClip XL Features: Small size. Easy to use. Reliable operation. Affordable protection. With that combination of benefits, it’s no wonder the - BW™ MicroClip is the world’s most popular multi-gas detector, serving as your trusted companion in hazardous environments — keeping you safe without weighing you down. Plus, it’s the first multi-gas detector with a rating of IP68 for unmatched water

BWS1-R-Y Portable Wireless Hydrogen (H2) Detector Is Used for Industrial and Safety Monitoring Feature: Wireless BLE connectivity for real time data sharing with Safety Suite software. One button operation with multi language digital LCD display and auto backlight. Triple alarms: 95 dB audible, bright LED visual, and strong vibrating alerts. Serviceable design: field replaceable sensors, battery, and filter without disassembly. Dust/waterproof (IP66/IP68) and shock resistant

BWS2-X-Y-CN Portable Single Gas Detector Designed for Oxygen Monitoring Confined Space Entry Safety Key Features: Single button operation for easy use Tool less maintenance: Replace sensor/filter/battery without disassembly High reliability 1 Series O2 sensor (3 year warranty, 5 year expected life) Multi language display (supports Chinese) Data logging: 6 month rolling storage (5 second intervals) Triple alarm: Audible (95 dB), visual, and vibration Compact & rugged: IP66

RDS-30S Radiation Survey Meter a Handheld Digital Dose - Rate Meter for Gamma/X - Ray Detection with IP67 protection Core Applications (Product Uses): Occupational Radiation Protection: Personal dose - rate monitoring for workers in nuclear power plants, radiology departments, industrial radiography, and nuclear medicine to ensure exposure stays within safe limits. Field & Environmental Survey: Rapid on - site detection of gamma/X - ray levels in radiation - contaminated

SP-SGTP-CL2 Portable Chlorine Gas Detectorl Gas Monitoring Device Designed for Real-time Detection and Alarm of Chlorine (Cl2) Key Features: Replaceable sensor and battery, reducing long - term operating costs compared to disposable detectors. Power on / off function to save battery power when not in use. Automatic sensor fault detection for reliable performance. High - performance alarms: Audible (90dB at 10cm), vibrating, and red LED flashing alarms for immediate alerts

SP-SGTP-O2 Portable Oxygen Detector Is Designed for Real-time Monitoring of Ambient Oxygen Levels Key Features: Replaceable sensor and battery for cost-effective long-term use. Triple alarms: Audible (90dB at 10cm), vibrating, and red LED flashing for multi - scenario alerts. Event logging: Stores up to 30 recent alarm events for traceability. IR Link connectivity for easy configuration and data download. Automatic sensor fault detection ensures operational stability. Simple

SP-SGTP-NH3 Portable Ammonia Gas Detector for Refrigeration & Cold Storage Industry Chemical & Fertilizer Manufacturing Key Features: Replaceable sensor and battery, reducing long - term operational costs and extending service life. Power on/off control for efficient battery power management. Automatic sensor fault detection for stable and reliable operation. Triple alarms: Audible (90dB at 10cm), vibrating, and red LED flashing, ensuring timely alerts in hazardous conditions

ToxiRAE Pro LEL EC Gas Monitor Personal Qireless Monitor for Combustible Gases ToxiRAE Pro LEL is Huarui's highest performance personal combustible gas detector, which can quickly, reliably and accurately detect various combustible gases in dangerous working environments, providing effective personal safety protection for field workers. It can be widely used in petroleum, petrochemical, gas and chemical fields. Main Features of PGM-1820 Combustible Gas Detector Real-time data

Product Description: YJJ PGM-2500 Portable Four-One Wireless Gas Detector Used For Gas Monitoring Hazardous Environments Features: PGM-2500 is a four-in-one portable gas detector under the QRAE 3 series of the American company Hua Rui. It is not a traditional analyzer. It comes in two versions: pump suction type and diffusion type. The core function is to simultaneously detect various gas concentrations to ensure personnel safety. It is widely applicable to industrial and

Professional four-in-one portable gas detector with catalytic bead combustible gas sensor and electrochemical sensors for H2S, CO, and O2. Features TWA and STEL alarms, 95 dB audible alerts, user-configurable settings, and comprehensive 0-95% humidity operation. Ideal for industrial safety applications requiring reliable multi-gas monitoring.

Professional four-in-one gas detector with combustible gas monitoring, H2S 0-200 ppm, CO 0-1000 ppm, O2 0-30.0%, and LEL 0-100% detection ranges. Features IP66/67 waterproof rating, 95dB multi-alarm system, and up to 13 hours battery operation. Ideal for industrial safety applications requiring reliable gas detection in harsh environments.

Product Description: YJJ X-Am5600 Is A Single Gas Detector Suitable for Detecting HF HCL H2O2 or Hydrazine Features: I. Product introduction The X-AM5100 is suitable for the detection of HF, HCl, H2O2 or hydrazine in the manufacture of petrochemical products, aseptic packaging, or corrosion protection of hot hand devices. The Draeger X-AM5100 portable single gas detector is the most reliable choice for measuring HF, HCl, H2O2 or hydrazine. This is beneficial to certified

The PIN S6775 Si Pin Photodiode offers high-speed response and exceptional sensitivity with a large 5.5×4.8mm photosensitive area. Packaged in a compact 7×7.8mm plastic SIP that blocks visible light, this photodiode is optimized for 700-1100nm near-infrared detection applications requiring reliable performance and precise wavelength sensitivity.

Compact PID-based toxic gas detector providing 30+ hours of continuous operation with IP65 protection. Features 95 dB audible alarm, vibration alert, and 3-month data logging capacity. Ideal for petroleum, chemical, and environmental safety applications requiring reliable VOC detection in hazardous conditions.