Seamless Carbon Steel Pipe

ASTM A556/A556M SPECIFICATION FOR SEAMLESS COLD-DRAWN CARBON STEEL FEEDWATER HEATER TUBES Scope 1.1 This specification covers minimum-wall-thickness, seamless cold-drawn carbon steel tubes including bending into the from of u-tubes, if specified, for use in tubular feedwater heaters. 1.2 The tubing sizes covered shall be 5/8 to 1 2/4-in. [15.9 to 31.8-mm] outside diameter, inclusive, with minimum wall thicknesses equal to or greater than 0.045 in. [1.1 mm]. 1.3 optional

ASTM A252 Welded&Seamless Carbon Steel Pipe ASTM A252 is the standard specification for welded and seamless steel pipe piles. It covers the nominal wall thickness of cylinder shape steel pipe, rectangular pipe is not included. These round pipes are used for piling purposes, playing as a permanent role of load carrying and bearing the pressure. Further more, to act as a tank shell to fill with the concrete piles at sight of the project. This standard stated the values units in

SA 179 Tubes/ASTM A179 Tubing for Heat Exchanger ASTM A179 (SA 179) standard specification covers seamless cold drawn low carbon steel pipe, for tubular heat exchanger, condensers and other similar heat transfer equipment. The ASTM A179 tube covers the OD from 1/8” to 3”, which is 3.2m m to 76.2 mm. Other diameters and thickness smaller than the specified sizes also applicable to this standard, but mechanical properties is not applicable for the size smaller than 1/8” and 3.2

Product Description: Seamless Carbon Steel Pipe is an essential product for construction structure. The carbon steel pipe is invoiced by actual weight and made of high quality carbon steel plate. It is processed with cold rolled, hot rolled or forged technology, and hot dipped galvanized zinc coated to meet the needs of customers for its strength and corrosion resistance. It has wide applications in various industries, such as in plumbing, heating, and mechanical parts.

Product Description: Seamless Carbon Steel Pipe is one of the most popular products in the steel industry. It is made of high quality carbon steel, and it is processed through advanced techniques such as cold rolling, hot rolling, and forging. Its standard is ASTM, DIN, GB, EN, JIS, etc. It can be made in random length or fixed length, and invoiced by actual weight. Seamless Carbon Steel Pipe is widely used in construction structure, like construction scaffolding, bridge,

Product Description: Seamless Carbon Steel Pipe, with its superior strength and advanced technology, is the ideal choice for Carbon Steel Pipe Fitting and Carbon Seamless Steel Pipe applications. It is a corrosion-resistant alloy that provides superior strength and durability. It is made of high-quality Carbon Steel Seamless Tube with Wall Thickness ranging from 0.25mm to 5.0mm, and is available in Cold Rolled and Hot Rolled techniques. The Carbon Steel Seamless Tube is

SA 179 Tubes/ASTM A179 Tubing for Heat Exchanger ASTM A179 (SA179) standard specification covers seamless cold drawn low carbon steel pipe, for tubular heat exchanger, condensers and other similar heat transfer equipment. The ASTM A179 tube covers the OD from 1/8" to 3", which is 3.2mm to 76.2mm. Other diameters and thickness smaller than the specified sizes also applicable to this standard, but mechanical properties is not applicable for the size smaller than 1/8" and 3.2mm,

Product Description: Our seamless carbon steel pipes are made with high quality materials and are designed to meet various standards for thickness, wall thickness, special pipes and treatment. This carbon steel seamless pipe is available in 0.25mm to 5.0mm wall thickness, Mill Edge Slit Edge and other specifications up to 323.9. It is ideal for cold rolled and hot rolled seamless steel pipe, API pipe, thick wall pipe and other applications. We use advanced production

Product Description: Seamless Carbon Steel Pipe is a kind of tubing with carbon steel construction which is typically used for low-pressure applications. It is manufactured through a cold-drawn process which makes it strong and durable. Its unique shape allows for welding, cutting and other processing services, while its special thick wall pipe ensures high-pressure performance. It is invoiced by its actual weight and is available in round shape. It is often used in the

Product Description: Seamless Carbon Steel Pipe is made of carbon steel material, which is a kind of alloy steel formed by adding other elements such as manganese, silicon, and copper to ordinary carbon steel. It is a kind of metal material with high strength, good plasticity, and good weldability. It is widely used for manufacturing various industrial parts and components. The carbon steel pipe is made of high-quality carbon steel material, which is then hot-dipped

Product Description: Seamless Carbon Steel Pipe is manufactured out of high grade carbon steel and possesses superior qualities such as being highly resistant to corrosion, being resistant to wear and tear, having a high strength-to-weight ratio, and having exceptional thermal conductivity. This type of pipe is commonly used for transportation of oil and gas, water, and other fluids in both the industrial and commercial sectors. It is available in various sizes, grades, and

Product Description: This product is ASTM A106 GR.B Seamless Carbon Steel Pipe. With a specification of 323.9, this black pipe features a mill edge slit edge and its weight is measured by actual weight. This carbon seamless steel pipe is perfect for various industrial applications such as transportation of oil and gas, structure pipe, fluid pipe, line pipe and more. It is made of high-strength and corrosion-resistant carbon steel, which ensures superior durability and long

ASTM A53 Welded&Seamless Carbon Steel Pipe ASTM A53 seamless and welded steel pipe is a general, all-purpose pipe. Designed for coiling, bending and flanging, A53 carbon steel pipe is suitable for welding. The grades denote certain chemical and mechanical properties and should be noted in selection. A53 pipe is intended for mechanical and pressure applications and is also acceptable for ordinary uses in steam, water, gas and air lines, Low pressure systems, Structural

Product Description: Seamless Carbon Steel Pipe is made of high-quality carbon steel and manufactured by hot-dipped galvanized zinc coating process. It is available in different standards such as ASTM, DIN, GB, EN, JIS, etc. and thickness ranges from 0.3-6mm. It is available in various processing techniques such as cold rolled, hot rolled, and forged. It is available in round shape. The Seamless Carbon Steel Pipe is perfect for making Carbon Steel Pipe Tee, Carbon Steel Pipe

Product Description: Seamless Carbon Steel Pipe is a type of carbon steel pipe and metal alloy material. It is a common material in the industrial field and is widely used in various mechanical and chemical industries. It is made of one or more pieces of carbon steel plate and is usually hot-dip galvanized or coated with a protective zinc layer. The end protector comes with a plastic cap, and the invoicing is by actual weight. The manufacturing process is cold drawn, and the

ASTM A192 / A192M Seamless Carbon Steel Boiler Tubes for High-Pressure Service ASTM A 192 boiler tube equivalent EN 10216-2, DIN 17175, BS 3059 Part II, NF A 49-213, NBR 5594 ASTM (American Society for Testing Materials standard) A192 and ASME (American Society of Mechanical Engineers standards) SA192. Equivalent Materials 1010, St35.8, 360. FASTWELL has standard specifications for minimum-wall-thickness, seamless carbon steel boiler and super heater tubes for high-pressure

Product Description: Seamless Carbon Steel Pipe is a type of steel pipe made of steel that has been hot rolled or cold drawn into a variety of shapes, including round, square, hexgonal, billet, and carbon steel pipe tee. It is widely used in construction structure due to its strength and durability. The thickness of the seamless carbon steel pipe ranges from 0.3mm to 6mm. Seamless Carbon Steel Pipe features high pressure, corrosion resistance, and heat resistance. It is an

Product Description: Seamless Carbon Steel Pipe Seamless Carbon Steel Pipe is a kind of pipe fitting used for connecting pipes of different diameters and find wide applications in construction structure projects. It is made of carbon steel material and features end protector of plastic cap. It is processed with cold rolled, hot rolled or forged technique and its section shape is round. It can be used for welding and cutting services. The Carbon Steel Pipe Tee is a kind of

Product Description: Seamless Carbon Steel Pipe is a kind of high pressure seamless steel pipe which is made through cold rolling or cold drawn process. It has a wide range of wall thickness, its grade group includes API J55-API P110, 16Mn, and its tolerance is OD.+/-0.25mm; W.T +/0.25mm; L +/-50mm. The wall thickness of the seamless carbon steel pipe ranges from 0.25mm to 5.0mm. This kind of steel pipe is commonly used in many fields, such as in high pressure applications,

ASTM A333 Carbon Steel Tubes ASTM A333 is the standard specification for seamless and welded steel pipe for application in low temperature services and other applications with the required notch toughness. Manufacturing Types Parameter Details Manufacture Hot Rolled Grade Group API J55-API P110, 16Mn Specification 323.9 Treatment Cold Rolled / Hot Rolled Special Pipe API Pipe, Thick Wall Pipe, Other Manufacture Techinique Seamless Cold Drawn And Cold Rolling Delivery