Other Sensors

Product Description: SDS198 TSP/PM100 Dust Sensor Is Small In Size And Easy To Integrate Features: PM100 sensor, also known as total dust or TSP sensor. The SDS198 uses the principle of laser scattering to obtain the concentration of 1-100 micron suspended particles in the air. The imported laser and photosensitive components are used, and the data is stable. Built-in fan, digital output, high integration. peculiarity Accurate data: laser detection, stable and consistent;

Advanced SPS30 particulate matter sensor featuring laser scattering technology with 10+ year operational lifespan. Compact 41x41x12mm design, 4.5-5.5V operating range, and superior precision for mass and number concentration sensing. Ideal for air quality monitoring and environmental dust detection applications.

Professional SDS198 PM100 laser optical dust sensor detects particulate matter from 1 to 100 microns using advanced scattering technology. Features built-in fan, digital output, 1 μg/m³ sensitivity, and operates from -20°C to 50°C. Ideal for construction sites, industrial facilities, and environmental monitoring with reliable performance and compact 71x70x23mm design.

MAX XT II Pump Suction Type Four-in-one Gas Detector Features: Easy to Operate: Single - button operation for simplicity, cost - saving, and reduced training requirements. Accurate Sampling: Equipped with SmartSample pump technology to minimize the risk of pump blockage and improve the accuracy of remote sampling results. Rugged and Durable: Compact and comfortable, suitable for use in harsh field conditions. It has a built - in shock - resistant housing and an IP66/67

MC2-FC1 Gas Detector Yellow Front Housing Replacement Part MCXL-FC1 The "MC2-FC1" is not a specific detector model but refers to the yellow front housing replacement part for BW's GasAlertMicroClip XT gas detector. Below is the product information related to the GasAlertMicroClip XT gas detector: GasAlertMicroClip XT Gas Detector Detectable Gases Simultaneously monitors hydrogen sulfide, carbon monoxide (CO), oxygen , and combustible gases (LEL%). Product Features: User

Product Description: XT-RF-H5 Filter Is Used In The BW GasAlert MAX XTII Pump Suction Four-in-one Gas Monitor Features: XT-RF-H5 filter is used in the BW GasAlert MAX XTII pump suction four-in-one gas monitor The GasAlertMax XT II is capable of reliably monitoring up to four hazardous gases. At the same time, it combines an intuitive single-button interface operation with a robust and durable electric pump Combined, it can perform intelligent and remote sampling, which is

Product Description: 012-63000 Excelitas Fluorescence Microscope Bulb X-Cite 120 Series Mercury Lamp Features: 012-66000R is a mercury lamp bulb of the X-Cite series produced by LUMEN DYNAMICS, with the model number X-Cite 200DC. The following is the collation of key information: 1. Basic parameters: ◦ Power: 200W ◦ Rated service life: 2000 hours (Typical service life: 2500 hours) Spectral range: 340-800nm, non-detachable ◦ Input voltage: 100-240VAC, 50/60Hz 2. Characteristic

Product Description: ME300BF Xenon Lamp Cold Light Source Is Used For Medical Surgical Microscopes Features: Product Model :ME300BF Brand :EXCELITAS Rated power :300W Rated current :22A Rated voltage :13.5V Starting voltage: 23,000 V Color temperature :6500K Effective lifespan: 500 hours Operating temperature: 150℃ Origin: The United States Packaging :1 piece per box DAVINCI and OLYMPUS ILV-C1 endoscope Y1566 with 300W xenon lamp, PE300B-10F Excellent USHIO EFR 15V150W bulb,

Y1964 Xenon Lamp Applicable To Excelitas Technologies 300W Typical Uses: Fiber optic illumination, analytical instruments, endoscopy/laparoscopy, microscopy Use this light only in appropriate equipment with proper safety precautions Radiant output 75W Light engine Ceramic Xenon Reflector Parabolic Average rated life 1000 hours

PMS7003 PMS7003M PMS5003 Digital universal particle concentration sensor PMS7003: Main characteristics: Zero false alarm rate Real-time response Correct data Minimum distinguishable particle diameter :0.3 micrometer High anti-interference performance because of the patent structure of six sides shielding Optional direction of air inlet and outlet in order to adapt the different design Very Slim Overview: PMS7003 is a kind of digital and universal particle concentration sensor

Industrial-grade blackbody infrared light source featuring 0.45W output power, 2-14μm wavelength range, and fast electrical modulation without chopper wheels. High emissivity, IEC 60721-3-7 M3 certified, with robust MEMS design for long service life and low power consumption in demanding applications.

PMSX003-N PMSX003 Laser particulate matter sensor ➢ Main features: The principle of laser scattering enables precise measurement Zero error alarm rate Real-time response and support continuous collection The minimum resolution particle size is 0.3µm Dual air duct selection for fan and air pump, with selectable flow rate The dual laser design enhances the detection of large particles and can output TSP data It can be applied outdoors and has a wide temperature range Accurate

S11156-2048-02 CCD Linear Image Sensor Back Illuminated With Electronic Shutter The S11156-2048-02 is a back-illuminated CCD linear image sensor with built-in electronic shutter for spectrometers. The image sensor uses a resistive gate structure for high-speed transmission. The pixel length meets the requirements of spectrometers, but the image delay is low during readout. The image delay is reduced by nearly 10 orders of magnitude compared to the previous generation (S11156

PMSX003N-TSP PMSX003 ParticleSensor With Fan Laser Scattering Principle ➢ Main features ◆ Laser scattering principle for accurate measurement ◆ Zero false alarm rate ◆ Real-time response and support for continuous collection ◆ Minimum resolution particle size 0.3µm ◆ Fan and air pump dual air duct selection, optional flow rate ◆ Dual laser design enhances large particle detection, can output TSP data ◆ Can be used outdoors, wide temperature range TSP effective range 0~2000μg

Product Description: YJJ HAS400-S/SP50 Current Sensor Features An Open-loop Hall Effect With A Rated Current Of 400A And An Accuracy Of 1% Features: HAS series current sensors have insulation between the primary side and the secondary side, and are used to measure direct current, alternating current and pulse current. LEM HAS50-S in stock. HAS50-S is from the Swiss LEM HAS series 50A - 600A, brand new original HAS 50-S. The HAS series models include: HAS 50-S, HAS 50-S/SP50,

OPC-N3 PM2.5 Particle Sensor Dust sensor Laser sensor Atmospheric particle monitors Schematic Diagram * PM1 , PM2.5 and PM10 * Reduced power standby mode * Capability to measure up to 2,000 µ g/m 3 * Onboard temperature and humidity sensor * SPI interface not included, order code 000-0SPI-00 OPC-N3 PM2.5 Particle Sensor MEASUREMENT Particle range Spherical equivalent size (based on RI of 1.5, S of 1.65) 0.38 to 40 Size categorisation Number of software bins 24 Sampling

Product Description: PMSX003 Climbing Vine Particulate Matter laser Sensor Is Specifically Designed For Outdoor Use And Accurately Measures PM10 Features: PMSX003 is a digital universal particulate matter sensor based on the principle of laser scattering. It can continuously collect and calculate the number of suspended particles of different sizes in a unit volume of air, that is, the particulate matter concentration distribution, and then convert it into mass concentration

S11106-10 CMOS Linear Image Sensor Compact size Cost Effective Resin Sealed Type Small size and high cost performance The S11106-10 is a resin-sealed CMOS linear image sensor that provides a 10 MHz video data rate and low current consumption. Features - Small size, high cost performance - Resin-sealed, surface mount package: 2.4 × 9.1 × 1.6 t mm - Pixel size: 63.5 × 63.5 μm - 128 pixels - High-speed data rate: 10 MHz maximum - 3 V or 5 V single power supply operation - Built

G9212-512S In GaAs Linear Image Sensors Near Infrared Image Sensors The G9211 to G9214/G9205 to G9208 series InGaAs linear image sensors are specifcally designed for near infrared multi. channel spectrophotometry. These linear image sensors consist of an InGaAs photodiode array, a charge amplifier array, an offset compensation circuit, a shift register and a timing generator formed on a CMOs chip. The charge amplifer array is made up of CMOS transistors connected to each

Product Description: LSA1A Limit Switch The Travel Switch Is Used To Detect The Position Of The Moving Device Features: Limit Switch LSA1A is a limit switch or travel switch used to detect the position of a moving device. Travel range: Indicates the range of motion that the switch can detect, usually in inches or millimeters (mm). Mode of action: It may be a different mode of action such as single pole single knife (SPST) or double pole double knife (DPDT).